[Nocrancid] autopop-onenet.net/stillwater-ps.nid.onenet.net[0] router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Thu Dec 22 15:44:15 CST 2016
Index: configs/stillwater-ps.nid.onenet.net
===================================================================
--- configs/stillwater-ps.nid.onenet.net (revision 139578)
+++ configs/stillwater-ps.nid.onenet.net (working copy)
@@ -9,12 +9,24 @@
configure system
prompt "ADVA"
#
+#CLI:MANAGEMENT TUNNEL-1 Delete
+#
+home
+configure communication
+ delete mgmttnl mgmt_tnl-1
+#
#CLI:SYSTEM Edit
#
home
configure system
ntp-server-method user-defined
log-server-method user-defined
+ data-export
+ data-export-enable none
+ username ""
+ path ""
+ server-ip ipv4 0.0.0.0
+ back
system-tod-type ntp
auth-traps disabled
serial enabled
@@ -23,21 +35,36 @@
https enabled
telnet disabled
scp enabled
- ftp disabled
sftp enabled
security-banner "WARNING: UNAUTHORIZED USE IS STRICTLY PROHIBITED\\n\\nTo protect the system from unauthorized use,\\nactivities on this system are monitored,recorded and subject to audit.\\nUse of this system is expressed consent to such monitoring and recording.\\nAny unauthorized access or use of this system is prohibited and\\nis subject to criminal and civil penalties and/or administrative action."
security-prompt disabled
ssh enabled
- snmp-engine-id "800009f0030080ea6dc2f0"
+ snmp-engine-id "800009f0030080ea73cd90"
+ utc-leap-offset disabled
+ long-if-alias disabled
+ time-zone
+ dst-control enabled
+ utc-offset "-06:00"
+ dst-offset "+01:00"
+ dst-start-month march
+ dst-end-month november
+ dst-start-day "SUNDAY>=7"
+ dst-end-day "SUNDAY<=8"
+ dst-start-time "02:00"
+ dst-end-time "02:00"
+ back
+ ftp disabled
ntp-client
primary-server ipv4 164.58.3.98
- backup-server ipv4 164.58.29.14
+ backup-server 164.58.29.14
control enabled
polling-interval 16
back
proxy-arp disabled
mgmt-traffic-bridge disabled
mgmt-traffic-bridge-security disabled
+ mgmt-traffic-dscp-control disabled
+ mgmt-traffic-dscp-value 0
proxy-ndp disabled
ipv6-fwd disabled
alarm-attributes system prim-ntp-svr-fail nsa mn
@@ -56,6 +83,8 @@
alarm-attributes system ltp-fail sa mj
alarm-attributes system ltp-in-progress nsa na
alarm-attributes system ipv6-address-conflict sa cr
+ alarm-attributes system dataexport-ftp-fail nsa mn
+ alarm-attributes system traffic-arp-table-full nsa mn
alarm-attributes access-port farend-duplex-unknown nsa mn
alarm-attributes access-port farend-duplex-unknown sa mj
alarm-attributes access-port efm-oam-dying-gasp nsa mn
@@ -94,7 +123,7 @@
alarm-attributes access-port rmt-efm-lpbk-fail sa mn
alarm-attributes access-port bw-exceeds-neg-speed nsa mn
alarm-attributes access-port bw-exceeds-neg-speed sa mj
- alarm-attributes access-port sfp-non-qualified nsa nr
+ alarm-attributes access-port sfp-non-qualified nsa na
alarm-attributes access-port lnkdn-master-slave-cfg nsa mn
alarm-attributes access-port lnkdn-master-slave-cfg sa cr
alarm-attributes access-port link-control-protocol-fail nsa mn
@@ -102,9 +131,13 @@
alarm-attributes access-port link-control-protocol-loopback nsa mn
alarm-attributes access-port link-control-protocol-loopback sa cr
alarm-attributes access-port test-alarm nsa mj
+ alarm-attributes access-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes access-port elmi-not-oper nsa mn
alarm-attributes access-port amp-no-peer sa mj
alarm-attributes access-port amp-prov-fail nsa mn
alarm-attributes access-port amp-config-fail sa cr
+ alarm-attributes access-port lpbk-active nsa na
+ alarm-attributes access-port lpbk-requested nsa na
alarm-attributes network-port forced nsa na
alarm-attributes network-port lockout nsa na
alarm-attributes network-port farend-duplex-unknown nsa mn
@@ -145,7 +178,7 @@
alarm-attributes network-port rmt-efm-lpbk-fail sa mn
alarm-attributes network-port bw-exceeds-neg-speed nsa mn
alarm-attributes network-port bw-exceeds-neg-speed sa mj
- alarm-attributes network-port sfp-non-qualified nsa nr
+ alarm-attributes network-port sfp-non-qualified nsa na
