[Nocrancid] autopop-onenet.net router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Wed Aug 17 22:03:53 CDT 2016
Index: router.db
===================================================================
--- router.db (revision 145667)
+++ router.db (working copy)
@@ -245,6 +245,7 @@
dps-adva.p.onenet.net:fsp3000:up
dps-okc-mlk-ge114.nid.onenet.net:fsp150:up
dps-troop-c-muskogee.nid.onenet.net:fsp150:up
+dps-troop-f-ardmore.nid.onenet.net:fsp150:up
dps-tulsa-911.nid.onenet.net:fsp150:up
DRUMRIGHT-LIBRARY.client.onenet.net:juniper:up
dun-adva.p.onenet.net:fsp3000:up
@@ -573,6 +574,7 @@
san-sw-lawton.onenet.net:juniper:down
say-adva.p.onenet.net:fsp3000:up
sem-adva.p.onenet.net:fsp3000:up
+sepls-mcalester-pl.client.onenet.net:juniper:up
silo-ps.client.onenet.net:juniper:up
smithville-ps.client.onenet.net:juniper:up
spiro-ps.client.onenet.net:juniper:up
Index: routers.up
===================================================================
--- routers.up (revision 145651)
+++ routers.up (working copy)
@@ -226,6 +226,7 @@
dps-adva.p.onenet.net:fsp3000
dps-okc-mlk-ge114.nid.onenet.net:fsp150
dps-troop-c-muskogee.nid.onenet.net:fsp150
+dps-troop-f-ardmore.nid.onenet.net:fsp150
dps-tulsa-911.nid.onenet.net:fsp150
drumright-library.client.onenet.net:juniper
dun-adva.p.onenet.net:fsp3000
@@ -483,6 +484,7 @@
rpswi2.rp3f2.onenet.net:cisco
say-adva.p.onenet.net:fsp3000
sem-adva.p.onenet.net:fsp3000
+sepls-mcalester-pl.client.onenet.net:juniper
silo-ps.client.onenet.net:juniper
smithville-ps.client.onenet.net:juniper
spiro-ps.client.onenet.net:juniper
Index: configs/dps-troop-f-ardmore.nid.onenet.net
===================================================================
--- configs/dps-troop-f-ardmore.nid.onenet.net (revision 145668)
+++ configs/dps-troop-f-ardmore.nid.onenet.net (working copy)
@@ -0,0 +1,3543 @@
+# RANCID-CONTENT-TYPE: fsp150
+#
+# ADVA--> show running-config current
+Preparing configuration file...
+#
+#CLI:SUBNETWORK Edit
+#
+home
+configure system
+ prompt "ADVA"
+#
+#CLI:MANAGEMENT TUNNEL-1 Delete
+#
+home
+configure communication
+ delete mgmttnl mgmt_tnl-1
+#
+#CLI:SYSTEM Edit
+#
+home
+configure system
+ ntp-server-method user-defined
+ log-server-method user-defined
+ data-export
+ data-export-enable none
+ username ""
+ path ""
+ server-ip ipv4 0.0.0.0
+ back
+ system-tod-type ntp
+ auth-traps disabled
+ serial enabled
+ serial-disconnect-logoff enabled
+ http enabled
+ https enabled
+ telnet disabled
+ scp enabled
+ sftp enabled
+ security-banner "WARNING: UNAUTHORIZED USE IS STRICTLY PROHIBITED\\n\\nTo protect the system from unauthorized use,\\nactivities on this system are monitored,recorded and subject to audit.\\nUse of this system is expressed consent to such monitoring and recording.\\nAny unauthorized access or use of this system is prohibited and\\nis subject to criminal and civil penalties and/or administrative action."
+ security-prompt disabled
+ ssh enabled
+ snmp-engine-id "800009f0030080ea6dc2f0"
+ utc-leap-offset disabled
+ long-if-alias disabled
+ time-zone
+ dst-control enabled
+ utc-offset "-06:00"
+ dst-offset "+01:00"
+ dst-start-month march
+ dst-end-month november
+ dst-start-day "SUNDAY>=7"
+ dst-end-day "SUNDAY<=8"
+ dst-start-time "02:00"
+ dst-end-time "02:00"
+ back
+ ftp disabled
+ ntp-client
+ primary-server ipv4 164.58.3.98
+ backup-server 164.58.29.14
+ control enabled
+ polling-interval 16
+ back
+ proxy-arp disabled
+ mgmt-traffic-bridge disabled
+ mgmt-traffic-bridge-security disabled
+ mgmt-traffic-dscp-control disabled
+ mgmt-traffic-dscp-value 0
+ proxy-ndp disabled
+ ipv6-fwd disabled
+ alarm-attributes system prim-ntp-svr-fail nsa mn
+ alarm-attributes system bkup-ntp-svr-fail nsa mn
+ alarm-attributes system swdl-filetransfer-ip nsa nr
+ alarm-attributes system swdl-install-ip nsa nr
+ alarm-attributes system swdl-activation-ip nsa nr
+ alarm-attributes system swdl-validation-ip nsa nr
+ alarm-attributes system db-filetransfer-ip nsa nr
+ alarm-attributes system snmp-dg-host-unreachable nsa mn
+ alarm-attributes system snmp-dg-res-busy nsa mn
+ alarm-attributes system ip-address-conflict sa cr
+ alarm-attributes system db-downgrade nsa nr
+ alarm-attributes system filetransfer-ip nsa nr
+ alarm-attributes system operation-ip nsa nr
+ alarm-attributes system ltp-fail sa mj
+ alarm-attributes system ltp-in-progress nsa na
+ alarm-attributes system ipv6-address-conflict sa cr
+ alarm-attributes system dataexport-ftp-fail nsa mn
+ alarm-attributes system traffic-arp-table-full nsa mn
+ alarm-attributes access-port farend-duplex-unknown nsa mn
+ alarm-attributes access-port farend-duplex-unknown sa mj
+ alarm-attributes access-port efm-oam-dying-gasp nsa mn
+ alarm-attributes access-port efm-oam-dying-gasp sa cr
+ alarm-attributes access-port efm-fail nsa mn
+ alarm-attributes access-port efm-fail sa mn
+ alarm-attributes access-port efm-rce nsa mn
+ alarm-attributes access-port efm-rce sa mn
+ alarm-attributes access-port efm-rld nsa mn
+ alarm-attributes access-port efm-rld sa mn
+ alarm-attributes access-port efm-rls nsa mn
+ alarm-attributes access-port efm-rls sa mn
+ alarm-attributes access-port lnkdn-deact nsa mn
+ alarm-attributes access-port lnkdn-deact sa cr
+ alarm-attributes access-port lnkdn-unisolated nsa mn
+ alarm-attributes access-port lnkdn-unisolated sa cr
+ alarm-attributes access-port lnkdn-cbl-flt nsa mn
+ alarm-attributes access-port lnkdn-cbl-flt sa cr
+ alarm-attributes access-port lnkdn-cbl-rmvd nsa mn
+ alarm-attributes access-port lnkdn-cbl-rmvd sa cr
+ alarm-attributes access-port lnkdn-autoneg-failed nsa mn
+ alarm-attributes access-port lnkdn-autoneg-failed sa cr
+ alarm-attributes access-port lnkdn nsa mn
+ alarm-attributes access-port lnkdn sa cr
+ alarm-attributes access-port rfi nsa mn
+ alarm-attributes access-port rfi sa mn
+ alarm-attributes access-port rx-jabber nsa mn
+ alarm-attributes access-port rx-jabber sa mj
+ alarm-attributes access-port sfp-mismatch nsa mn
+ alarm-attributes access-port sfp-mismatch sa cr
+ alarm-attributes access-port sfp-rmvd nsa mn
+ alarm-attributes access-port sfp-rmvd sa cr
+ alarm-attributes access-port sfp-tx-flt nsa mn
+ alarm-attributes access-port sfp-tx-flt sa cr
+ alarm-attributes access-port rmt-efm-lpbk-fail nsa na
+ alarm-attributes access-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes access-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes access-port bw-exceeds-neg-speed sa mj
+ alarm-attributes access-port sfp-non-qualified nsa nr
+ alarm-attributes access-port lnkdn-master-slave-cfg nsa mn
+ alarm-attributes access-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes access-port link-control-protocol-fail nsa mn
+ alarm-attributes access-port link-control-protocol-fail sa cr
+ alarm-attributes access-port link-control-protocol-loopback nsa mn
+ alarm-attributes access-port link-control-protocol-loopback sa cr
+ alarm-attributes access-port test-alarm nsa mj
+ alarm-attributes access-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes access-port elmi-not-oper nsa mn
+ alarm-attributes access-port amp-no-peer sa mj
+ alarm-attributes access-port amp-prov-fail nsa mn
+ alarm-attributes access-port amp-config-fail sa cr
+ alarm-attributes access-port lpbk-active nsa na
+ alarm-attributes access-port lpbk-requested nsa na
+ alarm-attributes network-port forced nsa na
+ alarm-attributes network-port lockout nsa na
+ alarm-attributes network-port farend-duplex-unknown nsa mn
+ alarm-attributes network-port farend-duplex-unknown sa mj
+ alarm-attributes network-port efm-oam-dying-gasp nsa mn
+ alarm-attributes network-port efm-oam-dying-gasp sa cr
+ alarm-attributes network-port efm-fail nsa mn
+ alarm-attributes network-port efm-fail sa mn
+ alarm-attributes network-port efm-rce nsa mn
+ alarm-attributes network-port efm-rce sa mn
+ alarm-attributes network-port efm-rld nsa mn
+ alarm-attributes network-port efm-rld sa mn
+ alarm-attributes network-port efm-rls nsa mn
+ alarm-attributes network-port efm-rls sa mn
+ alarm-attributes network-port lnkdn-deact nsa mn
+ alarm-attributes network-port lnkdn-deact sa cr
+ alarm-attributes network-port lnkdn-unisolated nsa mn
+ alarm-attributes network-port lnkdn-unisolated sa cr
+ alarm-attributes network-port lnkdn-cbl-flt nsa mn
+ alarm-attributes network-port lnkdn-cbl-flt sa cr
+ alarm-attributes network-port lnkdn-cbl-rmvd nsa mn
+ alarm-attributes network-port lnkdn-cbl-rmvd sa cr
+ alarm-attributes network-port lnkdn-autoneg-failed nsa mn
+ alarm-attributes network-port lnkdn-autoneg-failed sa cr
+ alarm-attributes network-port lnkdn nsa mn
+ alarm-attributes network-port lnkdn sa cr
+ alarm-attributes network-port rfi nsa mn
+ alarm-attributes network-port rfi sa mn
+ alarm-attributes network-port rx-jabber nsa mn
+ alarm-attributes network-port rx-jabber sa mj
+ alarm-attributes network-port sfp-mismatch nsa mn
+ alarm-attributes network-port sfp-mismatch sa cr
+ alarm-attributes network-port sfp-rmvd nsa mn
+ alarm-attributes network-port sfp-rmvd sa cr
+ alarm-attributes network-port sfp-tx-flt nsa mn
+ alarm-attributes network-port sfp-tx-flt sa cr
+ alarm-attributes network-port rmt-efm-lpbk-fail nsa na
+ alarm-attributes network-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes network-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes network-port bw-exceeds-neg-speed sa mj
+ alarm-attributes network-port sfp-non-qualified nsa nr
+ alarm-attributes network-port lnkdn-master-slave-cfg nsa mn
+ alarm-attributes network-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes network-port link-control-protocol-fail nsa mn
+ alarm-attributes network-port link-control-protocol-fail sa cr
+ alarm-attributes network-port link-control-protocol-loopback nsa mn
+ alarm-attributes network-port link-control-protocol-loopback sa cr
+ alarm-attributes network-port test-alarm nsa mj
+ alarm-attributes network-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes network-port elmi-not-oper nsa mn
+ alarm-attributes network-port amp-no-peer sa mj
+ alarm-attributes network-port amp-prov-fail nsa mn
+ alarm-attributes network-port amp-config-fail sa cr
+ alarm-attributes network-port lpbk-active nsa na
+ alarm-attributes network-port lpbk-requested nsa na
+ alarm-attributes cfm-mep xcon-ccm sa mn
+ alarm-attributes cfm-mep err-ccm sa mn
+ alarm-attributes cfm-mep rem-ccm sa mn
+ alarm-attributes cfm-mep mac-status sa mn
+ alarm-attributes cfm-mep rdi sa mn
+ alarm-attributes cfm-mep ais sa nr
+ alarm-attributes cfm-qos-shaper shaper-btd nsa na
+ alarm-attributes dcn-port lnkdn sa na
+ alarm-attributes lag lnkdn-deact sa cr
+ alarm-attributes lag lnkdn sa cr
+ alarm-attributes lag link-control-protocol-fail sa cr
+ alarm-attributes lag link-control-protocol-loopback sa cr
+ alarm-attributes lag amp-no-peer sa mj
+ alarm-attributes lag amp-prov-fail nsa mn
+ alarm-attributes lag amp-config-fail sa cr
+ alarm-attributes lag lpbk-active nsa na
+ alarm-attributes lag lpbk-requested nsa na
