[Nocrancid] autopop-onenet.net router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Mon Aug 24 02:02:04 CDT 2015
Index: configs/hub.chi.onenet.net
===================================================================
--- configs/hub.chi.onenet.net (revision 131299)
+++ configs/hub.chi.onenet.net (working copy)
@@ -294,7 +294,7 @@
#t1-2/0/2:1 up up
#t1-2/0/2:1.16 up up
#t1-2/0/2:1.17 up up
-#t1-2/0/2:2 down up
+#t1-2/0/2:2 down down
#t1-2/0/2:3 down down
#t1-2/0/2:4 down down
#t1-2/0/2:5 down down
Index: configs/opt3.tul.onenet.net
===================================================================
--- configs/opt3.tul.onenet.net (revision 131304)
+++ configs/opt3.tul.onenet.net (working copy)
@@ -0,0 +1,30 @@
+<!-- ONS15454 -->
+<opt>
+ <part description="ONS15454" hw_version="A0" part_id="15454-SA-ANSI" part_num="800-19857-05" serial_number="SMA07500693" slot="BP" vendor_id="Cisco">
+ <part name="SLOT-1" description="DS1-14" hw_version="A0" part_id="DS1-14" part_num="800-18582-02" serial_number="SAG07477TZ3" slot="SLOT-1" vendor_id="Cisco"></part>
+ <part name="SLOT-3" description="DS1N-14" hw_version="A0" part_id="DS1N-14" part_num="800-18583-02" serial_number="SAG0802801B" slot="SLOT-3" vendor_id="Cisco"></part>
+ <part name="SLOT-4" description="15454-10E-L1-C" hw_version="A1" part_id="15454-10E-L1-C 1529.55" part_num="800-26772-03" serial_number="CAT1240B14H" slot="SLOT-4" vendor_id="Cisco" temp_channel="1538.98">
+ <part name="PPM-4-1" description="ONS-XC-10G-S1" hw_version="B2" part_id="10G-SR-10GBASE-LR-1310nm" part_num="10-2012-03" serial_number="ECL152001PR" slot="PPM-4-1" vendor_id="Cisco"></part>
+ <interface name="CHAN-4-2" abbr_name="CHAN-4-2" admin_state="up" spanning_tree_metric="" description="" type="TXP" monitoring_state="monitor"></interface>
+ <interface name="FAC-4-1-1" abbr_name="FAC-4-1-1" admin_state="up" spanning_tree_metric="" description="" type="FAC" monitoring_state="monitor"></interface>
+ <interface name="VFAC-4-2" abbr_name="VFAC-4-2" admin_state="up" spanning_tree_metric="" description="" type="VFAC" monitoring_state="monitor"></interface>
+ </part>
+ <part name="SLOT-5" description="OC-192SR/STM-64IO" hw_version="B0" part_id="OC-192SR/STM-64IO" part_num="800-25141-03" serial_number="CAT10305CL7" slot="SLOT-5" vendor_id="Cisco">
+ <interface name="FAC-5-1" abbr_name="FAC-5-1" admin_state="up" spanning_tree_metric="" description="" type="FAC" monitoring_state="monitor"></interface>
+ </part>
+ <part name="SLOT-6" description="OC-192SR/STM-64IO" hw_version="D0" part_id="OC-192SR/STM-64IO" part_num="800-09258-01" serial_number="CNH0809009B" slot="SLOT-6" vendor_id="Cisco">
+ <interface name="FAC-6-1" abbr_name="FAC-6-1" admin_state="up" spanning_tree_metric="" description="" type="FAC" monitoring_state="monitor"></interface>
+ </part>
+ <part name="SLOT-7" description="TCC2" hw_version="A0" part_id="TCC2" part_num="800-20761-02" serial_number="SAG07477SDC" slot="SLOT-7" vendor_id="Cisco"></part>
+ <part name="SLOT-8" description="XC10G" hw_version="A0" part_id="XC10G" part_num="800-19977-04" serial_number="SAG075181Q1" slot="SLOT-8" vendor_id="Cisco"></part>
+ <part name="SLOT-10" description="XC10G" hw_version="A0" part_id="XC10G" part_num="800-19977-04" serial_number="SAG07507Z1C" slot="SLOT-10" vendor_id="Cisco"></part>
+ <part name="SLOT-11" description="TCC2" hw_version="A0" part_id="TCC2" part_num="800-20761-02" serial_number="SAG07447JR9" slot="SLOT-11" vendor_id="Cisco"></part>
+ <part name="SLOT-12" description="OC-192SR/STM-64IO" hw_version="D0" part_id="OC-192SR/STM-64IO" part_num="800-09258-01" serial_number="CNH080900AT" slot="SLOT-12" vendor_id="Cisco">
+ <interface name="FAC-12-1" abbr_name="FAC-12-1" admin_state="up" spanning_tree_metric="" description="" type="FAC" monitoring_state="monitor"></interface>