alarm-attributes network-port lnkdn-master-slave-cfg nsa mn
alarm-attributes network-port lnkdn-master-slave-cfg sa cr
alarm-attributes network-port link-control-protocol-fail nsa mn
@@ -153,9 +186,13 @@
alarm-attributes network-port link-control-protocol-loopback nsa mn
alarm-attributes network-port link-control-protocol-loopback sa cr
alarm-attributes network-port test-alarm nsa mj
+ alarm-attributes network-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes network-port elmi-not-oper nsa mn
alarm-attributes network-port amp-no-peer sa mj
alarm-attributes network-port amp-prov-fail nsa mn
alarm-attributes network-port amp-config-fail sa cr
+ alarm-attributes network-port lpbk-active nsa na
+ alarm-attributes network-port lpbk-requested nsa na
alarm-attributes cfm-mep xcon-ccm sa mn
alarm-attributes cfm-mep err-ccm sa mn
alarm-attributes cfm-mep rem-ccm sa mn
@@ -168,30 +205,27 @@
alarm-attributes lag lnkdn sa cr
alarm-attributes lag link-control-protocol-fail sa cr
alarm-attributes lag link-control-protocol-loopback sa cr
- alarm-attributes shelf-nte114 overtemp nsa mn
- alarm-attributes shelf-nte114 undertemp nsa mn
- alarm-attributes nte114 ctneqpt nsa mn
- alarm-attributes nte114 eqpt-flt sa cr
- alarm-attributes nte114 mismatch sa cr
- alarm-attributes nte114 eqpt-rmvd sa cr
- alarm-attributes nte114 test-alarm nsa mj
- alarm-attributes g3-dcn lnkdn nsa na
- alarm-attributes g3-dcn modemnonqualified nsa na
- alarm-attributes g3-dcn modemremoved nsa na
- alarm-attributes g3-dcn no-sim-card nsa na
- alarm-attributes erp-group erp-fop-mismatch sa mj
- alarm-attributes erp-group erp-fop-timeout nsa mn
- alarm-attributes erp-group erp-blockport0-rpl nsa nr
- alarm-attributes erp-group erp-blockport0-sf nsa na
- alarm-attributes erp-group erp-blockport0-ms nsa na
- alarm-attributes erp-group erp-blockport0-fs nsa na
- alarm-attributes erp-group erp-blockport0-wtr nsa na
- alarm-attributes erp-group erp-blockport1-rpl nsa nr
- alarm-attributes erp-group erp-blockport1-sf nsa na
- alarm-attributes erp-group erp-blockport1-ms nsa na
- alarm-attributes erp-group erp-blockport1-fs nsa na
- alarm-attributes erp-group erp-blockport1-wtr nsa na
+ alarm-attributes lag amp-no-peer sa mj
+ alarm-attributes lag amp-prov-fail nsa mn
+ alarm-attributes lag amp-config-fail sa cr
+ alarm-attributes lag lpbk-active nsa na
+ alarm-attributes lag lpbk-requested nsa na
+ alarm-attributes shelf-nte112 overtemp nsa mn
+ alarm-attributes shelf-nte112 undertemp nsa mn
+ alarm-attributes nte112 ctneqpt nsa mn
+ alarm-attributes nte112 eqpt-flt sa cr
+ alarm-attributes nte112 mismatch sa cr
+ alarm-attributes nte112 eqpt-rmvd sa cr
+ alarm-attributes nte112 test-alarm nsa mj
+ alarm-attributes mobile-modem lnkdn nsa na
+ alarm-attributes mobile-modem usbdevicemea nsa na
+ alarm-attributes mobile-modem usbdevicenonqualified nsa na
+ alarm-attributes mobile-modem usbdeviceremoved nsa na
+ alarm-attributes mobile-modem no-sim-card nsa na
alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+ alarm-attributes wifi-dongle usbdevicemea nsa na
+ alarm-attributes wifi-dongle usbdevicenonqualified nsa na
+ alarm-attributes wifi-dongle usbdeviceremoved nsa na
syslog-server 1
configure ip-version ipv4
configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
@@ -254,6 +288,66 @@
acl-entry acl-10
control disabled
configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-11
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-12
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-13
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-14
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-15
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-16
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-17
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-18
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-19
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-20
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-21