+ alarm-attributes shelf-nte114 overtemp nsa mn
+ alarm-attributes shelf-nte114 undertemp nsa mn
+ alarm-attributes nte114 ctneqpt nsa mn
+ alarm-attributes nte114 eqpt-flt sa cr
+ alarm-attributes nte114 mismatch sa cr
+ alarm-attributes nte114 eqpt-rmvd sa cr
+ alarm-attributes nte114 test-alarm nsa mj
+ alarm-attributes mobile-modem lnkdn nsa na
+ alarm-attributes mobile-modem usbdevicemea nsa na
+ alarm-attributes mobile-modem usbdevicenonqualified nsa na
+ alarm-attributes mobile-modem usbdeviceremoved nsa na
+ alarm-attributes mobile-modem no-sim-card nsa na
+ alarm-attributes erp-group erp-fop-mismatch sa mj
+ alarm-attributes erp-group erp-fop-timeout nsa mn
+ alarm-attributes erp-group erp-blockport0-rpl nsa nr
+ alarm-attributes erp-group erp-blockport0-sf nsa na
+ alarm-attributes erp-group erp-blockport0-ms nsa na
+ alarm-attributes erp-group erp-blockport0-fs nsa na
+ alarm-attributes erp-group erp-blockport0-wtr nsa na
+ alarm-attributes erp-group erp-blockport1-rpl nsa nr
+ alarm-attributes erp-group erp-blockport1-sf nsa na
+ alarm-attributes erp-group erp-blockport1-ms nsa na
+ alarm-attributes erp-group erp-blockport1-fs nsa na
+ alarm-attributes erp-group erp-blockport1-wtr nsa na
+ alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+ alarm-attributes wifi-dongle usbdevicemea nsa na
+ alarm-attributes wifi-dongle usbdevicenonqualified nsa na
+ alarm-attributes wifi-dongle usbdeviceremoved nsa na
+ syslog-server 1
+ configure ip-version ipv4
+ configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+ back
+ syslog-server 2
+ configure ip-version ipv4
+ configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+ back
+ syslog-server 3
+ configure ip-version ipv4
+ configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+ back
+ audit-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ security-log
+ syslog-control disabled
+ back
+ alarm-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ acl-entry acl-1
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-2
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-3
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-4
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-5
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-6
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-7
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-8
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-9
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-10
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-11
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-12
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-13
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-14
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-15
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-16
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-17
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-18
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-19
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-20
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-21
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-22
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-23
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-24
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-25
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+#
+#CLI:SECURITY SYSTEM Edit
+#
+home
+configure user-security
+ access-order local
+ auth-protocol radius
+ auth-type pap
+ nas-ip-address 10.199.193.10
+ nas-ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ security-strength high
+ accounting disabled
+ config-ssl-strength low
+ tacacs-privilege-control enabled
+ security-trap-type disabled
+ config-rap 1
+ ip-version ipv4
+ ip-address 156.110.31.11
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order first
+ timeout 3
+ retries 5
+ control enabled
+ back
+ config-rap 2
+ ip-version ipv4
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order second
+ timeout 3
+ retries 5
+ back
+ config-rap 3
+ ip-version ipv4
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order third
+ timeout 3
+ retries 5
+#
+#CLI:SNMP COMMUNITY ENTRY Delete
+#
+home
+configure snmp
+ delete community "private"
+#
+#CLI:SNMP COMMUNITY ENTRY Delete
+#
+home
+configure snmp
+ delete community "public"
+#
+#CLI:SAT SAC PROFILE-1 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-1
+ name "SAT_SAC_Profile_1"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-2 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-2
+ name "SAT_SAC_Profile_2"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-3 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-3
+ name "SAT_SAC_Profile_3"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-4 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-4
+ name "SAT_SAC_Profile_4"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "community" readonly
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "etn1net" readwrite
+#
+#CLI:NE-1 Edit
+#
+home
+network-element ne-1
+ prompt "NE-1"
+ name "DPS-TROOP-F-ARDMORE-GE114"
+ contact ""
+ location ""
+ pm-interval 15min
+ admin-state in-service
+#
+#CLI:NTE114-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ admin-state in-service
+ alias ""
+ snmp-dying-gasp disabled
+#
+#CLI:DCN-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure dcn
+ admin-state in-service
+ speed auto
+ alias ""
+ mdix auto
+#
+#CLI:ACCESS PORT-1-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ admin-state unassigned
+ service-type epl
+ speed auto
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix auto
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 3
+ remote-link-ids none
+ back
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ alias ""
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold aufd 0 15min
+ set-threshold apfd 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold l2ptfe 0 15min
+ set-threshold l2ptfd 0 15min
+ set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold l2ptfe 0 1day
+ set-threshold l2ptfd 0 1day
+ set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+#
+#CLI:ACCESS PORT-1-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ admin-state unassigned
+ service-type epl
+ speed auto
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix auto
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 4
+ remote-link-ids none
+ back
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ alias ""
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-4-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold aufd 0 15min
+ set-threshold apfd 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold l2ptfe 0 15min
+ set-threshold l2ptfd 0 15min
+ set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold l2ptfe 0 1day
+ set-threshold l2ptfd 0 1day
+ set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+#
+#CLI:ACCESS PORT-1-1-1-5 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ admin-state unassigned
+ service-type epl
+ speed auto
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix auto
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 5
+ remote-link-ids none
+ back
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ alias ""
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-5-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold aufd 0 15min
+ set-threshold apfd 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold l2ptfe 0 15min
+ set-threshold l2ptfd 0 15min
+ set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold l2ptfe 0 1day
+ set-threshold l2ptfd 0 1day
+ set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+#
+#CLI:ACCESS PORT-1-1-1-6 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ admin-state in-service
+ service-type epl
+ speed auto
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix auto
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 6
+ remote-link-ids none
+ back
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ alias "DPS-TROOP-F-ARDMORE-100M-CIR000XXXX"
+ auto-diagnostic enabled
+ mtu 9600
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ qinq-ethertype 0x0
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-6-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold aufd 0 15min
+ set-threshold apfd 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold l2ptfe 0 15min
+ set-threshold l2ptfd 0 15min
+ set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold l2ptfe 0 1day
+ set-threshold l2ptfd 0 1day
+ set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ admin-state in-service
+ auto-diagnostic disabled
+ media fiber auto-1000-full
+ port-shaped-speed 0
+ port-shaping disabled
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ alias ""
+ mtu 9612
+ qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+#
+#CLI:NETWORK CPDV2-1-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold lbc 0 15min
+ set-threshold opr -80 15min
+ set-threshold opr-variance 4 15min
+ set-threshold opt -80 15min
+ set-threshold opt-variance 4 15min
+ set-threshold psc 0 15min
+ set-threshold temp 0 15min
+ set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold psc 0 1day
+ set-threshold temp 0 1day
+ set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ admin-state unassigned
+ media copper auto
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix auto
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ alias ""
+ auto-diagnostic enabled
+ mtu 9612
+ qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
+ pcp-mode none
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 2
+ remote-link-ids none
+#
+#CLI:NETWORK CPDV2-1-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ pm
+ set-threshold abrrx 0 15min
+ set-threshold abrtx 0 15min
+ set-threshold esbf 0 15min
+ set-threshold esbp 0 15min
+ set-threshold esbs 0 15min
+ set-threshold esc 0 15min
+ set-threshold escae 37055 15min
+ set-threshold esde 37055 15min
+ set-threshold esf 37055 15min
+ set-threshold esfs 0 15min
+ set-threshold esj 0 15min
+ set-threshold esmf 0 15min
+ set-threshold esmp 0 15min
+ set-threshold eso 0 15min
+ set-threshold esof 0 15min
+ set-threshold esop 37055 15min
+ set-threshold esp 0 15min
+ set-threshold esp64 0 15min
+ set-threshold esp65 0 15min
+ set-threshold esp128 0 15min
+ set-threshold esp256 0 15min
+ set-threshold esp512 0 15min
+ set-threshold esp1024 0 15min
+ set-threshold esp1519 0 15min
+ set-threshold esuf 0 15min
+ set-threshold esup 37055 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold l2cpfp 0 15min
+ set-threshold psc 0 15min
+ set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold psc 0 1day
+ set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
+#CLI:ELMI ACCESS-1-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI ACCESS-1-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI ACCESS-1-1-1-5 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI ACCESS-1-1-1-6 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ECPA CONFIG-1 Edit