+ </part>
+ <part name="SLOT-15" description="DS3N-12E" hw_version="C0" part_id="DS3N-12E" part_num="800-23516-01" serial_number="SAG07497X77" slot="SLOT-15" vendor_id="Cisco"></part>
+ <part name="SLOT-17" description="DS3-12E" hw_version="C0" part_id="DS3-12E" part_num="800-23515-01" serial_number="SAG07477TS5" slot="SLOT-17" vendor_id="Cisco"></part>
+ <part name="AIP" description="AIP" hw_version="A1" part_id="AIP" part_num="73-7665-01" serial_number="SMA07445945" slot="AIP" vendor_id="Cisco"></part>
+ <part name="FAN-1" description="FTA" hw_version="A0" part_id="FTA" part_num="800-21448-03" serial_number="SMA07521220" slot="FAN-1" vendor_id="Cisco"></part>
+ </part>
+</opt>
\ No newline at end of file
Index: configs/core1.lan-mx80.onenet.net
===================================================================
--- configs/core1.lan-mx80.onenet.net (revision 131299)
+++ configs/core1.lan-mx80.onenet.net (working copy)
@@ -197,7 +197,7 @@
# -rw-rw---- 1 root field 52711424 Jun 10 15:37 ifinfo.core.1
# -rw-rw---- 1 root field 52711424 Jun 10 15:40 ifinfo.core.2
# -rw-rw---- 1 root field 52711424 Jun 10 15:47 ifinfo.core.3
-# -rw-rw---- 1 root field 52711424 Aug 24 01:00 ifinfo.core.4
+# -rw-rw---- 1 root field 52711424 Aug 24 02:00 ifinfo.core.4
# drwxrwxrwx 2 root wheel 512 Aug 13 2012 install/
# -rw-r--r-- 1 eng field 99542994 May 30 2013 jinstall-ppc-11.4R7.5-domestic-signed.tgz
# -rw-r--r-- 1 upgrades field 150276951 Aug 8 2014 jinstall-ppc-12.3R7.7-domestic-signed.tgz
Index: configs/hub.tsb.onenet.net
===================================================================
--- configs/hub.tsb.onenet.net (revision 131299)
+++ configs/hub.tsb.onenet.net (working copy)
@@ -200,7 +200,7 @@
# -rw-rw---- 1 root field 51994624 Oct 24 2013 ifinfo.core.1
# -rw-rw---- 1 root field 51974144 Oct 24 2013 ifinfo.core.2
# -rw-rw---- 1 root field 52744192 Oct 24 2013 ifinfo.core.3
-# -rw-rw---- 1 root field 52727808 Aug 24 01:00 ifinfo.core.4
+# -rw-rw---- 1 root field 52727808 Aug 24 02:00 ifinfo.core.4
# drwxrwxrwx 2 root wheel 512 Oct 12 2012 install/
# -rw-rw---- 1 root field 33464320 Mar 3 2014 jdiameterd.core.0
# -rw-r--r-- 1 eng field 99542994 Apr 23 2013 jinstall-ppc-11.4R7.5-domestic-signed.tgz
Index: configs/hub.dur.onenet.net
===================================================================
--- configs/hub.dur.onenet.net (revision 131286)
+++ configs/hub.dur.onenet.net (working copy)
@@ -377,7 +377,7 @@
#fe-2/1/1.0 up up
#fe-2/1/2 up up
#fe-2/1/2.0 up up
-#fe-2/1/3 down down
+#fe-2/1/3 down up
#ge-2/2/0 down down
#pc-2/2/0 up up
#pc-2/2/0.16383 up up
Index: configs/core3.okc-m120.onenet.net
===================================================================
--- configs/core3.okc-m120.onenet.net (revision 131276)
+++ configs/core3.okc-m120.onenet.net (working copy)
@@ -933,8 +933,8 @@
#ct3-2/3/0:12 up up
#t1-2/3/0:12:1 up down
#t1-2/3/0:12:2 up down
-#t1-2/3/0:12:3 up up
-#t1-2/3/0:12:3.0 up up
+#t1-2/3/0:12:3 up down
+#t1-2/3/0:12:3.0 up down
#t1-2/3/0:12:4 down down
#t1-2/3/0:12:5 down down
#t1-2/3/0:12:6 up down
Index: configs/onenet-dc-xg210.nid.onenet.net
===================================================================
--- configs/onenet-dc-xg210.nid.onenet.net (revision 131308)
+++ configs/onenet-dc-xg210.nid.onenet.net (working copy)
@@ -0,0 +1,2118 @@
+# RANCID-CONTENT-TYPE: fsp150
+#
+# ADVA--> show running-config current
+Preparing configuration file...
+#
+#CLI:SUBNETWORK Edit
+#
+home
+configure system
+ prompt "ADVA"
+#
+#CLI:SYSTEM Edit
+#
+home
+configure system
+ auth-traps disabled
+ serial enabled
+ serial-disconnect-logoff enabled
+ http enabled
+ https enabled
+ telnet disabled
+ scp enabled
+ ftp disabled
+ sftp enabled
+ security-banner "This is a private system. Unauthorized access or use may lead to prosecution."
