[Nocrancid] autopop-onenet.net/buffalo-valley-ps-ge112.nid.onenet.net[0] router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Thu Oct 8 10:51:11 CDT 2015
Index: configs/buffalo-valley-ps-ge112.nid.onenet.net
===================================================================
--- configs/buffalo-valley-ps-ge112.nid.onenet.net (revision 129734)
+++ configs/buffalo-valley-ps-ge112.nid.onenet.net (working copy)
@@ -29,15 +29,27 @@
https enabled
telnet disabled
scp enabled
- ftp disabled
sftp enabled
security-banner "This is a private system. Unauthorized access or use may lead to prosecution."
security-prompt disabled
ssh enabled
snmp-engine-id "800009f0030080ea68c3f0"
+ utc-leap-offset disabled
+ time-zone
+ dst-control enabled
+ utc-offset "-06:00"
+ dst-utc-offset "+01:00"
+ dst-start-month march
+ dst-end-month november
+ dst-start-day "SUNDAY>=7"
+ dst-end-day "SUNDAY<=8"
+ dst-start-time "02:00"
+ dst-end-time "02:00"
+ back
+ ftp disabled
ntp-client
primary-server ipv4 164.58.3.98
- backup-server ipv4 164.58.29.14
+ backup-server 164.58.29.14
control enabled
polling-interval 16
back
@@ -111,6 +123,8 @@
alarm-attributes access-port amp-no-peer sa mj
alarm-attributes access-port amp-prov-fail nsa mn
alarm-attributes access-port amp-config-fail sa cr
+ alarm-attributes access-port lpbk-active nsa na
+ alarm-attributes access-port lpbk-requested nsa na
alarm-attributes network-port forced nsa na
alarm-attributes network-port lockout nsa na
alarm-attributes network-port farend-duplex-unknown nsa mn
@@ -162,6 +176,8 @@
alarm-attributes network-port amp-no-peer sa mj
alarm-attributes network-port amp-prov-fail nsa mn
alarm-attributes network-port amp-config-fail sa cr
+ alarm-attributes network-port lpbk-active nsa na
+ alarm-attributes network-port lpbk-requested nsa na
alarm-attributes cfm-mep xcon-ccm sa mn
alarm-attributes cfm-mep err-ccm sa mn
alarm-attributes cfm-mep rem-ccm sa mn
@@ -174,6 +190,8 @@
alarm-attributes lag lnkdn sa cr
alarm-attributes lag link-control-protocol-fail sa cr
alarm-attributes lag link-control-protocol-loopback sa cr
+ alarm-attributes lag lpbk-active nsa na
+ alarm-attributes lag lpbk-requested nsa na
alarm-attributes shelf-nte112 overtemp nsa mn
alarm-attributes shelf-nte112 undertemp nsa mn
alarm-attributes nte112 ctneqpt nsa mn
@@ -296,22 +314,14 @@
timeout 3
retries 5
#
-#CLI:SAT SYSTEM-1 Edit
-#
-home
-configure sat
- network-element ne-1
- configure sat-system
- ether-type 0x9800
-#
#CLI:SAT SAC PROFILE-1 Edit
#
home
configure system
profile
configure sac-profile sat_sac_profile-1
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_1"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -321,8 +331,8 @@
configure system
profile
configure sac-profile sat_sac_profile-2
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_2"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -332,8 +342,8 @@
configure system
profile
configure sac-profile sat_sac_profile-3
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_3"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -343,8 +353,8 @@
configure system
profile
configure sac-profile sat_sac_profile-4
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_4"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -366,6 +376,12 @@
configure snmp
add community "public" readonly
#
+#CLI:SNMP TARGETPARAMS ENTRY Create
+#
+home
+configure snmp
+ add target-params "v2trap" snmpv2c snmpv2c "public" no-auth
+#
#CLI:NE-1 Edit
#
home
@@ -397,22 +413,6 @@
alias ""
mdix auto
#
-#CLI:NETWORK PORT-1-1-1-1 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure network-port network-1-1-1-1
- auto-diagnostic disabled
-#
-#CLI:NETWORK PORT-1-1-1-2 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure network-port network-1-1-1-2
- auto-diagnostic enabled
-#
#CLI:ACCESS PORT-1-1-1-3 Edit
#
home
@@ -437,18 +437,6 @@
oam-control disabled
oam-local-mode oam-active
back
- alias ""
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- rx-pause disabled
- tx-pause disabled
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