+#
+home
+configure system
+ ecpa-streams 1
+ stream-name "stream-1"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-2 Edit
+#
+home
+configure system
+ ecpa-streams 2
+ stream-name "stream-2"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-3 Edit
+#
+home
+configure system
+ ecpa-streams 3
+ stream-name "stream-3"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-4 Edit
+#
+home
+configure system
+ ecpa-streams 4
+ stream-name "stream-4"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-5 Edit
+#
+home
+configure system
+ ecpa-streams 5
+ stream-name "stream-5"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-6 Edit
+#
+home
+configure system
+ ecpa-streams 6
+ stream-name "stream-6"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-7 Edit
+#
+home
+configure system
+ ecpa-streams 7
+ stream-name "stream-7"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-8 Edit
+#
+home
+configure system
+ ecpa-streams 8
+ stream-name "stream-8"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-9 Edit
+#
+home
+configure system
+ ecpa-streams 9
+ stream-name "stream-9"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-10 Edit
+#
+home
+configure system
+ ecpa-streams 10
+ stream-name "stream-10"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-11 Edit
+#
+home
+configure system
+ ecpa-streams 11
+ stream-name "stream-11"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-12 Edit
+#
+home
+configure system
+ ecpa-streams 12
+ stream-name "stream-12"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ ip-precedence-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:TRAFFIC GEN-1 Edit
+#
+home
+network-element ne-1
+ configure tm-params bwp-mode line-rate
+#
+#CLI:ECPA CONTROL-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ ecpa-ctrl
+ src-port access-1-1-1-3
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 0
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:MANAGEMENT TUNNEL-1 Create
+#
+home
+configure communication
+ add mgmttunnel 1 "MGMT" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
+ configure mgmttnl mgmt_tnl-1
+ dhcp-control disabled 10.199.193.10 255.255.255.252
+ back
+ configure mgmttnl mgmt_tnl-1
+ buffer-size 32
+ cos 7
+ back
+ configure mgmttnl mgmt_tnl-1
+ rip2Pkts-control disabled
+ dhcp-client-id-control enabled
+ dhcp-class-id-control enabled
+ dhcp-host-name-control enabled
+ dhcp-log-server-control disabled
+ dhcp-ntp-server-control disabled
+ dhcp-client-id-type mac-addr
+ dhcp-host-name-type system-name
+#
+#CLI:IP SYSTEM Edit
+#
+home
+configure communication
+ configure eth0 ip-mode ipv4-only
+ configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+ configure eth0 dhcp-role dhcp-client
+ configure eth0 dhcp-client-id-type mac-addr
+ configure eth0 dhcp-class-id-control enabled
+ configure eth0 dhcp-host-name-control enabled
+ configure eth0 dhcp-host-name-type system-name
+ configure eth0 dhcp-log-server-control disabled
+ configure eth0 dhcp-ntp-server-control disabled
+ configure eth0 rip2Pkts-control disabled
+#
+#CLI:IP SOURCE ADDR CONFIG Edit
+#
+home
+configure communication
+ configure src-addr out-ip-intf-addr "eth0"
+#
+#CLI:FLOW-1-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ configure flow flow-1-1-1-3-1
+ itag none
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ access-interface access-1-1-1-3 network-interface network-1-1-1-1 push 3-0 none
+ a2n-shaping-type flow-based
+ policing enabled
+ policing-control a2n-n2a
+ net-to-acc-rate-limiting disabled
+ default-cos 0
+ priority-mapping-profile none
+ pbb-frames disabled
+ access-learning-ctrl none
+ network-learning-ctrl none
+ access-max-forwarding-entries 2048
+ network-max-forwarding-entries 2048
+ protect-access-learning none
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam pass-thru
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ pm
+ set-threshold abra2n 0 15min
+ set-threshold abrrla2n 0 15min
+ set-threshold abrn2a 0 15min
+ set-threshold abrrln2a 0 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold bytesina2n 0 15min
+ set-threshold bytesinn2a 0 15min
+ set-threshold bytesouta2n 0 15min
+ set-threshold bytesoutn2a 0 15min
+ set-threshold fmga2n 0 15min
+ set-threshold fmgn2a 0 15min
+ set-threshold fmrda2n 0 15min
+ set-threshold fmrdn2a 0 15min
+ set-threshold fmya2n 0 15min
+ set-threshold fmyn2a 0 15min
+ set-threshold ftda2n 0 15min
+ set-threshold ses 0 15min
+ set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ configure flow flow-1-1-1-3-1
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-3-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ configure flow flow-1-1-1-3-1
+ configure a2n-policer a2n_policer-1-1-1-3-1-0
+ eir 0
+ ebs 0
+ cir 0
+ cbs 0
+ color-marking enabled
+ color-mode color-aware
+ coupling-flag enabled
+ back
+ configure a2n-policer a2n_policer-1-1-1-3-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-3-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ configure flow flow-1-1-1-3-1
+ configure n2a-policer n2a_policer-1-1-1-3-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ configure n2a-shaper port_n2a_shaper-1-1-1-3-0
+ buffersize 0
+ soam-cir 0
+ soam-eir 0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:FLOW-1-1-1-4-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ configure flow flow-1-1-1-4-1
+ itag none
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ access-interface access-1-1-1-4 network-interface network-1-1-1-1 push 4-0 none
+ a2n-shaping-type flow-based
+ policing enabled
+ policing-control a2n-n2a
+ net-to-acc-rate-limiting disabled
+ default-cos 0
+ priority-mapping-profile none
+ pbb-frames disabled
+ access-learning-ctrl none
+ network-learning-ctrl none
+ access-max-forwarding-entries 2048
+ network-max-forwarding-entries 2048
+ protect-access-learning none
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam pass-thru
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ pm
+ set-threshold abra2n 0 15min
+ set-threshold abrrla2n 0 15min
+ set-threshold abrn2a 0 15min
+ set-threshold abrrln2a 0 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold bytesina2n 0 15min
+ set-threshold bytesinn2a 0 15min
+ set-threshold bytesouta2n 0 15min
+ set-threshold bytesoutn2a 0 15min
+ set-threshold fmga2n 0 15min
+ set-threshold fmgn2a 0 15min
+ set-threshold fmrda2n 0 15min
+ set-threshold fmrdn2a 0 15min
+ set-threshold fmya2n 0 15min
+ set-threshold fmyn2a 0 15min
+ set-threshold ftda2n 0 15min
+ set-threshold ses 0 15min
+ set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ configure flow flow-1-1-1-4-1
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-4-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ configure flow flow-1-1-1-4-1
+ configure a2n-policer a2n_policer-1-1-1-4-1-0
+ eir 0
+ ebs 0
+ cir 0
+ cbs 0
+ color-marking enabled
+ color-mode color-aware
+ coupling-flag enabled
+ back
+ configure a2n-policer a2n_policer-1-1-1-4-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-4-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ configure flow flow-1-1-1-4-1
+ configure n2a-policer n2a_policer-1-1-1-4-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ configure n2a-shaper port_n2a_shaper-1-1-1-4-0
+ buffersize 0
+ soam-cir 0
+ soam-eir 0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:FLOW-1-1-1-5-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ configure flow flow-1-1-1-5-1
+ itag none
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ access-interface access-1-1-1-5 network-interface network-1-1-1-1 push 5-0 none
+ a2n-shaping-type flow-based
+ policing enabled
+ policing-control a2n-n2a
+ net-to-acc-rate-limiting disabled
+ default-cos 0
+ priority-mapping-profile none
+ pbb-frames disabled
+ access-learning-ctrl none
+ network-learning-ctrl none
+ access-max-forwarding-entries 2048
+ network-max-forwarding-entries 2048
+ protect-access-learning none
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam pass-thru
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ pm
+ set-threshold abra2n 0 15min
+ set-threshold abrrla2n 0 15min
+ set-threshold abrn2a 0 15min
+ set-threshold abrrln2a 0 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold bytesina2n 0 15min
+ set-threshold bytesinn2a 0 15min
+ set-threshold bytesouta2n 0 15min
+ set-threshold bytesoutn2a 0 15min
+ set-threshold fmga2n 0 15min
+ set-threshold fmgn2a 0 15min
+ set-threshold fmrda2n 0 15min
+ set-threshold fmrdn2a 0 15min
+ set-threshold fmya2n 0 15min
+ set-threshold fmyn2a 0 15min
+ set-threshold ftda2n 0 15min
+ set-threshold ses 0 15min
+ set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-5-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ configure flow flow-1-1-1-5-1
+ configure a2n-shaper a2n_shaper-1-1-1-5-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-5-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-5-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-5-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ configure flow flow-1-1-1-5-1
+ configure a2n-policer a2n_policer-1-1-1-5-1-0
+ eir 0
+ ebs 0
+ cir 0
+ cbs 0
+ color-marking enabled
+ color-mode color-aware
+ coupling-flag enabled
+ back
+ configure a2n-policer a2n_policer-1-1-1-5-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-5-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ configure flow flow-1-1-1-5-1
+ configure n2a-policer n2a_policer-1-1-1-5-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-5-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ configure n2a-shaper port_n2a_shaper-1-1-1-5-0
+ buffersize 0
+ soam-cir 0
+ soam-eir 0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:FLOW-1-1-1-6-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ configure flow flow-1-1-1-6-1
+ admin-state in-service
+ itag none
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ access-interface access-1-1-1-6 network-interface network-1-1-1-1 push 500-0 none
+ a2n-shaping-type flow-based
+ policing enabled
+ policing-control a2n-n2a
+ net-to-acc-rate-limiting disabled
+ default-cos 0
+ priority-mapping-profile none
+ pbb-frames disabled
+ access-learning-ctrl none
+ network-learning-ctrl none
+ access-max-forwarding-entries 2048
+ network-max-forwarding-entries 2048
+ protect-access-learning none
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu pass-thru
+ cpd-filter pause pass-thru
+ cpd-filter lacp pass-thru
+ cpd-filter lacp-marker pass-thru
+ cpd-filter efm-oam pass-thru
+ cpd-filter ssm discard
+ cpd-filter port-authen pass-thru
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
+ pm
+ set-threshold abra2n 0 15min
+ set-threshold abrrla2n 0 15min
+ set-threshold abrn2a 0 15min
+ set-threshold abrrln2a 0 15min
+ set-threshold l2cpfd 0 15min
+ set-threshold bytesina2n 0 15min
+ set-threshold bytesinn2a 0 15min
+ set-threshold bytesouta2n 0 15min
+ set-threshold bytesoutn2a 0 15min
+ set-threshold fmga2n 0 15min
+ set-threshold fmgn2a 0 15min
+ set-threshold fmrda2n 0 15min