+ security-prompt disabled
+ ssh enabled
+ snmp-engine-id "800009f0030080ea682000"
+ log-server-method user-defined
+ ntp-server-method user-defined
+ time-zone
+ dst-control enabled
+ utc-offset "-06:00"
+ dst-utc-offset "+01:00"
+ dst-start-month march
+ dst-end-month november
+ dst-start-day "SUNDAY>=8"
+ dst-end-day "SUNDAY<=7"
+ dst-start-time "02:00"
+ dst-end-time "02:00"
+ back
+ proxy-arp disabled
+ proxy-ndp disabled
+ ipv6-fwd disabled
+ alarm-attributes system prim-ntp-svr-fail nsa mn
+ alarm-attributes system bkup-ntp-svr-fail nsa mn
+ alarm-attributes system swdl-filetransfer-ip nsa nr
+ alarm-attributes system swdl-install-ip nsa nr
+ alarm-attributes system swdl-activation-ip nsa nr
+ alarm-attributes system swdl-validation-ip nsa nr
+ alarm-attributes system db-filetransfer-ip nsa nr
+ alarm-attributes system snmp-dg-host-unreachable nsa mn
+ alarm-attributes system snmp-dg-res-busy nsa mn
+ alarm-attributes system ip-address-conflict sa cr
+ alarm-attributes system db-downgrade nsa nr
+ alarm-attributes system filetransfer-ip nsa nr
+ alarm-attributes system operation-ip nsa nr
+ alarm-attributes system ltp-failure sa mj
+ alarm-attributes system ltp-in-progress nsa na
+ alarm-attributes system learn-table-full sa cr
+ alarm-attributes system ipv6-addr-conflict sa cr
+ alarm-attributes system dataexport-ftp-fail nsa mn
+ alarm-attributes fan comm-failed nsa mn
+ alarm-attributes fan eqpt-flt nsa mn
+ alarm-attributes fan mismatch nsa mn
+ alarm-attributes fan eqpt-rmvd nsa mn
+ alarm-attributes psu comm-failed nsa mn
+ alarm-attributes psu eqpt-flt nsa mn
+ alarm-attributes psu mismatch nsa mn
+ alarm-attributes psu eqpt-rmvd nsa mn
+ alarm-attributes psu pwr-no-input-or-unit-fault nsa mn
+ alarm-attributes access-port efm-oam-dying-gasp sa cr
+ alarm-attributes access-port efm-fail sa mn
+ alarm-attributes access-port efm-rce sa mn
+ alarm-attributes access-port efm-rld sa mn
+ alarm-attributes access-port efm-rls sa mn
+ alarm-attributes access-port lnkdn-deact sa cr
+ alarm-attributes access-port lnkdn-unisolated sa cr
+ alarm-attributes access-port lnkdn-cbl-flt sa cr
+ alarm-attributes access-port lnkdn-cbl-rmvd sa cr
+ alarm-attributes access-port lnkdn-autoneg-failed sa cr
+ alarm-attributes access-port lnkdn-lpbk-flt sa cr
+ alarm-attributes access-port lnkdn sa cr
+ alarm-attributes access-port rfi sa mn
+ alarm-attributes access-port rx-jabber sa mj
+ alarm-attributes access-port sfp-mismatch sa cr
+ alarm-attributes access-port sfp-rmvd sa cr
+ alarm-attributes access-port sfp-tx-flt sa cr
+ alarm-attributes access-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes access-port syncref nsa mn
+ alarm-attributes access-port esmc-fail nsa mn
+ alarm-attributes access-port ql-mismatch nsa mn
+ alarm-attributes access-port freq-offset nsa mn
+ alarm-attributes access-port sync-ql-invalid nsa mn
+ alarm-attributes access-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes access-port bw-exceeds-neg-speed sa mj
+ alarm-attributes access-port sfp-non-qualified nsa mn
+ alarm-attributes access-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes access-port syncref-locked-out nsa mn
+ alarm-attributes access-port syncref-forced-switch nsa mn
+ alarm-attributes access-port syncref-manual-switch nsa mn
+ alarm-attributes access-port syncref-wtr nsa mn
+ alarm-attributes access-port link-control-protocol-fail nsa mn
+ alarm-attributes access-port link-control-protocol-fail sa cr
+ alarm-attributes access-port link-control-protocol-loopback nsa mn
+ alarm-attributes access-port link-control-protocol-loopback sa cr
+ alarm-attributes access-port test-alarm nsa mj
+ alarm-attributes access-port xfp-tx-fault sa cr
+ alarm-attributes access-port xfp-mismatch sa cr
+ alarm-attributes access-port xfp-non-qualified nsa mn
+ alarm-attributes access-port xfp-removed sa cr
+ alarm-attributes access-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes access-port elmi-not-oper nsa mn
+ alarm-attributes access-port autoneg-bypass nsa mn
+ alarm-attributes access-port amp-no-peer sa mj
+ alarm-attributes access-port amp-prov-fail nsa mn
+ alarm-attributes access-port amp-config-fail sa cr
+ alarm-attributes access-port xfp-wavelength-mismatch sa cr
+ alarm-attributes access-port traff-res-limit-exc nsa mn
+ alarm-attributes access-port traff-res-limit-exc sa cr
+ alarm-attributes network-port forced nsa na
+ alarm-attributes network-port lockout nsa na
+ alarm-attributes network-port efm-oam-dying-gasp nsa mn
+ alarm-attributes network-port efm-oam-dying-gasp sa cr
+ alarm-attributes network-port efm-fail nsa mn
+ alarm-attributes network-port efm-fail sa mn
+ alarm-attributes network-port efm-rce nsa mn
+ alarm-attributes network-port efm-rce sa mn
+ alarm-attributes network-port efm-rld nsa mn
+ alarm-attributes network-port efm-rld sa mn
+ alarm-attributes network-port efm-rls nsa mn
+ alarm-attributes network-port efm-rls sa mn
+ alarm-attributes network-port lnkdn-deact nsa mn