llf
llf-control disabled
llf-trigger-event none
@@ -458,6 +446,9 @@
remote-link-ids none
back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -468,7 +459,29 @@
jdsu-lpbk-control disabled
swap-sada none
back
- cpd-filter cisco-group pass-thru
+ alias ""
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -479,7 +492,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -487,40 +499,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -555,6 +597,14 @@
set-threshold l2ptfe 0 15min
set-threshold l2ptfd 0 15min
set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -588,6 +638,14 @@
set-threshold l2ptfe 0 1day
set-threshold l2ptfd 0 1day
set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
#
#CLI:ACCESS PORT-1-1-1-4 Edit
#
@@ -613,18 +671,6 @@
oam-control disabled
oam-local-mode oam-active
back
- alias "Link to Customer"
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- rx-pause disabled
- tx-pause disabled
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
llf
llf-control disabled
llf-trigger-event none
@@ -634,6 +680,9 @@
remote-link-ids none
back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -644,7 +693,29 @@
jdsu-lpbk-control disabled
swap-sada none
back
- cpd-filter cisco-group pass-thru
+ alias "Link to Customer"
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-4-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -655,7 +726,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -663,40 +733,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -731,6 +831,14 @@
set-threshold l2ptfe 0 15min
set-threshold l2ptfd 0 15min
set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -764,6 +872,14 @@
set-threshold l2ptfe 0 1day
set-threshold l2ptfd 0 1day
set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
@@ -772,6 +888,7 @@
configure nte nte112-1-1-1
configure network-port network-1-1-1-1
admin-state in-service
+ auto-diagnostic disabled
media fiber auto-1000-full
port-shaped-speed 0
port-shaping disabled
@@ -783,19 +900,23 @@
inner-vlan3-control disabled
outer-vlan3-control disabled
back
- alias "Link to OneNet"
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ alias "OneNet"
mtu 9612
qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -813,16 +934,13 @@
llf-delay 0
local-link-id 1
remote-link-ids none
- back
- edit-prio-map network_prio_map-1-1-1-1-0 0 0
- edit-prio-map network_prio_map-1-1-1-1-1 1 1
- edit-prio-map network_prio_map-1-1-1-1-2 2 2
- edit-prio-map network_prio_map-1-1-1-1-3 3 3
- edit-prio-map network_prio_map-1-1-1-1-4 4 4
- edit-prio-map network_prio_map-1-1-1-1-5 5 5
- edit-prio-map network_prio_map-1-1-1-1-6 6 6
- edit-prio-map network_prio_map-1-1-1-1-7 7 7
- cpd-filter cisco-group pass-thru
+#
+#CLI:NETWORK CPDV2-1-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -833,7 +951,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -841,39 +958,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -911,6 +1059,14 @@
set-threshold psc 0 15min
set-threshold temp 0 15min
set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold esbf 0 1day
@@ -947,6 +1103,14 @@
set-threshold psc 0 1day
set-threshold temp 0 1day
set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
#
#CLI:NETWORK PORT-1-1-1-2 Edit
#
@@ -967,19 +1131,24 @@
inner-vlan3-control disabled
outer-vlan3-control disabled
back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
alias ""
+ auto-diagnostic enabled
mtu 9612
qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -998,6 +1167,171 @@
local-link-id 2
remote-link-ids none
#
+#CLI:NETWORK CPDV2-1-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold psc 0 15min
+ set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold psc 0 1day
+ set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
#CLI:ECPA CONFIG-1 Edit
#
home
@@ -1336,21 +1670,24 @@
#
home
configure communication
- add mgmttnl 1 "LTP" ethernet vlan-based network-1-1-1-1 80 ipv4-only disabled 10.199.192.54 255.255.255.252 256000 768000
+ add mgmttunnel 1 "LTP" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
configure mgmttnl mgmt_tnl-1