+ set-threshold fmrdn2a 0 15min
+ set-threshold fmya2n 0 15min
+ set-threshold fmyn2a 0 15min
+ set-threshold ftda2n 0 15min
+ set-threshold ses 0 15min
+ set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-6-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ configure flow flow-1-1-1-6-1
+ configure a2n-shaper a2n_shaper-1-1-1-6-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-6-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-6-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-6-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ configure flow flow-1-1-1-6-1
+ configure a2n-policer a2n_policer-1-1-1-6-1-0
+ ebs 1024
+ eir 100032000
+ cir 0
+ cbs 0
+ color-marking enabled
+ color-mode color-aware
+ coupling-flag enabled
+ back
+ configure a2n-policer a2n_policer-1-1-1-6-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-6-1-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ configure flow flow-1-1-1-6-1
+ configure n2a-policer n2a_policer-1-1-1-6-1-0
+ pm
+ set-threshold fmg 0 15min
+ set-threshold fmy 0 15min
+ set-threshold fmrd 0 15min
+ set-threshold abr 0 15min
+ set-threshold bytesin 0 15min
+ set-threshold bytesout 0 15min
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-6-0 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ configure n2a-shaper port_n2a_shaper-1-1-1-6-0
+ buffersize 10
+ soam-cir 0
+ soam-eir 0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ lpbk
+ rls-lpbk
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ lpbk
+ rls-lpbk
+#
+#CLI:CFM CNTRL Edit
+#
+home
+configure cfm
+ signal-fail-defect-list rdi,rem-ccm
+#
+#CLI:CFM SYSDEF MDLVL-1 Edit
+#
+home
+configure cfm
+ configure sysdef-md
+ md-level 0
+ mhf none
+#
+#CLI:MOBILE MODEM-1-1-1-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure usb
+ add mobile-modem
+ back
+ configure usb
+ configure mobile-modem
+ admin-state unassigned
+ alias ""
+ apn ""
+ dial-number ""
+ redial-timer 10
+#
+#CLI:SYSTEM FEATURE-1 Edit
+#
+home
+admin sw-license
+ configure feature "PBB" disabled
+#
+#CLI:LLDP SYS Edit
+#
+home
+configure system
+ lldp
+ trans-interval 30
+ holdtime-multiplier 4
+ reinit-delay 2
+ notification-interval 30
+ tx-credit-max 5
+ message-fast-tx 1
+ tx-fast-init 4
+ max-neighbor-action discard-new
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-3-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-3
+ lldp
+ add acc-port-config 1
+ back
+ lldp
+ configure acc-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-4-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-4
+ lldp
+ add acc-port-config 1
+ back
+ lldp
+ configure acc-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-5-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-5
+ lldp
+ add acc-port-config 1
+ back
+ lldp
+ configure acc-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-6-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure access-port access-1-1-1-6
+ lldp
+ add acc-port-config 1
+ back
+ lldp
+ configure acc-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-1
+ lldp
+ add net-port-config 1
+ back
+ lldp
+ configure net-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-1 Create
+#
+home
+network-element ne-1
+ configure nte nte114-1-1-1
+ configure network-port network-1-1-1-2
+ lldp
+ add net-port-config 1
+ back
+ lldp
+ configure net-port-config 1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:SAT CONTROL-1-1 Edit
+#
+home
+configure sat
+ network-element ne-1
+ configure sat-ctrl sat_control-1-1
+ name ""
+ test-mode one-way
+ test-procedure cir,eir,policing,performance
+ test-duration 20
+ step-duration 20
+ step-num 1
+ perf-test-duration 15
+ flpdu-tag-override disabled
+#
+#CLI:IP SYSTEM Create
+#
+home
+configure communication
+ add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.193.9 "MGMT" 1 disabled
+#end
+home
+admin config-file
+# NetworkElement
+# ADVA-NE-1--> show slot-info 1
+# Slot Type : generic-slot
+# Card Type : nte114
+# Physical Entity Name : FSP150CC-GE114
+# MAC Address : 00:80:ea:6d:c2:f0
+# Software Revision : 8.1.1-164
+# Firmware Revision : 87458l
+# Hardware Revision : 1.01
+# USI : LBADVA71152600197
+# CLEI Code : Pending
+# Part Number : 1078904620-01
+# Manufacturer Date : 2015-06-25
+# Manufacturer Site : Shenzhen
Index: configs/maysville-es.client.onenet.net
===================================================================
--- configs/maysville-es.client.onenet.net (revision 145667)
+++ configs/maysville-es.client.onenet.net (working copy)
@@ -614,7 +614,6 @@
# OSPF instance is not running
#
# grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show bfd session
-quit
0 sessions, 0 clients
Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/core.mca.onenet.net
===================================================================
--- configs/core.mca.onenet.net (revision 145664)
+++ configs/core.mca.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at MCALESTER-MX480-RE0> show system commit
+# 2016-08-17 21:44:08 CDT by andrew via cli commit synchronize
# 2016-08-16 23:23:25 CDT by andrew via cli commit synchronize
# 2016-08-16 23:08:00 CDT by andrew via cli commit synchronize
# 2016-08-16 18:23:12 CDT by andrew via cli commit synchronize
# 2016-08-16 18:20:31 CDT by andrew via cli commit synchronize
# 2016-07-27 10:45:57 CDT by admin via cli commit synchronize
-# 2016-07-26 14:18:13 CDT by aberrios via cli commit synchronize
# grnoc-mon at MCALESTER-MX480-RE0> show chassis environment
# Class Item Status Measurement
# Temp PEM 0 OK
@@ -255,7 +255,7 @@
# grnoc-mon at MCALESTER-MX480-RE0> show system uptime
# System booted: 2016-03-13 01:36 CST
# Protocols started: 2016-03-13 01:45 CST
-# Last configured: 2016-08-16 23:23 CDT by andrew
+# Last configured: 2016-08-17 21:44 CDT by andrew
#
# {master}
# grnoc-mon at MCALESTER-MX480-RE0> show interface terse
@@ -407,7 +407,7 @@
#pp0 up up
#tap up up
# grnoc-mon at MCALESTER-MX480-RE0> show configuration
-## Last commit: 2016-08-16 23:23:25 CDT by andrew
+## Last commit: 2016-08-17 21:44:08 CDT by andrew
version 13.3R8.7;
groups {
re0 {
@@ -725,11 +725,15 @@
}
}
unit 1033 {
- description SEPLS-MCALESTER-PUBLIC-LIBRARY-INTERNET-100M-CIR0005247;
+ description SEPLS-MCALESTER-PUBLIC-LIBRARY-INTERNET-1G-CIR0019520;
bandwidth 100m;
vlan-tags outer 1033 inner 200;
family inet {
mtu 1500;
+ policer {
+ input 1G-POL;
+ output 1G-POL;
+ }
sampling {
input;
}
@@ -754,11 +758,15 @@
}
}
unit 2033 {
- description SEPLS-MCALESTER-PUBLIC-LIBRARY-MPLS-CIR0005247;
+ description SEPLS-MCALESTER-PUBLIC-LIBRARY-MPLS-1G-CIR0019520;
bandwidth 100m;
vlan-tags outer 1033 inner 201;
family inet {
mtu 1500;
+ policer {
+ input 1G-POL;
+ output 1G-POL;
+ }
sampling {
input;
output;
Index: configs/oja-cojc-tecumseh-srx240.client.onenet.net
===================================================================
--- configs/oja-cojc-tecumseh-srx240.client.onenet.net (revision 145667)
+++ configs/oja-cojc-tecumseh-srx240.client.onenet.net (working copy)
@@ -160,7 +160,7 @@
#ppd0 up up
#ppe0 up up
#st0 up up
-#st0.1 up down
+#st0.1 up up
#tap up up
#vlan up up
#vlan.999 up down
Index: configs/leflore-ps.client.onenet.net
===================================================================
--- configs/leflore-ps.client.onenet.net (revision 145460)
+++ configs/leflore-ps.client.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at LEFLORE-PS-LR-004337> show system commit
+# 2016-08-17 21:50:04 CDT by andrew via cli
# 2016-08-04 08:57:41 CDT by sean via cli
# 2016-08-04 08:51:04 CDT by sean via cli commit confirmed, rollback in 3mins
# 2016-05-27 16:42:53 CDT by sky via cli
# 2015-10-06 17:01:07 CDT by admin via cli
# 2015-10-06 16:49:02 CDT by onenet via cli commit confirmed, rollback in 3mins
-# 2014-10-08 17:46:31 CDT by root via cli
# grnoc-mon at LEFLORE-PS-LR-004337> show chassis environment
# Class Item Status Measurement
# Temp Routing Engine OK
@@ -97,7 +97,7 @@
# grnoc-mon at LEFLORE-PS-LR-004337> show system uptime
# System booted: 2016-08-10 15:24 CDT
# Protocols started: 2016-08-10 15:26 CDT
-# Last configured: 2016-08-04 08:57 CDT by sean
+# Last configured: 2016-08-17 21:50 CDT by andrew
#
# grnoc-mon at LEFLORE-PS-LR-004337> show interface terse
#Interface Admin Link
@@ -111,8 +111,7 @@
#sp-0/0/0 up up
#sp-0/0/0.0 up up
#sp-0/0/0.16383 up up
-#ge-0/0/1 up down
-#ge-0/0/1.0 up down
+#ge-0/0/1 down down
#ge-0/0/2 down down
#ge-0/0/3 down down
#ge-0/0/4 down down
@@ -144,7 +143,7 @@
#vlan.3 up up
#vlan.999 up down
# grnoc-mon at LEFLORE-PS-LR-004337> show configuration
-## Last commit: 2016-08-04 08:57:41 CDT by sean
+## Last commit: 2016-08-17 21:50:04 CDT by andrew
version 12.1X44.5;
system {
host-name LEFLORE-PS-LR-004337;
@@ -287,15 +286,7 @@
}
}
ge-0/0/1 {
- description "L2 INTERFACE - TRUST-VLAN";
- unit 0 {
- family ethernet-switching {
- port-mode access;
- vlan {
- members TRUST-VLAN;
- }
- }
- }
+ disable;
}
ge-0/0/2 {
disable;
Index: configs/mcclain-co-911-purcell.client.onenet.net
===================================================================
--- configs/mcclain-co-911-purcell.client.onenet.net (revision 142519)
+++ configs/mcclain-co-911-purcell.client.onenet.net (working copy)
@@ -0,0 +1,903 @@
+# RANCID-CONTENT-TYPE: juniper
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show system commit
+# 2016-08-17 21:56:24 CDT by andrew via cli
+# 2016-08-17 21:55:47 CDT by andrew via cli
+# 2016-05-09 11:15:50 CDT by admin via cli
+# 2015-08-30 17:19:34 CDT by admin via cli
+# 2015-08-30 17:14:43 CDT by admin via cli
+# 2015-07-17 11:02:15 CDT by admin via cli
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis environment
+# Class Item Status Measurement
+# Temp Routing Engine OK
+# Routing Engine CPU Absent
+# Fans SRX220 Chassis fan 0 OK
+# SRX220 Chassis fan 1 OK
+# Power Power Supply 0 OK
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis firmware
+# Part Type Version
+# FPC 0 O/S Version 12.1X46-D20.5 by builder on 2014-05
+# FWDD O/S Version 12.1X46-D20.5 by builder on 2014-05
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis fpc detail
+# Slot 0 information:
+# State Online
+# Total CPU DRAM ---- CPU less FPC ----
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis hardware
+# Hardware inventory:
+# Item Version Part number Serial number Description
+# Chassis CF0214AK0351 SRX220H2
+# Routing Engine REV 04 750-048778 ACKX4845 RE-SRX220H2
+# FPC 0 FPC
+# PIC 0 8x GE Base PIC
+# Power Supply 0
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis hardware models
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis routing-engine
+# Routing Engine status:
+# Serial ID ACKX4845
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis scb
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis sfm detail
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show chassis ssb
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show system boot-messages
+# kld_map_v: 0x8ff80000, kld_map_p: 0x0
+# Copyright (c) 1996-2014, Juniper Networks, Inc.