+ alarm-attributes network-port lnkdn-deact sa cr
+ alarm-attributes network-port lnkdn-unisolated nsa mn
+ alarm-attributes network-port lnkdn-unisolated sa cr
+ alarm-attributes network-port lnkdn-lpbk-flt nsa mn
+ alarm-attributes network-port lnkdn-lpbk-flt sa cr
+ alarm-attributes network-port lnkdn nsa mn
+ alarm-attributes network-port lnkdn sa cr
+ alarm-attributes network-port rfi nsa mn
+ alarm-attributes network-port rfi sa mn
+ alarm-attributes network-port rx-jabber nsa mn
+ alarm-attributes network-port rx-jabber sa mj
+ alarm-attributes network-port rmt-efm-lpbk-fail nsa na
+ alarm-attributes network-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes network-port syncref nsa mn
+ alarm-attributes network-port esmc-fail nsa mn
+ alarm-attributes network-port ql-mismatch nsa mn
+ alarm-attributes network-port freq-offset nsa mn
+ alarm-attributes network-port los sa cr
+ alarm-attributes network-port sync-ql-invalid nsa mn
+ alarm-attributes network-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes network-port bw-exceeds-neg-speed sa mj
+ alarm-attributes network-port syncref-locked-out nsa mn
+ alarm-attributes network-port syncref-forced-switch nsa mn
+ alarm-attributes network-port syncref-manual-switch nsa mn
+ alarm-attributes network-port syncref-wtr nsa mn
+ alarm-attributes network-port link-control-protocol-fail nsa mn
+ alarm-attributes network-port link-control-protocol-fail sa cr
+ alarm-attributes network-port link-control-protocol-loopback nsa mn
+ alarm-attributes network-port link-control-protocol-loopback sa cr
+ alarm-attributes network-port test-alarm nsa mj
+ alarm-attributes network-port xfp-tx-fault nsa mn
+ alarm-attributes network-port xfp-tx-fault sa cr
+ alarm-attributes network-port xfp-mismatch nsa mn
+ alarm-attributes network-port xfp-mismatch sa cr
+ alarm-attributes network-port xfp-non-qualified nsa nr
+ alarm-attributes network-port xfp-removed nsa mn
+ alarm-attributes network-port xfp-removed sa cr
+ alarm-attributes network-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes network-port elmi-not-oper nsa mn
+ alarm-attributes network-port amp-no-peer sa mj
+ alarm-attributes network-port amp-prov-fail nsa mn
+ alarm-attributes network-port amp-config-fail sa cr
+ alarm-attributes network-port xfp-wavelength-mismatch nsa mn
+ alarm-attributes network-port xfp-wavelength-mismatch sa cr
+ alarm-attributes network-port traff-res-limit-exc nsa mn
+ alarm-attributes network-port traff-res-limit-exc sa cr
+ alarm-attributes cfm-mep xcon-ccm sa mn
+ alarm-attributes cfm-mep err-ccm sa mn
+ alarm-attributes cfm-mep rem-ccm sa mn
+ alarm-attributes cfm-mep mac-status sa mn
+ alarm-attributes cfm-mep rdi sa mn
+ alarm-attributes cfm-mep ais sa nr
+ alarm-attributes sync frngsync nsa nr
+ alarm-attributes sync fstsync nsa nr
+ alarm-attributes sync hldovrsync nsa nr
+ alarm-attributes sync losloc nsa nr
+ alarm-attributes sync all-syncref nsa mj
+ alarm-attributes sync avg-hldovr-freq-not-ready nsa nr
+ alarm-attributes sync sync-not-ready nsa nr
+ alarm-attributes bits-in-port ais nsa nr
+ alarm-attributes bits-in-port syncref nsa mn
+ alarm-attributes bits-in-port ql-mismatch nsa mn
+ alarm-attributes bits-in-port freq-offset nsa mn
+ alarm-attributes bits-in-port los nsa mn
+ alarm-attributes bits-in-port lof nsa mn
+ alarm-attributes bits-in-port sync-ql-invalid nsa mn
+ alarm-attributes bits-in-port syncref-locked-out nsa mn
+ alarm-attributes bits-in-port syncref-forced-switch nsa mn
+ alarm-attributes bits-in-port syncref-manual-switch nsa mn
+ alarm-attributes bits-in-port syncref-wtr nsa mn
+ alarm-attributes bits-out-port ql-squelch nsa mn
+ alarm-attributes cfm-qos-shaper shaper-btd nsa na
+ alarm-attributes dcn-port lnkdn nsa na
+ alarm-attributes 10mhz-port syncref nsa mn
+ alarm-attributes 10mhz-port freq-offset nsa mn
+ alarm-attributes 10mhz-port los nsa mn
+ alarm-attributes 10mhz-port ql-squelch nsa mn
+ alarm-attributes 10mhz-port syncref-locked-out nsa mn
+ alarm-attributes 10mhz-port syncref-forced-switch nsa mn
+ alarm-attributes 10mhz-port syncref-manual-switch nsa mn
+ alarm-attributes 10mhz-port syncref-wtr nsa mn
+ alarm-attributes lag lnkdn-deact sa cr
+ alarm-attributes lag lnkdn sa cr
+ alarm-attributes lag link-control-protocol-fail nsa mn
+ alarm-attributes lag link-control-protocol-fail sa cr
+ alarm-attributes lag link-control-protocol-loopback nsa mn
+ alarm-attributes lag link-control-protocol-loopback sa cr
+ alarm-attributes shelf-xg210 overtemp nsa mn
+ alarm-attributes shelf-xg210 undertemp nsa mn
+ alarm-attributes shelf-xg210 overvoltage nsa mn
+ alarm-attributes shelf-xg210 undervoltage nsa mn
+ alarm-attributes ntexg210 comm-failed nsa mn
+ alarm-attributes ntexg210 eqpt-flt sa cr
+ alarm-attributes ntexg210 mismatch sa cr
+ alarm-attributes ntexg210 eqpt-rmvd sa cr
+ alarm-attributes ntexg210 test-alarm nsa mj
+ alarm-attributes xg-1x-cc eqpt-flt sa cr
+ alarm-attributes xg-1x-cc mismatch sa cr
+ alarm-attributes xg-1x-cc eqpt-rmvd sa cr