- cvlan-control enabled
- svlan-control disabled
- svlan-id 4095
+ dhcp-control disabled 10.199.192.54 255.255.255.252
+ back
+ configure mgmttnl mgmt_tnl-1
buffer-size 32
cos 7
+ back
+ configure mgmttnl mgmt_tnl-1
rip2Pkts-control disabled
+ dhcp-client-id-control disabled
+ dhcp-class-id-control enabled
+ dhcp-host-name-control enabled
+ dhcp-log-server-control disabled
+ dhcp-ntp-server-control disabled
+ dhcp-client-id-type mac-addr
+ dhcp-host-name-type system-name
#
-#CLI:IP SOURCE ADDR CONFIG Edit
-#
-home
-configure communication
- configure src-addr out-ip-intf-addr "eth0"
-#
#CLI:IP SYSTEM Edit
#
home
@@ -1358,8 +1695,20 @@
configure eth0 ip-mode ipv4-only
configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
configure eth0 dhcp-role dhcp-client
+ configure eth0 dhcp-client-id-type mac-addr
+ configure eth0 dhcp-class-id-control enabled
+ configure eth0 dhcp-host-name-control enabled
+ configure eth0 dhcp-host-name-type system-name
+ configure eth0 dhcp-log-server-control disabled
+ configure eth0 dhcp-ntp-server-control disabled
configure eth0 rip2Pkts-control disabled
#
+#CLI:IP SOURCE ADDR CONFIG Edit
+#
+home
+configure communication
+ configure src-addr out-ip-intf-addr "eth0"
+#
#CLI:FLOW-1-1-1-3-1 Edit
#
home
@@ -1371,17 +1720,15 @@
circuit-name ""
es-frame-loss-threshold 1
ses-frame-loss-threshold-ratio 30
+ network-interface network-1-1-1-1 push 3-0 none
a2n-shaping-type flow-based
policing enabled
policing-control a2n-n2a
- stag none
net-to-acc-rate-limiting disabled
default-cos 0
- ctag push 3-0
+ priority-mapping-profile none
pbb-frames disabled
- network-interface network-1-1-1-1
n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1392,7 +1739,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1400,14 +1746,30 @@
cpd-filter efm-oam pass-thru
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -1418,7 +1780,6 @@
set-threshold bytesinn2a 0 15min
set-threshold bytesouta2n 0 15min
set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
set-threshold fmga2n 0 15min
set-threshold fmgn2a 0 15min
set-threshold fmrda2n 0 15min
@@ -1428,6 +1789,22 @@
set-threshold ftda2n 0 15min
set-threshold ses 0 15min
set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -1437,7 +1814,6 @@
set-threshold bytesinn2a 0 1day
set-threshold bytesouta2n 0 1day
set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
set-threshold fmga2n 0 1day
set-threshold fmgn2a 0 1day
set-threshold fmrda2n 0 1day
@@ -1447,15 +1823,49 @@
set-threshold ftda2n 0 1day
set-threshold ses 0 1day
set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
#
home
network-element ne-1
configure nte nte112-1-1-1
configure access-port access-1-1-1-3
- configure n2a-shaper port_n2a_shaper-1-1-1-3-0
- buffersize 10
+ configure flow flow-1-1-1-3-1
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
#
#CLI:A2N POLICER-1-1-1-3-1-0 Edit
#
@@ -1467,20 +1877,12 @@
configure a2n-policer a2n_policer-1-1-1-3-1-0
eir 0
ebs 0
+ cir 0
+ cbs 0
color-marking enabled
color-mode color-aware
coupling-flag enabled
- cbs 0
- cir 0
back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-3
- configure flow flow-1-1-1-3-1
configure a2n-policer a2n_policer-1-1-1-3-1-0
pm
set-threshold fmg 0 15min
@@ -1518,6 +1920,29 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
+#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
+ configure n2a-shaper port_n2a_shaper-1-1-1-3-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
#CLI:FLOW-1-1-1-4-1 Edit
#
home
@@ -1530,17 +1955,15 @@
circuit-name ""
es-frame-loss-threshold 1
ses-frame-loss-threshold-ratio 30
+ network-interface network-1-1-1-1 push 500-0 none
a2n-shaping-type flow-based
policing enabled
policing-control a2n-n2a
- stag none
net-to-acc-rate-limiting disabled
default-cos 0
- ctag push 500-0
+ priority-mapping-profile none
pbb-frames disabled
- network-interface network-1-1-1-1
n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1551,7 +1974,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1559,14 +1981,30 @@
cpd-filter efm-oam pass-thru