+# All rights reserved.
+# Copyright (c) 1992-2006 The FreeBSD Project.
+# Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
+# The Regents of the University of California. All rights reserved.
+# FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
+# Security policy loaded: JUNOS MAC/pcap (mac_pcap)
+# Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
+# netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1
+# cpu0 on motherboard
+# : CAVIUM's OCTEON 5020 CPU Rev. 0.1 with no FPU implemented
+# L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
+# L2 Cache: Size 128kb, 8 way
+# obio0 on motherboard
+# uart0: <Octeon-16550 channel 0> on obio0
+# uart0: console (9600,n,8,1)
+# twsi0 on obio0
+# dwc0: <Synopsis DWC OTG Controller Driver> on obio0
+# usb0: <USB Bus for DWC OTG Controller> on dwc0
+# usb0: USB revision 2.0
+# uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
+# uhub0: 1 port with 1 removable, self powered
+# uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
+# uhub1: single transaction translator
+# uhub1: 3 ports with 2 removable, self powered
+# cpld0 on obio0
+# pcib0: <Cavium on-chip PCI bridge> on obio0
+# Disabling Octeon big bar support
+# PCI Status: PCI 32-bit: 0xc041b
+# pcib0: Initialized controller
+# pci0: <PCI bus> on pcib0
+# pci0: <simple comms> at device 1.0 (no driver attached)
+# atapci0: <SiI 0680 UDMA133 controller> port 0x8-0xb,0x10-0x17,0x18-0x1b,0x20-0x2f mem 0x8020000-0x80200ff irq 0 at device 2.0 on pci0
+# ata2: <ATA channel 0> on atapci0
+# ata3: <ATA channel 1> on atapci0
+# gblmem0 on obio0
+# octpkt0: <Octeon RGMII> on obio0
+# cfi0: <AMD/Fujitsu - 8MB> on obio0
+# Timecounter "mips" frequency 700000000 Hz quality 0
+# ###PCB Group initialized for udppcbgroup
+# ###PCB Group initialized for tcppcbgroup
+# ad0: Device does not support APM
+# ad0: 2000MB <CF 2GB 20100924> at ata2-master WDMA2
+# Trying to mount root from ufs:/dev/ad0s2a
+# WARNING: / was not properly dismounted
+# WARNING: / was not properly dismounted
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show version
+# Hostname: MCCLAIN-CO-911-PURCELL-MR # Model: srx220h2 # JUNOS Software Release [12.1X46-D20.5] # # grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> file list /var/tmp detail # lrw-r--r-- 1 root wheel 11 May 14 2014 /var/tmp@ -> /cf/var/tmp
+# total files: 1
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show system uptime
+# System booted: 2016-07-15 02:20 CDT
+# Protocols started: 2016-07-15 02:22 CDT
+# Last configured: 2016-08-17 21:56 CDT by andrew
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show interface terse
+#Interface Admin Link
+#ge-0/0/0 up up
+#ge-0/0/0.0 up up
+#gr-0/0/0 up up
+#ip-0/0/0 up up
+#lsq-0/0/0 up up
+#lt-0/0/0 up up
+#mt-0/0/0 up up
+#sp-0/0/0 up up
+#sp-0/0/0.0 up up
+#sp-0/0/0.16383 up up
+#ge-0/0/1 up down
+#ge-0/0/1.0 up down
+#ge-0/0/2 down down
+#ge-0/0/3 down down
+#ge-0/0/4 down down
+#ge-0/0/5 up down
+#ge-0/0/5.0 up down
+#ge-0/0/6 up up
+#ge-0/0/6.0 up up
+#ge-0/0/7 up up
+#ge-0/0/7.0 up up
+#fxp2 up up
+#fxp2.0 up up
+#gre up up
+#ipip up up
+#irb up up
+#lo0 up up
+#lo0.0 up up
+#lo0.16384 up up
+#lo0.16385 up up
+#lo0.32768 up up
+#lsi up up
+#mtun up up
+#pimd up up
+#pime up up
+#pp0 up up
+#ppd0 up up
+#ppe0 up up
+#st0 up up
+#st0.0 up up
+#tap up up
+#vlan up up
+#vlan.3 up up
+#vlan.4 up up
+#vlan.5 up down
+#vlan.10 up up
+#vlan.999 up down
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show configuration
+## Last commit: 2016-08-17 21:56:24 CDT by andrew
+version 12.1X46-D20.5;
+system {
+ host-name MCCLAIN-CO-911-PURCELL-MR;
+ domain-name onenet.net;
+ time-zone America/Chicago;
+ authentication-order [ radius password ];
+ ports {
+ console log-out-on-disconnect;
+ }
+ root-authentication {
+# encrypted-password <removed>;
+ }
+ name-server {
+ 164.58.253.10;
+ 164.58.198.10;
+ }
+ radius-server {
+ 156.110.31.11 {
+# secret "<removed>"; ## SECRET-DATA
+ source-address 156.110.24.66;
+ }
+ }
+ radius-options {
+ attributes {
+ nas-ip-address 156.110.24.66;
+ }
+ }
+ login {
+ message "\n+----------------------------------------------------------------------------+\n| |\n| Managed by Oklahoma State Regents for Higher Education |\n| Oklahoma Network for Education Enrichment (ONENET) |\n| |\n| *** Unauthorized Use or Access Prohibited *** |\n| |\n| For more information, contact: |\n| |\n| Oklahoma State Regents for Higher Education |\n| Educational Telecommunications Network -- ONENET |\n| (888) 566-3638 |\n| !
info at onenet.net |\n| |\n+----------------------------------------------------------------------------+\n";
+ class admin {
+ idle-timeout 30;
+ permissions all;
+ }
+ class lockdown {
+ idle-timeout 2;
+ permissions view;
+ deny-commands .*;
+ deny-configuration .*;
+ }
+ class operator-local {
+ idle-timeout 15;
+ permissions [ access admin configure firewall interface network routing snmp system trace view ];
+ allow-commands "show log messages";
+ }
+ class robot {
+ idle-timeout 10;
+ permissions [ admin configure firewall interface routing secret security snmp system trace view ];
+ }
+ user admin {
+ uid 1000;
+ class super-user;
+ authentication {
+# encrypted-password <removed>;
+ }
+ }
+ user eng {
+ uid 2018;
+ class admin;
+ }
+ user mcclain911 {
+ uid 2004;
+ class admin;
+ authentication {
+# encrypted-password <removed>;
+ }
+ }
+ user rancid {
+ uid 2001;
+ class robot;
+ }
+ user remote {
+ uid 2002;
+ class operator-local;
+ }
+ user upgrades {
+ uid 2003;
+ class operator;
+ authentication {
+# ssh-rsa <removed>;
+ }
+ }
+ }
+ services {
+ ssh {
+ root-login deny;
+ protocol-version v2;
+ }
+ web-management {
+ https {
+ system-generated-certificate;
+ }
+ }
+ dhcp {
+ pool 10.1.0.0/24 {
+ address-range low 10.1.0.2 high 10.1.0.254;
+ domain-name test.local;
+ name-server {
+ 164.58.253.10;
+ 164.58.198.10;
+ }
+ router {
+ 10.1.0.1;
+ }
+ }
+ pool 10.10.0.0/24 {
+ address-range low 10.10.0.10 high 10.10.0.199;
+ domain-name purcellpd.local;
+ name-server {
+ 164.58.253.10;
+ 164.58.198.10;
+ }
+ router {
+ 10.10.0.1;
+ }
+ }
+ }
+ }
+ syslog {
+ archive size 10m files 5;
+ user * {
+ any emergency;
+ }
+ file messages {
+ any notice;
+ authorization info;
+ }
+ file interactive-commands {
+ interactive-commands any;
+ }
+ file PROTECT-RE {
+ firewall any;
+ archive no-world-readable;
+ }
+ file traffic {
+ any any;
+ match RT_FLOW_SESSION;
+ }
+ file updown {
+ any any;
+ match "SNMP_TRAP_LINK_|(TRAP_LINK)|bgp_rt_maxprefixes_check|RPD_BGP_NEIGHBOR_STATE";
+ }
+ }
+ max-configurations-on-flash 20;
+ max-configuration-rollbacks 20;
+ ntp {
+ server 164.58.3.98 prefer;
+ }
+}
+interfaces {
+ ge-0/0/0 {
+ description "UNTRUST WAN Interface";
+ unit 0 {
+ family ethernet-switching {
+ vlan {
+ members UNTRUST-VLAN;
+ }
+ }
+ }
+ }
+ ge-0/0/1 {
+ unit 0 {
+ description TEST-INTERFACE;
+ family ethernet-switching {
+ vlan {
+ members TEST-VLAN;
+ }
+ }
+ }
+ }
+ ge-0/0/2 {
+ disable;
+ }
+ ge-0/0/3 {
+ disable;
+ }
+ ge-0/0/4 {
+ disable;
+ }
+ ge-0/0/5 {
+ description "PBX LAN Interface";
+ unit 0 {
+ family ethernet-switching {
+ vlan {
+ members PBX-VLAN;
+ }
+ }
+ }
+ }
+ ge-0/0/6 {
+ description "TRUST LAN - OLETS Router";
+ unit 0 {
+ family ethernet-switching {
+ vlan {
+ members OLETS-VLAN;
+ }
+ }
+ }
+ }
+ ge-0/0/7 {
+ description "TRUST LAN Interface";
+ unit 0 {
+ family ethernet-switching {
+ vlan {
+ members TRUST-VLAN;
+ }
+ }
+ }
+ }
+ lo0 {
+ unit 0 {
+ family inet {
+ filter {
+ input PROTECT-RE;
+ }
+ }
+ }
+ }
+ st0 {
+ unit 0 {
+ description "VPN to Blanchard";
+ family inet;
+ }
+ }
+ vlan {
+ unit 3 {
+ description "L3 INTERFACE - UNTRUST-VLAN - 156.110.24.66/30";
+ family inet {
+ address 156.110.24.66/30;
+ }
+ }
+ unit 4 {
+ description "L3 INTERFACE - TRUST-VLAN - 10.91.1.1/24";
+ family inet {
+ address 10.91.1.1/24 {
+ preferred;
+ }
+ address 10.91.1.2/24;
+ }
+ }
+ unit 5 {
+ description "L3 INTERFACE - PBX-VLAN - 192.168.2.100/24";
+ family inet {
+ address 192.168.2.100/24;
+ }
+ }
+ unit 10 {
+ description "L3 INTERFACE - OLETS-VLAN - 10.10.0.1/24";
+ family inet {
+ address 10.10.0.1/24;
+ }
+ }
+ unit 999 {
+ description "L3 INTERFACE - TEST-VLAN - 10.1.0.1/24";
+ family inet {
+ address 10.1.0.1/24;
+ }
+ }
+ }
+}
+snmp {
+ description OneNet;
+ contact "Net Group";
+ community "<removed>" {
+ authorization read-only;
+ }
+ community "<removed>" {
+ authorization read-only;
+ }
+ community "<removed>" {
+ authorization read-write;
+ }
+}
+routing-options {
+ static {
+ route 0.0.0.0/0 next-hop 156.110.24.65;
+ route 10.91.2.0/24 next-hop st0.0;
+ }
+}
+protocols {
+ oam {
+ ethernet {
+ connectivity-fault-management {
+ maintenance-domain ONENET {
+ level 5;
+ maintenance-association PUR151MCC {
+ continuity-check {
+ interval 1m;
+ }
+ mep 101 {
+ interface ge-0/0/0.0;
+ direction down;
+ auto-discovery;
+ }
+ }
+ }
+ }
+ }
+ }
+ lldp {
+ interface all;
+ }
+ stp;
+}
+policy-options {
+ prefix-list PRE-MGMT-SOURCES {
+ 10.91.2.0/24;