+ alarm-attributes xg-1x-cc test-alarm nsa mj
+ alarm-attributes xg-1s-cc eqpt-flt sa cr
+ alarm-attributes xg-1s-cc mismatch sa cr
+ alarm-attributes xg-1s-cc eqpt-rmvd sa cr
+ alarm-attributes xg-1s-cc test-alarm nsa mj
+ alarm-attributes ge-8s-cc eqpt-flt sa cr
+ alarm-attributes ge-8s-cc mismatch sa cr
+ alarm-attributes ge-8s-cc eqpt-rmvd sa cr
+ alarm-attributes ge-8s-cc test-alarm nsa mj
+ alarm-attributes slot intctneqpt nsa mn
+ alarm-attributes slot forced-offline nsa mn
+ alarm-attributes slot forced-offline sa cr
+ alarm-attributes time-of-day-port ql-squelch nsa mn
+ alarm-attributes pps-port ql-squelch nsa mn
+ alarm-attributes ge-8e-cc eqpt-flt sa cr
+ alarm-attributes ge-8e-cc mismatch sa cr
+ alarm-attributes ge-8e-cc eqpt-rmvd sa cr
+ alarm-attributes ge-8e-cc test-alarm nsa mj
+ alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+ syslog-server 1
+ configure ip-version ipv4
+ back
+ syslog-server 2
+ configure ip-version ipv4
+ back
+ syslog-server 3
+ configure ip-version ipv4
+ back
+ audit-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ security-log
+ syslog-control disabled
+ back
+ alarm-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ ntp-client
+ control enabled
+ polling-interval 16
+ primary-server ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ primary-server ipv4 164.58.3.98
+ backup-server ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ backup-server ipv4 0.0.0.0
+ back
+ acl-entry 1
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 2
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 3
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 4
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 5
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 6
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 7
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 8
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 9
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 10
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ system-tod-type ntp
+#
+#CLI:SECURITY SYSTEM Edit
+#
+home
+configure user-security
+ access-order local
+ auth-protocol radius
+ auth-type pap
+ nas-ip-address 10.199.192.2
+ nas-ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ security-strength high
+ accounting disabled
+ config-ssl-strength low
+ tacacs-privilege-control enabled
+ security-trap-type disabled
+ config-rap 1
+ ip-address 156.110.31.11
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order first
+ timeout 3
+ retries 5
+ control enabled
+ ip-version ipv4
+ back
+ config-rap 2
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order second
+ timeout 3
+ retries 5
+ ip-version ipv4
+ back
+ config-rap 3
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order third
+ timeout 3
+ retries 5
+ ip-version ipv4
+#
+#CLI:ENV ALARM INPUT-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-1
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-2
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-3
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-4
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:MANAGEMENT TUNNEL-1 Delete
+#
+home
+configure communication
+ delete mgmttnl mgmt_tnl-1
+#
+#CLI:IP SYSTEM Edit
+#
+home
+configure system
+ mgmt-traffic-bridge disabled
+ mgmt-traffic-bridge-security disabled
+#
+#CLI:SAT SYSTEM-1 Edit
+#
+home
+configure sat
+ network-element ne-1
+ configure sat-system
+ ether-type 0x9800
+#
+#CLI:SAT SAC PROFILE-1 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-1
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-2 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-2
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-3 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-3
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-4 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-4
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-5 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-5
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-6 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-6
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-7 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-7
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-8 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-8
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "community" readonly
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "private" readwrite
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "public" readonly
+#
+#CLI:XG 1S CC-1-1-2 Create
+#
+home
+network-element ne-1
+ add eqpt xg_1s_cc 2
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ admin-state in-service
+#
+#CLI:NE-1 Edit
+#
+home
+network-element ne-1
+ prompt "NE-1"
+ name "OneNet-DC-XG210"
+ contact ""
+ location ""
+ pm-interval 15min
+ autoprov-mode on
+ admin-state in-service
+ configure tm-params bwp-mode line-rate
+#
+#CLI:PSU-1-1-1 Create
+#
+home
+network-element ne-1
+ add eqpt psu 1
+ configure psu psu-1-1-1
+ alias ""
