[Nocrancid] autopop-onenet.net router config diffs

rancid at rancid.noc.onenet.net rancid at rancid.noc.onenet.net
Fri Nov 26 14:34:08 CST 2010


Index: configs/hub.say.onenet.net
===================================================================
retrieving revision 1.1287
diff -u -4 -r1.1287 hub.say.onenet.net
@@ -885,8 +885,9 @@
   no ip redirects
   no ip proxy-arp
   encapsulation ppp
   ip route-cache flow
+  no fair-queue
   ppp multilink
   multilink-group 2
  !
  interface Serial3/1/0/9:0
Index: configs/hub.ton.onenet.net
===================================================================
retrieving revision 1.201
diff -u -4 -r1.201 hub.ton.onenet.net
@@ -31,9 +31,15 @@
  !NAME: "WS-C6000-CL 2", DESCR: "C6K Clock FRU 2"
  !PID: WS-C6000-CL       , VID:    , SN: SMT0825J493
  !
  !NAME: "1", DESCR: "WS-X6K-S2U-MSFC2 2 ports Catalyst 6000 supervisor 2 Rev. 3.15"
- !PID: WS-X6K-S2U-MSFC2  , VID:    , SN: SAL06468C0E
+ !PID: WS-X6K-S2U-MSFC2  , VID:    , SN: SAL08465WKK
+ !
+ !NAME: "msfc sub-module of 1", DESCR: "WS-F6K-MSFC2 Cat6k MSFC 2 daughterboard Rev. 2.9"
+ !PID: WS-F6K-MSFC2      , VID:    , SN: SAL08455SS2
+ !
+ !NAME: "switching engine sub-module of 1", DESCR: "WS-F6K-PFC2 Policy Feature Card 2 Rev. 3.5"
+ !PID: WS-F6K-PFC2       , VID:    , SN: SAL084355DA
  !
  !NAME: "2", DESCR: "WS-X6K-S2U-MSFC2 2 ports Catalyst 6000 supervisor 2 Rev. 3.15"
  !PID: WS-X6K-S2U-MSFC2  , VID:    , SN: SAL06468C0E
  !
@@ -148,9 +154,72 @@
  !NAME: "Physical Slot 1", DESCR: "Cisco Systems Catalyst 6500 9-slot Physical Slot"
  !PID:                   , VID:    , SN:            
  !
  !NAME: "1", DESCR: "WS-X6K-S2U-MSFC2 2 ports Catalyst 6000 supervisor 2 Rev. 3.15"
- !PID: WS-X6K-S2U-MSFC2  , VID:    , SN: SAL06468C0E
+ !PID: WS-X6K-S2U-MSFC2  , VID:    , SN: SAL08465WKK
+ !
+ !NAME: "MSFC Container 1", DESCR: "MSFC Container"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "msfc sub-module of 1", DESCR: "WS-F6K-MSFC2 Cat6k MSFC 2 daughterboard Rev. 2.9"
+ !PID: WS-F6K-MSFC2      , VID:    , SN: SAL08455SS2
+ !
+ !NAME: "module 1 RP outlet temperature Sensor", DESCR: "module 1 RP outlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 RP inlet temperature Sensor", DESCR: "module 1 RP inlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "CPU of Routing Processor 1", DESCR: "CPU of Routing Processor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "Switching Engine Container 1", DESCR: "Switching Engine Container"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "switching engine sub-module of 1", DESCR: "WS-F6K-PFC2 Policy Feature Card 2 Rev. 3.5"
+ !PID: WS-F6K-PFC2       , VID:    , SN: SAL084355DA
+ !
+ !NAME: "module 1 EARL outlet temperature Sensor", DESCR: "module 1 EARL outlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 EARL inlet temperature Sensor", DESCR: "module 1 EARL inlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "Gigabit Port Container 1/1", DESCR: "Gigabit Port Container"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "Gi1/1", DESCR: "1000BaseZX"
+ !PID:                   , VID:    , SN: ECL122902EK     
+ !
+ !NAME: "Gigabit Port Container 1/2", DESCR: "Gigabit Port Container"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "Gi1/2", DESCR: "1000BaseT"
+ !PID:                   , VID:    , SN: FHH1239T0TM     
+ !
+ !NAME: "module 1 power-output-fail Sensor", DESCR: "Supervisor module 1 power-output-fail Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 insufficient cooling Sensor", DESCR: "Supervisor module 1 insufficient cooling Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 fan-upgrade required Sensor", DESCR: "Supervisor module 1 fan-upgrade required Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 outlet temperature Sensor", DESCR: "Supervisor module 1 outlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 inlet temperature Sensor", DESCR: "Supervisor module 1 inlet temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 device-1 temperature Sensor", DESCR: "Supervisor module 1 device-1 temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "module 1 device-2 temperature Sensor", DESCR: "Supervisor module 1 device-2 temperature Sensor"
+ !PID:                   , VID:    , SN:            
+ !
+ !NAME: "CPU of Switching Processor 1", DESCR: "CPU of Switching Processor"
+ !PID:                   , VID:    , SN:            
  !
  !NAME: "Physical Slot 2", DESCR: "Cisco Systems Catalyst 6500 9-slot Physical Slot"
  !PID:                   , VID:    , SN:            
  !
@@ -556,21 +625,32 @@
  !
  !end show inventory
  !show cdp neighbor:
  !port 5/7 connects to  Tonkawa-PS.onenet.net port 0/1
+ !port 1/1 connects to  onenethub-poncacity.onenet.net port 2/1
  !end show cdp neighbor
  !
  !BootFlash: BOOT variable = disk0:,1;
  !BootFlash: CONFIG_FILE variable = 
  !BootFlash: BOOTLDR variable = bootflash:c6msfc2-boot-mz.121-11b.EX1
  !BootFlash: Configuration register is 0x2102
- !BootFlash: Standby is not up.
+ !BootFlash: Standby is up
+ !BootFlash: Standby has 458752K/65536K bytes of memory.
+ !BootFlash: Standby BOOT variable does not exist
+ !BootFlash: Standby CONFIG_FILE variable does not exist
+ !BootFlash: Standby BOOTLDR variable does not exist
+ !BootFlash: Standby Configuration register is 0x2102 
  !
  !BootFlash: BOOT variable = disk0:,1;
  !BootFlash: CONFIG_FILE variable = 
  !BootFlash: BOOTLDR variable = bootflash:c6msfc2-boot-mz.121-11b.EX1
  !BootFlash: Configuration register is 0x2102
- !BootFlash: Standby is not up.
+ !BootFlash: Standby is up
+ !BootFlash: Standby has 458752K/65536K bytes of memory.
+ !BootFlash: Standby BOOT variable does not exist
+ !BootFlash: Standby CONFIG_FILE variable does not exist
+ !BootFlash: Standby BOOTLDR variable does not exist
+ !BootFlash: Standby Configuration register is 0x2102 
  !
  !Flash: Open device slot0 failed (No such device)
  !Flash: (Try device DISK: for ATA media.)
  !


More information about the Nocrancid mailing list