+ 156.110.31.0/27;
+ 156.110.31.32/28;
+ 164.58.253.0/24;
+ }
+ prefix-list PRE-LOCALIPv4-SOURCES {
+ apply-path "interfaces <*> unit <*> family inet address <*>";
+ }
+}
+security {
+ ike {
+ proposal pre-g2-aes128-sha {
+ authentication-method pre-shared-keys;
+ dh-group group2;
+ authentication-algorithm sha1;
+ encryption-algorithm aes-128-cbc;
+ lifetime-seconds 28800;
+ }
+ policy IKE-BLANCHARD-PD {
+ mode main;
+ proposals pre-g2-aes128-sha;
+# pre-shared-#key <removed>;
+ }
+ policy IKE-DYN-VPN-POLICY {
+ mode aggressive;
+ proposal-set standard;
+# pre-shared-#key <removed>;
+ }
+ gateway IKE-GATE-BLANCHARD-PD {
+ ike-policy IKE-BLANCHARD-PD;
+ address 156.110.24.70;
+ external-interface vlan.3;
+ }
+ gateway DYN-VPN-LOCAL-GW {
+ ike-policy IKE-DYN-VPN-POLICY;
+ dynamic {
+ hostname dynvpn;
+ connections-limit 2;
+ ike-user-type group-ike-id;
+ }
+ external-interface vlan.3;
+ xauth access-profile DYN-VPN-ACCESS-PROFILE;
+ }
+ }
+ ipsec {
+ proposal g2-esp-aes128-sha {
+ description group2;
+ protocol esp;
+ authentication-algorithm hmac-sha1-96;
+ encryption-algorithm aes-128-cbc;
+ lifetime-seconds 3600;
+ }
+ policy VPN-POLICY-BLANCHARD-PD {
+ proposals g2-esp-aes128-sha;
+ }
+ policy IPSEC-DYN-VPN-POLICY {
+ proposal-set standard;
+ }
+ vpn IPSEC-VPN-BLANCHARD-PD {
+ bind-interface st0.0;
+ ike {
+ gateway IKE-GATE-BLANCHARD-PD;
+ ipsec-policy VPN-POLICY-BLANCHARD-PD;
+ }
+ establish-tunnels immediately;
+ }
+ vpn DYN-VPN {
+ ike {
+ gateway DYN-VPN-LOCAL-GW;
+ ipsec-policy IPSEC-DYN-VPN-POLICY;
+ }
+ }
+ }
+ dynamic-vpn {
+ access-profile DYN-VPN-ACCESS-PROFILE;
+ clients {
+ all {
+ remote-protected-resources {
+ 10.91.1.0/24;
+ 10.91.2.0/24;
+ }
+ remote-exceptions {
+ 0.0.0.0/0;
+ }
+ ipsec-vpn DYN-VPN;
+ user {
+ mcclain911;
+ }
+ }
+ }
+ }
+ screen {
+ ids-option UNTRUST-SCREEN {
+ icmp {
+ ping-death;
+ }
+ ip {
+ source-route-option;
+ tear-drop;
+ }
+ tcp {
+ syn-flood {
+ alarm-threshold 1024;
+ attack-threshold 200;
+ source-threshold 1024;
+ destination-threshold 2048;
+ timeout 20;
+ }
+ land;
+ }
+ }
+ }
+ nat {
+ source {
+ rule-set TRUST-TO-UNTRUST-NAT {
+ from zone TRUST;
+ to zone UNTRUST;
+ rule NAT-TRUST-TO-UNTRUST {
+ match {
+ source-address 0.0.0.0/0;
+ }
+ then {
+ source-nat {
+ interface;
+ }
+ }
+ }
+ }
+ rule-set TEST-TO-UNTRUST-NAT {
+ from zone TEST;
+ to zone UNTRUST;
+ rule NAT-TEST-TO-UNTRUST {
+ match {
+ source-address 0.0.0.0/0;
+ }
+ then {
+ source-nat {
+ interface;
+ }
+ }
+ }
+ }
+ }
+ }
+ policies {
+ from-zone TRUST to-zone UNTRUST {
+ policy TRUST-TO-UNTRUST {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone TRUST to-zone PBX {
+ policy TRUST-TO-PBX {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone PBX to-zone TRUST {
+ policy TRUST-TO-PBX {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone TEST to-zone UNTRUST {
+ policy ALLOW-ALL-OUT {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone VPN to-zone TRUST {
+ policy VPN-TO-TRUST {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone TRUST to-zone VPN {
+ policy TRUST-TO-VPN {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone UNTRUST to-zone TRUST {
+ policy DYN-VPN-POLICY {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit {
+ tunnel {
+ ipsec-vpn DYN-VPN;
+ }
+ }
+ }
+ }
+ }
+ }
+ zones {
+ security-zone TRUST {
+ host-inbound-traffic {
+ system-services {
+ dns;
+ ping;
+ traceroute;
+ ssh;
+ }
+ }
+ interfaces {
+ vlan.4;
+ vlan.10 {
+ host-inbound-traffic {
+ system-services {
+ ping;
+ traceroute;
+ dhcp;
+ }
+ }
+ }
+ }
+ }
+ security-zone PBX {
+ host-inbound-traffic {
+ system-services {
+ dns;
+ ping;
+ traceroute;
+ }
+ }
+ interfaces {
+ vlan.5;
+ }
+ }
+ security-zone TEST {
+ host-inbound-traffic {
+ system-services {
+ dns;
+ ping;
+ traceroute;
+ }
+ }
+ interfaces {
+ vlan.999 {
+ host-inbound-traffic {
+ system-services {
+ dhcp;
+ }
+ }
+ }
+ }
+ }
+ security-zone UNTRUST {
+ screen UNTRUST-SCREEN;
+ host-inbound-traffic {
+ system-services {
+ ping;
+ snmp;
+ ssh;
+ traceroute;
+ ike;
+ https;
+ }
+ }
+ interfaces {
+ vlan.3;
+ }
+ }
+ security-zone VPN {
+ host-inbound-traffic {
+ system-services {
+ traceroute;
+ ping;
+ ssh;
+ }
+ }
+ interfaces {
+ st0.0;
+ }
+ }
+ }
+}
+firewall {
+ family inet {
+ filter PROTECT-RE {
+ term SSH-ALLOW {
+ from {
+ source-prefix-list {
+ PRE-MGMT-SOURCES;
+ PRE-LOCALIPv4-SOURCES;
+ }
+ protocol tcp;
+ destination-port ssh;
+ }
+ then accept;
+ }
+ term SNMP-ALLOW {
+ from {
+ source-prefix-list {
+ PRE-MGMT-SOURCES;
+ PRE-LOCALIPv4-SOURCES;
+ }
+ protocol udp;
+ destination-port snmp;
+ }
+ then accept;
+ }
+ term SSH-DENY {
+ from {
+ protocol tcp;
+ destination-port ssh;
+ }
+ then {
+ discard;
+ }
+ }
+ term SNMP-DENY {
+ from {
+ protocol tcp;
+ destination-port snmp;
+ }
+ then {
+ discard;
+ }
+ }
+ term ALL-TRAFFIC {
+ then accept;
+ }
+ }
+ }
+}
+access {
+ profile DYN-VPN-ACCESS-PROFILE {
+ client mcclain911 {
+ firewall-user {
+ password "$9$A2UwpBRSyK8LNrlGDiH.mfTQ"; ## SECRET-DATA
+ }
+ }
+ address-assignment {
+ pool DYN-VPN-ADDRESS-POOL;
+ }
+ }
+ address-assignment {
+ pool DYN-VPN-ADDRESS-POOL {
+ family inet {
+ network 10.91.3.0/24;
+ range dvpn-range {
+ low 10.91.3.10;
+ high 10.91.3.20;
+ }
+ dhcp-attributes {
+ domain-name OKMCT911.local;
+ }
+ xauth-attributes {
+ primary-dns 10.91.1.201/32;
+ }
+ }
+ }
+ }
+ firewall-authentication {
+ web-authentication {
+ default-profile DYN-VPN-ACCESS-PROFILE;
+ }
+ }
+}
+ethernet-switching-options {
+ secure-access-port {
+ interface ge-0/0/1.0 {
+ mac-limit 3 action shutdown;
+ }
+ }
+ bpdu-block {
+ interface ge-0/0/1.0;
+ }
+}
+vlans {
+ OLETS-VLAN {
+ description OLETS-VLAN;
+ vlan-id 10;
+ l3-interface vlan.10;
+ }
+ PBX-VLAN {
+ description PBX-VLAN;
+ vlan-id 5;
+ l3-interface vlan.5;
+ }
+ TEST-VLAN {
+ description "Test VLAN 999 for TESTING ONLY";
+ vlan-id 999;
+ l3-interface vlan.999;
+ }
+ TRUST-VLAN {
+ description TRUST-VLAN;
+ vlan-id 4;
+ l3-interface vlan.4;
+ }
+ UNTRUST-VLAN {
+ description UNTRUST-VLAN;
+ vlan-id 3;
+ l3-interface vlan.3;
+ }
+}
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show ospf neighbor
+# OSPF instance is not running
+#
+# grnoc-mon at MCCLAIN-CO-911-PURCELL-MR> show bfd session
+
+0 sessions, 0 clients
+Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
+
Index: configs/stringtown-high-school.client.onenet.net
===================================================================
--- configs/stringtown-high-school.client.onenet.net (revision 145665)
+++ configs/stringtown-high-school.client.onenet.net (working copy)
@@ -674,6 +674,7 @@
# OSPF instance is not running
#
# grnoc-mon at STRINGTOWN-HIGH-SCHOOL-TAG-004909> show bfd session
+quit
0 sessions, 0 clients
Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/sepls-mcalester-pl.client.onenet.net
===================================================================
--- configs/sepls-mcalester-pl.client.onenet.net (revision 145669)
+++ configs/sepls-mcalester-pl.client.onenet.net (working copy)
@@ -0,0 +1,680 @@
+# RANCID-CONTENT-TYPE: juniper
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show system commit
+# 2016-08-17 21:47:32 CDT by admin via cli
+# 2016-08-17 21:47:01 CDT by admin via cli
+# 2016-08-16 23:23:34 CDT by admin via cli
+# 2016-08-16 23:21:29 CDT by admin via cli commit confirmed, rollback in 3mins
+# 2016-08-17 02:28:28 CDT by admin via cli
+# 2016-08-17 02:26:30 CDT by admin via cli
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis environment
+# Class Item Status Measurement
+# Temp Routing Engine OK
+# Routing Engine CPU OK
+# Fans SRX340 Chassis fan 0 OK
+# SRX340 Chassis fan 1 OK
+# SRX340 Chassis fan 2 OK
+# SRX340 Chassis fan 3 OK
+# Power Power Supply 0 OK
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis firmware
+# Part Type Version
+# FPC 0 O/S Version 15.1X49-D50.3 by builder on 2016-05-28 19:58:05 UTC
+# FWDD O/S Version 15.1X49-D50.3 by builder on 2016-05-28 19:58:05 UTC
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis fpc detail
+# Slot 0 information:
+# State Online
+# Total CPU DRAM ---- CPU less FPC ----
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis hardware
+# Hardware inventory:
+# Item Version Part number Serial number Description
+# Chassis CY1716AF1080 SRX340
+# Routing Engine REV 0x06 650-065043 CY1716AF1080 RE-SRX340
+# FPC 0 FPC
+# PIC 0 8xGE,8xGE SFP Base PIC
+# Power Supply 0
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis hardware models
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis routing-engine
+# Routing Engine status:
+# Serial ID CY1716AF1080
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis scb
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis sfm detail
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show chassis ssb
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show system boot-messages
+# kld_map_v: 0x8ff80000, kld_map_p: 0x0
+# Running in PARTITIONED TLB MODE
+# Copyright (c) 1996-2016, Juniper Networks, Inc.