+ admin-state in-service
+#
+#CLI:PSU-1-1-2 Create
+#
+home
+network-element ne-1
+ add eqpt psu 2
+ configure psu psu-1-1-2
+ alias ""
+ admin-state in-service
+#
+#CLI:FAN-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure fan fan-1-1-1
+ alias ""
+ admin-state in-service
+#
+#CLI:NTEXG210-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ admin-state in-service
+ alias ""
+ snmp-dying-gasp disabled
+#
+#CLI:ECPA CONFIG-1 Edit
+#
+home
+configure system
+ ecpa-streams 1
+ stream-name "stream-1"
+ framesize 9000
+ rate 64000
+ payload-type fixed
+ dest-mac 00:0b:09:00:00:01
+ outer-vlan-control enabled
+ outer-vlan-tag 500-0
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-2 Edit
+#
+home
+configure system
+ ecpa-streams 2
+ stream-name "stream-2"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-3 Edit
+#
+home
+configure system
+ ecpa-streams 3
+ stream-name "stream-3"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-4 Edit
+#
+home
+configure system
+ ecpa-streams 4
+ stream-name "stream-4"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-5 Edit
+#
+home
+configure system
+ ecpa-streams 5
+ stream-name "stream-5"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-6 Edit
+#
+home
+configure system
+ ecpa-streams 6
+ stream-name "stream-6"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-7 Edit
+#
+home
+configure system
+ ecpa-streams 7
+ stream-name "stream-7"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-8 Edit
+#
+home
+configure system
+ ecpa-streams 8
+ stream-name "stream-8"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-9 Edit
+#
+home
+configure system
+ ecpa-streams 9
+ stream-name "stream-9"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-10 Edit
+#
+home
+configure system
+ ecpa-streams 10
+ stream-name "stream-10"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-11 Edit
+#
+home
+configure system
+ ecpa-streams 11
+ stream-name "stream-11"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-12 Edit
+#
+home
+configure system
+ ecpa-streams 12
+ stream-name "stream-12"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONTROL-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ ecpa-ctrl
+ src-port network-1-1-1-1
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 0
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:ECPA CONTROL-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ ecpa-ctrl
+ src-port access-1-1-2-1
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 1
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:DCN-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure dcn dcn-1-1-1-1
+ admin-state in-service
+ speed auto
+ alias ""
+ mdix auto
+#
+#CLI:SYNC-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure sync sync-1-1-1-1
+ admin-state in-service
+ network-clock-type option1-sdh
+ selection-mode prio-mode
+ wtr-time 5
+ sync-alias ""
+#
+#CLI:BITS IN-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure bits-in bits_in-1-1-1-1
+ admin-state unassigned
+ bits-line-type e1
+ alias ""
+ line-code e1-hdb3
+ frame-format e1-crc4
+ sa-bit bit4
+ ql-mode disabled
+ back
+ configure bits-in bits_in-1-1-1-1
+ assumed-ql ql-eec1
+ expected-ql ql-none
+#
+#CLI:BITS OUT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure bits-out bits_out-1-1-1-1
+ admin-state unassigned
+ bits-line-type e1
+ freq-source none
+ alias ""
+ squelch-ql ql-none
+ line-build-out none
+ line-code e1-hdb3
+ frame-format e1-crc4
+ sa-bit bit4
+ ql-mode disabled
+#
+#CLI:ACCESS PORT-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ admin-state in-service
+ service-type evpl
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure access-port access-1-1-2-1
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 500-*
+ outer-vlan2 601-*
+ outer-vlan3 4094-2
+ outer-vlan1-control enabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ back
+ configure access-port access-1-1-2-1
+ alias "Link to Customer [NO-MONITOR]"
+ auto-diagnostic disabled
+ mtu 9600
+ phy-type lan
+ wdmchannel not-tunable
+ afp all-afp
+ pcp-mode none
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ low-latency-queuing disabled
+ port-vlan-id 1-0
+ prio-map-mode 802.1p
+ n2a-vlan-trunking enabled
+ a2n-push-port-vid enabled
+ n2a-pop-port-vid disabled
+ a2n-swap-priority-vid disabled
+ n2a-swap-priority-vid disabled
+ swap-priority-vid 1
+home
+configure ptp
+ network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ delay-asymmetry 0
+ back
+ configure access-port access-1-1-2-1
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+ back
+ back
+ configure access-port access-1-1-2-1
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada sada
+ back
+ back
+ configure access-port access-1-1-2-1
+ cpd-filter cisco-group pass-thru
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bridge-group pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter bridge-reserved pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter garp-group pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter lldp pass-thru