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp pass-thru
+ cpd-filter non-tpmr-lldp pass-thru
+ cpd-filter customer-lldp pass-thru
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -1577,7 +2015,6 @@
set-threshold bytesinn2a 0 15min
set-threshold bytesouta2n 0 15min
set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
set-threshold fmga2n 0 15min
set-threshold fmgn2a 0 15min
set-threshold fmrda2n 0 15min
@@ -1587,6 +2024,22 @@
set-threshold ftda2n 0 15min
set-threshold ses 0 15min
set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -1596,7 +2049,6 @@
set-threshold bytesinn2a 0 1day
set-threshold bytesouta2n 0 1day
set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
set-threshold fmga2n 0 1day
set-threshold fmgn2a 0 1day
set-threshold fmrda2n 0 1day
@@ -1606,15 +2058,49 @@
set-threshold ftda2n 0 1day
set-threshold ses 0 1day
set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
+#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
#
home
network-element ne-1
configure nte nte112-1-1-1
configure access-port access-1-1-1-4
- configure n2a-shaper port_n2a_shaper-1-1-1-4-0
- buffersize 10
+ configure flow flow-1-1-1-4-1
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
#
#CLI:A2N POLICER-1-1-1-4-1-0 Edit
#
@@ -1626,20 +2112,12 @@
configure a2n-policer a2n_policer-1-1-1-4-1-0
ebs 1024
eir 100032000
+ cir 0
+ cbs 0
color-marking enabled
color-mode color-aware
coupling-flag enabled
- cbs 0
- cir 0
back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-4
- configure flow flow-1-1-1-4-1
configure a2n-policer a2n_policer-1-1-1-4-1-0
pm
set-threshold fmg 0 15min
@@ -1677,6 +2155,29 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
+#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ configure n2a-shaper port_n2a_shaper-1-1-1-4-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
@@ -1699,9 +2200,6 @@
#
home
configure cfm
- slm-multicast-mac 01:80:c2:00:00:30
- slm-op-code 53
- slr-op-code 52
signal-fail-defect-list rdi,rem-ccm
#
#CLI:CFM SYSDEF MDLVL-1 Edit
@@ -1712,84 +2210,6 @@
md-level 0
mhf none
#
-#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-3
- configure n2a-shaper port_n2a_shaper-1-1-1-3-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-4
- configure n2a-shaper port_n2a_shaper-1-1-1-4-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-3
- configure flow flow-1-1-1-3-1
- configure a2n-shaper a2n_shaper-1-1-1-3-1-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte112-1-1-1
- configure access-port access-1-1-1-4
- configure flow flow-1-1-1-4-1
- configure a2n-shaper a2n_shaper-1-1-1-4-1-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
#CLI:USB DCN-1-1-1-1 Edit
#
home
@@ -1801,12 +2221,6 @@
dial-number ""
redial-timer 10
#
-#CLI:IP SYSTEM Create
-#
-home
-configure communication
- add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.53 "LTP" 1 disabled
-#
#CLI:SYSTEM FEATURE-1 Edit
#
home
@@ -1887,12 +2301,26 @@
snmp-notification disabled
basic-tlv-supported port-description,sys-name,sys-description,sys-cap
#
-#CLI:SAT CONTROL-1-1 Create
+#CLI:SAT CONTROL-1-1 Edit
#
home
configure sat
network-element ne-1
- add sat-ctrl sat_control-1-1 "" one-way cir,eir,policing,performance 1 20 20 15
+ configure sat-ctrl sat_control-1-1
+ name ""
+ test-mode one-way
+ test-procedure cir,eir,policing,performance
+ test-duration 20
+ step-duration 20
+ step-num 1
+ perf-test-duration 15
+ flpdu-tag-override disabled
+#
+#CLI:IP SYSTEM Create
+#
+home
+configure communication
+ add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.53 "LTP" 1 disabled
#end
home
admin config-file
@@ -1902,11 +2330,11 @@
# Card Type : nte112
# Physical Entity Name : FSP150CC-GE112
# MAC Address : 00:80:ea:68:c3:f0
-# Software Revision : 6.3.1-106
-# Firmware Revision : 72957
+# Software Revision : 7.1.1-400
+# Firmware Revision : 81127l
# Hardware Revision : 1.01
# USI : LBADVA71152000857
# CLEI Code : Pending
# Part Number : 1078904600-01
-# Manufacturer Date : 2015-05-16
+# Manufacturer Date : 2015-05-15
# Manufacturer Site : Shenzhen
More information about the Nocrancid
mailing list