+# All rights reserved.
+# Copyright (c) 1992-2007 The FreeBSD Project.
+# Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
+# The Regents of the University of California. All rights reserved.
+# FreeBSD is a registered trademark of The FreeBSD Foundation.
+# can't re-use a leaf (debug)!
+# FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
+# Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
+# Security policy loaded: Junos MAC/veriexec (mac_veriexec)
+# Security policy loaded: JUNOS MAC/pcap (mac_pcap)
+# MAC/veriexec fingerprint module loaded: SHA256
+# MAC/veriexec fingerprint module loaded: SHA1
+# netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
+# cpu0 on motherboard
+# : CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented
+# L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way.
+# L2 Cache: Size 512kb, 4 way
+# obio0 on motherboard
+# uart0: <Octeon-16550 channel 0> on obio0
+# uart0: console (9600,n,8,1)
+# twsi0 on obio0
+# set clock 0x58
+# xhci0: <Cavium Octeon 7xxx xHCI Host Driver> on obio0
+# usb0: <USB bus for xHCI Controller> on xhci0
+# usb0: USB revision 3.0
+# uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
+# uhub0: 2 ports with 2 removable, self powered
+# xhci1: <Cavium Octeon 7xxx xHCI Host Driver> on obio0
+# usb1: <USB bus for xHCI Controller> on xhci1
+# usb1: USB revision 3.0
+# uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
+# uhub1: 2 ports with 2 removable, self powered
+# cpld0 on obio0
+# pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
+# Disabling Octeon big bar support
+# pcib0: Initialized controller
+# pci0: <PCI bus> on pcib0
+# pci0: <network, ethernet> at device 0.0 (no driver attached)
+# pci0: <network, ethernet> at device 0.1 (no driver attached)
+# gblmem0 on obio0
+# octpkt0: <Octeon RGMII> on obio0
+# cfi0: <Macronix MX25L64 - 8MB> on obio0
+# cfi1: <Macronix MX25L64 - 8MB> on obio0
+# octagl0: <Octeon AGL> on obio0
+# umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2
+# miibus0: <MII bus> on octagl0
+# brgphy0: <BCM54616S 10/100/1000baseTX PHY> on miibus0
+# brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
+# Timecounter "mips" frequency 1200000000 Hz quality 0
+# Registered AMT tunnel Encap with UDP Tunnel!
+# Loading Redundant LT driver
+# ###PCB Group initialized for udppcbgroup
+# ###PCB Group initialized for tcppcbgroup
+# Kernel thread "wkupdaemon" (pid 48) exited prematurely.
+# da0 at umass-sim0 bus 0 target 0 lun 0
+# da0: <ATP ATP CG eUSB 1100> Fixed Direct Access SCSI-4 device
+# da0: 40.000MB/s transfers
+# da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C)
+# Trying to mount root from ufs:/dev/da0s1a
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show version
+# Hostname: SEPLS-MCALESTER-PL-LR-005248 # Model: srx340 # Junos: 15.1X49-D50.3 # JUNOS Software Release [15.1X49-D50.3] # # grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> file list /var/tmp detail # lrw-r--r-- 1 root wheel 11 May 28 16:00 /var/tmp@ -> /cf/var/tmp
+# total files: 1
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show system uptime
+# Time Source: NTP CLOCK
+# System booted: 2016-08-16 19:05 CDT
+# Protocols started: 2016-08-16 19:05 CDT
+# Last configured: 2016-08-17 21:47 CDT by admin
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show interface terse
+#Interface Admin Link
+#ge-0/0/0 up up
+#ge-0/0/0.200 up up
+#ge-0/0/0.201 up up
+#ge-0/0/0.32767 up up
+#gr-0/0/0 up up
+#ip-0/0/0 up up
+#lsq-0/0/0 up up
+#lt-0/0/0 up up
+#mt-0/0/0 up up
+#sp-0/0/0 up up
+#sp-0/0/0.0 up up
+#sp-0/0/0.16383 up up
+#ge-0/0/1 up down
+#ge-0/0/1.0 up down
+#ge-0/0/2 down down
+#ge-0/0/3 down down
+#ge-0/0/4 down down
+#ge-0/0/5 down down
+#ge-0/0/6 up up
+#ge-0/0/6.0 up up
+#ge-0/0/7 up up
+#ge-0/0/7.0 up up
+#ge-0/0/8 down down
+#ge-0/0/9 down down
+#ge-0/0/10 down down
+#ge-0/0/11 down down
+#ge-0/0/12 down down
+#ge-0/0/13 down down
+#ge-0/0/14 down down
+#ge-0/0/15 down down
+#fxp0 down down
+#fxp2 up up
+#fxp2.0 up up
+#gre up up
+#ipip up up
+#irb up up
+#lo0 up up
+#lo0.0 up up
+#lo0.16384 up up
+#lo0.16385 up up
+#lo0.32768 up up
+#lsi up up
+#mtun up up
+#pimd up up
+#pime up up
+#pp0 up up
+#ppd0 up up
+#ppe0 up up
+#st0 up up
+#tap up up
+#vlan up down
+#vtep up up
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show configuration
+## Last commit: 2016-08-17 21:47:32 CDT by admin
+version 15.1X49-D50.3;
+system {
+ host-name SEPLS-MCALESTER-PL-LR-005248;
+ auto-snapshot;
+ domain-name onenet.net;
+ time-zone America/Chicago;
+ authentication-order [ radius password ];
+ ports {
+ console log-out-on-disconnect;
+ }
+ root-authentication {
+# encrypted-password <removed>;
+ }
+ name-server {
+ 164.58.253.10;
+ 164.58.198.10;
+ }
+ radius-server {
+ 156.110.31.11 {
+# secret "<removed>"; ## SECRET-DATA
+ source-address 156.110.130.246;
+ }
+ }
+ radius-options {
+ attributes {
+ nas-ip-address 156.110.130.246;
+ }
+ }
+ login {
+ message "\n+----------------------------------------------------------------------------+\n| |\n| Managed by Oklahoma State Regents for Higher Education |\n| Oklahoma Network for Education Enrichment (ONENET) |\n| |\n| *** Unauthorized Use or Access Prohibited *** |\n| |\n| For more information, contact: |\n| |\n| Oklahoma State Regents for Higher Education |\n| Educational Telecommunications Network -- ONENET |\n| (888) 566-3638 |\n| !