+ back
+ configure access-port access-1-1-2-1
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ admin-state in-service
+ media fiber fixed-10g-full
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure network-port network-1-1-1-1
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 500-*
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ outer-vlan1-control enabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ alias "Link to OneNet"
+ auto-diagnostic disabled
+ mtu 9612
+ phy-type lan
+ wdmchannel not-tunable
+ pcp-mode none
+ low-latency-queuing disabled
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ fec
+ otu-tim-detect
+ otu-tim-ais-insert disabled
+ otu-trace-sapi-expected ""
+ otu-trace-sapi-tx ""
+ otu-trace-dapi-tx ""
+ otu-trace-opsp-tx ""
+ odu-tim-detect
+ odu-tim-ais-insert disabled
+ odu-trace-sapi-expected ""
+ odu-trace-sapi-tx ""
+ odu-trace-dapi-tx ""
+ odu-trace-opsp-tx ""
+ back
+ configure network-port network-1-1-1-1
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada sada
+ back
+ back
+ configure network-port network-1-1-1-1
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+home
+configure ptp
+ network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ delay-asymmetry 0
+ back
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-0 0 0
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-1 1 1
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-2 2 2
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-3 3 3
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-4 4 4
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-5 5 5
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-6 6 6
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-7 7 7
+ back
+ configure network-port network-1-1-1-1
+ cpd-filter cisco-group pass-thru
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bridge-group pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter bridge-reserved pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter garp-group pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter lldp pass-thru
+ back
+ configure network-port network-1-1-1-1
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold psc 0 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold ber-bc 1.56e-8 1day
+ set-threshold fec-es 1000 1day
+ set-threshold fec-ses 40 1day
+ set-threshold fec-ce 100000 1day
+ set-threshold fec-ube 10000 1day
+ set-threshold otu-es 1000 1day
+ set-threshold otu-ses 40 1day
+ set-threshold otu-bbe 10000 1day
+ set-threshold otu-uas 40 1day
+ set-threshold odu-es 1000 1day
+ set-threshold odu-ses 40 1day
+ set-threshold odu-bbe 10000 1day
+ set-threshold odu-uas 40 1day
+ set-threshold pcs-es 0 1day
+ set-threshold pcs-cv 0 1day
+ set-threshold pcs-she 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ media fiber fixed-10g-full
+ sync-e-mode disabled
+ ql-mode disabled
+ back
+ configure network-port network-1-1-1-2
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 4094-0
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ back
+ back
+ configure network-port network-1-1-1-2
+ alias ""
+ auto-diagnostic disabled
+ phy-type lan
+ wdmchannel not-tunable
+ low-latency-queuing disabled
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ fec
+ otu-tim-detect
+ otu-tim-ais-insert disabled
+ otu-trace-sapi-expected ""
+ otu-trace-sapi-tx ""
+ otu-trace-dapi-tx ""
+ otu-trace-opsp-tx ""
+ odu-tim-detect
+ odu-tim-ais-insert disabled
+ odu-trace-sapi-expected ""
+ odu-trace-sapi-tx ""
+ odu-trace-dapi-tx ""
+ odu-trace-opsp-tx ""
+ back
+ configure network-port network-1-1-1-2
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+home
+configure ptp
+ network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ delay-asymmetry 0
+ back
+ back
+ configure network-port network-1-1-1-2
+ cpd-filter cisco-group pass-thru
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bridge-group pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter bridge-reserved pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter garp-group pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter lldp pass-thru
+ back
+ configure network-port network-1-1-1-2
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold psc 0 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold ber-bc 1.56e-8 1day
+ set-threshold fec-es 1000 1day
+ set-threshold fec-ses 40 1day
+ set-threshold fec-ce 100000 1day
+ set-threshold fec-ube 10000 1day
+ set-threshold otu-es 1000 1day
+ set-threshold otu-ses 40 1day
+ set-threshold otu-bbe 10000 1day
+ set-threshold otu-uas 40 1day
+ set-threshold odu-es 1000 1day
+ set-threshold odu-ses 40 1day
+ set-threshold odu-bbe 10000 1day
+ set-threshold odu-uas 40 1day
+ set-threshold pcs-es 0 1day
+ set-threshold pcs-cv 0 1day
+ set-threshold pcs-she 0 1day
+#
+#CLI:ELMI ACCESS-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ENV ALARM INPUT-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-1