info at onenet.net |\n| |\n+----------------------------------------------------------------------------+\n";
+ class admin {
+ idle-timeout 30;
+ permissions all;
+ }
+ class lockdown {
+ idle-timeout 2;
+ permissions view;
+ deny-commands .*;
+ deny-configuration .*;
+ }
+ class operator-local {
+ idle-timeout 15;
+ permissions [ access admin configure firewall interface network routing snmp system trace view ];
+ allow-commands "show log messages";
+ }
+ class robot {
+ idle-timeout 10;
+ permissions [ admin configure firewall interface routing secret security snmp system trace view ];
+ }
+ user admin {
+ uid 1000;
+ class super-user;
+ authentication {
+# encrypted-password <removed>;
+ }
+ }
+ user client {
+ uid 2000;
+ class admin;
+ authentication {
+# encrypted-password <removed>;
+ }
+ }
+ user eng {
+ uid 2018;
+ class admin;
+ }
+ user rancid {
+ uid 2001;
+ class robot;
+ }
+ user remote {
+ uid 2002;
+ class operator-local;
+ }
+ user upgrades {
+ uid 2003;
+ class operator;
+ authentication {
+# ssh-rsa <removed>;
+ }
+ }
+ }
+ services {
+ ssh {
+ root-login deny;
+ protocol-version v2;
+ }
+ dhcp {
+ pool 10.1.0.0/24 {
+ address-range low 10.1.0.2 high 10.1.0.254;
+ domain-name test.local;
+ name-server {
+ 164.58.253.10;
+ 164.58.198.10;
+ }
+ router {
+ 10.1.0.1;
+ }
+ }
+ }
+ }
+ syslog {
+ archive size 10m files 5;
+ user * {
+ any emergency;
+ }
+ file messages {
+ any notice;
+ authorization info;
+ }
+ file interactive-commands {
+ interactive-commands any;
+ }
+ file PROTECT-RE {
+ firewall any;
+ archive no-world-readable;
+ }
+ file traffic {
+ any any;
+ match RT_FLOW_SESSION;
+ }
+ file updown {
+ any any;
+ match "SNMP_TRAP_LINK_|(TRAP_LINK)|bgp_rt_maxprefixes_check|RPD_BGP_NEIGHBOR_STATE";
+ }
+ }
+ max-configurations-on-flash 20;
+ max-configuration-rollbacks 20;
+ ntp {
+ server 164.58.3.98 prefer;
+ }
+}
+security {
+ forwarding-options {
+ family {
+ inet6 {
+ mode flow-based;
+ }
+ }
+ }
+ screen {
+ ids-option UNTRUST-SCREEN {
+ icmp {
+ ping-death;
+ }
+ ip {
+ source-route-option;
+ tear-drop;
+ }
+ tcp {
+ syn-flood {
+ alarm-threshold 1024;
+ attack-threshold 200;
+ source-threshold 1024;
+ destination-threshold 2048;
+ timeout 20;
+ }
+ land;
+ }
+ }
+ }
+ nat {
+ source {
+ rule-set TEST-TO-UNTRUST-NAT {
+ from zone TEST;
+ to zone UNTRUST;
+ rule NAT-TEST-TO-UNTRUST {
+ match {
+ source-address 0.0.0.0/0;
+ }
+ then {
+ source-nat {
+ interface;
+ }
+ }
+ }
+ }
+ }
+ }
+ policies {
+ from-zone TEST to-zone UNTRUST {
+ policy TEST-TO-UNTRUST {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone UNTRUST to-zone UNTRUST {
+ policy UNTRUST-TO-UNTRUST {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ from-zone MPLS to-zone MPLS {
+ policy MPLS-TO-MPLS {
+ match {
+ source-address any;
+ destination-address any;
+ application any;
+ }
+ then {
+ permit;
+ }
+ }
+ }
+ }
+ zones {
+ security-zone TEST {
+ interfaces {
+ ge-0/0/1.0 {
+ host-inbound-traffic {
+ system-services {
+ dhcp;
+ ping;
+ traceroute;
+ }
+ }
+ }
+ }
+ }
+ security-zone UNTRUST {
+ screen UNTRUST-SCREEN;
+ interfaces {
+ ge-0/0/0.200 {
+ host-inbound-traffic {
+ system-services {
+ ping;
+ snmp;
+ ssh;
+ traceroute;
+ }
+ }
+ }
+ ge-0/0/7.0 {
+ host-inbound-traffic {
+ system-services {
+ ping;
+ traceroute;
+ }
+ }
+ }
+ }
+ }
+ security-zone MPLS {
+ interfaces {
+ ge-0/0/0.201 {
+ host-inbound-traffic {
+ system-services {
+ ping;
+ snmp;
+ ssh;
+ traceroute;
+ }
+ }
+ }
+ ge-0/0/6.0 {
+ host-inbound-traffic {
+ system-services {
+ ping;
+ traceroute;
+ }
+ }
+ }
+ }
+ }
+ }
+}
+interfaces {
+ ge-0/0/0 {
+ description "TO ONENET";
+ vlan-tagging;
+ unit 200 {
+ description "UNTRUST-WAN - 156.110.130.246/30";
+ vlan-id 200;
+ family inet {
+ address 156.110.130.246/30;
+ }
+ }
+ unit 201 {
+ description "MPLS-WAN - 10.199.4.179/31";
+ vlan-id 201;
+ family inet {
+ address 10.199.4.179/31;
+ }
+ }
+ }
+ ge-0/0/1 {
+ description "TEST - 10.1.0.1/24";
+ unit 0 {
+ family inet {
+ address 10.1.0.1/24;
+ }
+ }
+ }
+ ge-0/0/2 {
+ disable;
+ }
+ ge-0/0/3 {
+ disable;
+ }
+ ge-0/0/4 {
+ disable;
+ }
+ ge-0/0/5 {
+ disable;
+ }
+ ge-0/0/6 {
+ description "MPLS-LAN - 192.168.0.2/30";
+ unit 0 {
+ family inet {
+ address 192.168.0.2/30;
+ }
+ }
+ }
+ ge-0/0/7 {
+ description "UNTRUST-LAN - 164.58.81.1/24";
+ unit 0 {
+ family inet {
+ address 164.58.81.1/24;
+ }
+ }
+ }
+ ge-0/0/8 {
+ disable;
+ }
+ ge-0/0/9 {
+ disable;
+ }
+ ge-0/0/10 {
+ disable;
+ }
+ ge-0/0/11 {
+ disable;
+ }
+ ge-0/0/12 {
+ disable;
+ }
+ ge-0/0/13 {
+ disable;
+ }
+ ge-0/0/14 {
+ disable;
+ }
+ ge-0/0/15 {
+ disable;
+ }
+ fxp0 {
+ disable;
+ }
+ lo0 {
+ unit 0 {
+ family inet {
+ filter {
+ input PROTECT-RE;
+ }
+ }
+ }
+ }
+}
+snmp {
+ description OneNet;
+ contact "Net Group";
+ community "<removed>" {
+ authorization read-only;
+ }
+ community "<removed>" {
+ authorization read-only;
+ }
+ community "<removed>" {
+ authorization read-write;
+ }
+}
+routing-options {
+ static {
+ route 0.0.0.0/0 next-hop 156.110.130.245;
+ }
+}
+protocols {
+ l2-learning {
+ global-mode switching;
+ }
+}
+policy-options {
+ prefix-list PRE-MGMT-SOURCES {
+ 156.110.31.0/27;
+ 156.110.31.32/28;
+ 164.58.253.0/24;
+ }
+ prefix-list PRE-LOCALIPv4-SOURCES {
+ apply-path "interfaces <*> unit <*> family inet address <*>";
+ }
+}
+firewall {
+ family inet {
+ filter PROTECT-RE {
+ term SSH-ALLOW {
+ from {
+ source-prefix-list {
+ PRE-MGMT-SOURCES;
+ PRE-LOCALIPv4-SOURCES;
+ }
+ protocol tcp;
+ destination-port ssh;
+ }
+ then accept;
+ }
+ term SNMP-ALLOW {
+ from {
+ source-prefix-list {
+ PRE-MGMT-SOURCES;
+ PRE-LOCALIPv4-SOURCES;
+ }
+ protocol udp;
+ destination-port snmp;
+ }
+ then accept;
+ }
+ term SSH-DENY {
+ from {
+ protocol tcp;
+ destination-port ssh;
+ }
+ then {
+ discard;
+ }
+ }
+ term SNMP-DENY {
+ from {
+ protocol udp;
+ destination-port snmp;
+ }
+ then {
+ discard;
+ }
+ }
+ term ALL-TRAFFIC {
+ then accept;
+ }
+ }
+ }
+}
+routing-instances {
+ MPLS {
+ instance-type virtual-router;
+ interface ge-0/0/0.201;
+ interface ge-0/0/6.0;
+ routing-options {
+ static {
+ route 192.168.22.0/23 next-hop 10.199.4.178;
+ route 192.168.8.0/23 next-hop 10.199.4.178;
+ route 192.168.6.0/23 next-hop 10.199.4.178;
+ route 192.168.28.0/23 next-hop 10.199.4.178;
+ route 192.168.24.0/23 next-hop 10.199.4.178;
+ route 192.168.2.0/23 next-hop 10.199.4.178;
+ route 192.168.18.0/23 next-hop 10.199.4.178;
+ route 192.168.26.0/23 next-hop 10.199.4.178;
+ route 192.168.20.0/23 next-hop 10.199.4.178;
+ route 192.168.10.0/23 next-hop 10.199.4.178;
+ route 192.168.12.0/23 next-hop 10.199.4.178;
+ route 192.168.16.0/23 next-hop 10.199.4.178;
+ route 192.168.14.0/23 next-hop 10.199.4.178;
+ route 192.168.4.0/23 next-hop 10.199.4.178;
+ route 192.168.30.0/23 next-hop 10.199.4.178;
+ route 10.199.4.0/24 next-hop 10.199.4.178;
+ route 0.0.0.0/0 next-hop 192.168.0.1;
+ route 10.23.0.0/16 next-hop 10.199.4.178;
+ route 10.19.0.0/16 next-hop 10.199.4.178;
+ route 10.0.0.0/8 next-hop 10.199.4.178;
+ route 10.15.0.0/16 next-hop 10.199.4.178;
+ route 10.3.0.0/16 next-hop 10.199.4.178;
+ route 10.5.0.0/16 next-hop 10.199.4.178;
+ route 10.7.0.0/16 next-hop 10.199.4.178;
+ route 10.9.0.0/16 next-hop 10.199.4.178;
+ route 10.11.0.0/16 next-hop 10.199.4.178;
+ route 10.13.0.0/16 next-hop 10.199.4.178;
+ route 10.17.0.0/16 next-hop 10.199.4.178;
+ route 10.21.0.0/16 next-hop 10.199.4.178;
+ route 10.25.0.0/16 next-hop 10.199.4.178;
+ route 10.27.0.0/16 next-hop 10.199.4.178;
+ route 10.29.0.0/16 next-hop 10.199.4.178;
+ }
+ }
+ }
+}
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show ospf neighbor
+# OSPF instance is not running
+#
+# grnoc-mon at SEPLS-MCALESTER-PL-LR-005248> show bfd session
+
+0 sessions, 0 clients
+Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
+
Index: routers.all
===================================================================
--- routers.all (revision 145651)
+++ routers.all (working copy)
@@ -274,6 +274,7 @@
dps-adva.p.onenet.net:fsp3000
dps-okc-mlk-ge114.nid.onenet.net:fsp150
dps-troop-c-muskogee.nid.onenet.net:fsp150
+dps-troop-f-ardmore.nid.onenet.net:fsp150
dps-tulsa-911.nid.onenet.net:fsp150
dun-adva.p.onenet.net:fsp3000
dur-adva.p.onenet.net:fsp3000
@@ -581,6 +582,7 @@
san-sw-lawton.onenet.net:juniper
say-adva.p.onenet.net:fsp3000
sem-adva.p.onenet.net:fsp3000
+sepls-mcalester-pl.client.onenet.net:juniper
silo-ps.client.onenet.net:juniper
smithville-ps.client.onenet.net:juniper
spiro-ps.client.onenet.net:juniper
More information about the Nocrancid
mailing list