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-2
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-3
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-4
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:MANAGEMENT TUNNEL-1 Create
+#
+home
+configure communication
+ add mgmttunnel 1 "LTP" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
+ configure mgmttnl mgmt_tnl-1
+ buffer-size 32
+ cos 7
+ rip2Pkts-control disabled
+ ip-mode ipv4-only
+#
+#CLI:IP SOURCE ADDR CONFIG Edit
+#
+home
+configure communication
+ configure src-addr out-ip-intf-addr "eth0"
+#
+#CLI:IP SYSTEM Edit
+#
+home
+configure communication
+ configure eth0 ip-mode ipv4-only
+ configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+ configure eth0 dhcp-role dhcp-client
+ configure eth0 rip2Pkts-control disabled
+ configure eth0 dhcp-ntp-server-control disabled
+ configure eth0 dhcp-log-server-control disabled
+ configure eth0 dhcp-class-id-control enabled
+#
+#CLI:FLOW-1-1-2-1-1 Create
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ add flow flow-1-1-2-1-1 "" regular-evc disabled disabled disabled disabled 0 disabled none none "500-*,501-*,701-*,800-*,912-*" 0 10000000000 access-interface access-1-1-2-1 network-interface network-1-1-1-1
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ policing enabled
+ policing-control a2n-n2a
+ stag none
+ net-to-acc-rate-limiting disabled
+ default-cos 0
+ ctag none
+ untagged-traffic disabled
+ outertag-prio-ctrl disabled
+ innertag-prio-ctrl disabled
+ n2a-outertag-prio-ctrl disabled
+ access-learning-ctrl none
+ access-max-forwarding-entries 16384
+ protect-access-learning none
+ network-learning-ctrl none
+ network-max-forwarding-entries 16384
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ back
+ configure flow flow-1-1-2-1-1
+ cpd-filter cisco-group pass-thru
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bridge-group pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam pass-thru
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter bridge-reserved pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter garp-group pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter lldp pass-thru
+ back
+ configure flow flow-1-1-2-1-1
+ pm
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold es 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold learntblentrydiscards 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 128
+ back
+ back
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+ set-threshold br 0 1day
+ set-threshold fr 0 1day
+ set-threshold abrrlr 0 1day
+#
+#CLI:A2N POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ color-marking enabled
+ color-mode color-aware
+ coupling-flag enabled
+ cbs 0
+ cir 0
+ ebs 1024
+ eir 10000000000
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure n2a-policer n2a_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 128
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ efm-oam
+ oam-local-mode oam-active
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ efm-oam
+ oam-local-mode oam-active
+#
+#CLI:CFM CNTRL-1 Edit
+#
+home
+configure cfm
+ signal-fail-defect-list rdi,rem-ccm
+#
+#CLI:CFM SYSDEF MDLVL-1 Edit
+#
+home
+configure cfm
+ configure sysdef-md
+ md-level 0
+ mhf none
+#
+#CLI:PORT N2A SHAPER-1-1-2-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ buffersize 10
+ back
+ back
+ configure access-port access-1-1-2-1
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:MANAGEMENT TUNNEL-1 Edit
+#
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ dhcpv4-control disabled 10.199.192.2 255.255.255.252
+#
+#CLI:MANAGEMENT TUNNEL-1 Create
+#
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ sys-def-gateway 10.199.192.1
+#
+#CLI:LLDP SYS Edit
+#
+home
+configure system
+ lldp
+ trans-interval 30
+ holdtime-multiplier 4
+ reinit-delay 2
+ notification-interval 30
+ tx-credit-max 5
+ message-fast-tx 1
+ tx-fast-init 4
+ max-neighbor-action discard-new
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-2-1-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-2-1-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-1-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-2-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:SAT CONTROL-1-1 Edit
+#
+home
+configure sat
+ network-element ne-1
+ configure sat-ctrl sat_control-1-1
+ name "Sat Control"
+ test-mode two-way
+ test-procedure cir,eir,policing,performance
+ test-duration 20
+ step-duration 20
+ step-num 1
+ perf-test-duration 15
+#end
+home
+admin config-file
+# NetworkElement
+# ADVA-NE-1--> show slot-info 1
+# Slot Type : generic-slot
+# Card Type : ntexg210
+# Physical Entity Name : FSP150CC-XG210
+# MAC Address : 00:80:ea:68:20:00
+# Software Revision : 6.5.1-216
+# Firmware Revision : 75056:69403:72104:71367:2.1:5
+# Hardware Revision : 1.05
+# USI : LBADVA71152302799
+# CLEI Code : PENDING
+# Part Number : 1078904401-01
+# Manufacturer Date : 2015-06-09
+# Manufacturer Site : Shenzhen
More information about the Nocrancid
mailing list