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-22
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-23
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-24
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
+ back
+ acl-entry acl-25
+ control disabled
+ configure permit ipv4 0.0.0.0 255.255.255.255
#
#CLI:SECURITY SYSTEM Edit
#
@@ -314,22 +408,14 @@
configure snmp
delete community "public"
#
-#CLI:SAT SYSTEM-1 Edit
-#
-home
-configure sat
- network-element ne-1
- configure sat-system
- ether-type 0x9800
-#
#CLI:SAT SAC PROFILE-1 Edit
#
home
configure system
profile
configure sac-profile sat_sac_profile-1
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_1"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -339,8 +425,8 @@
configure system
profile
configure sac-profile sat_sac_profile-2
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_2"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -350,8 +436,8 @@
configure system
profile
configure sac-profile sat_sac_profile-3
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_3"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -361,8 +447,8 @@
configure system
profile
configure sac-profile sat_sac_profile-4
- name ""
- flr 5.0000
+ name "SAT_SAC_Profile_4"
+ flr 5.000000
ftd 300
fdv 300
#
@@ -383,17 +469,17 @@
home
network-element ne-1
prompt "NE-1"
- name "STILLWATER-PS-GE114"
+ name "STILLWATER-PS-GE112"
contact ""
location ""
pm-interval 15min
admin-state in-service
#
-#CLI:NTE114-1-1-1 Edit
+#CLI:NTE112-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
admin-state in-service
alias ""
snmp-dying-gasp disabled
@@ -402,34 +488,18 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure dcn
admin-state in-service
speed auto
alias ""
mdix auto
#
-#CLI:NETWORK PORT-1-1-1-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-1
- auto-diagnostic enabled
-#
-#CLI:NETWORK PORT-1-1-1-2 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- auto-diagnostic enabled
-#
#CLI:ACCESS PORT-1-1-1-3 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
admin-state unassigned
service-type epl
@@ -449,18 +519,6 @@
oam-control disabled
oam-local-mode oam-active
back
- alias ""
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- rx-pause disabled
- tx-pause disabled
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
llf
llf-control disabled
llf-trigger-event none
@@ -470,6 +528,9 @@
remote-link-ids none
back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -480,151 +541,6 @@
jdsu-lpbk-control disabled
swap-sada none
back
- cpd-filter cisco-group pass-thru
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
- clb 1
- length 0.10
- description ""
- control disabled
- back
- clb 2
- length 0.10
- description ""
- control disabled
- back
- clb 3
- length 0.10
- description ""
- control disabled
- back
- clb 4
- length 0.10
- description ""
- control disabled
- back
- clb 5
- length 0.10
- description ""
- control disabled
- back
- pm
- set-threshold abrrx 0 15min
- set-threshold abrtx 0 15min
- set-threshold aufd 0 15min
- set-threshold apfd 0 15min
- set-threshold esbf 0 15min
- set-threshold esbp 0 15min
- set-threshold esbs 0 15min
- set-threshold esc 0 15min
- set-threshold escae 37055 15min
- set-threshold esde 37055 15min
- set-threshold esf 37055 15min
- set-threshold esfs 0 15min
- set-threshold esj 0 15min
- set-threshold esmf 0 15min
- set-threshold esmp 0 15min
- set-threshold eso 0 15min
- set-threshold esof 0 15min
- set-threshold esop 37055 15min
- set-threshold esp 0 15min
- set-threshold esp64 0 15min
- set-threshold esp65 0 15min
- set-threshold esp128 0 15min
- set-threshold esp256 0 15min
- set-threshold esp512 0 15min
- set-threshold esp1024 0 15min
- set-threshold esp1519 0 15min
- set-threshold esuf 0 15min
- set-threshold esup 37055 15min
- set-threshold l2cpfd 0 15min
- set-threshold l2cpfp 0 15min
- set-threshold l2ptfe 0 15min
- set-threshold l2ptfd 0 15min
- set-threshold uas 10 15min
- set-threshold abrrx 0 1day
- set-threshold abrtx 0 1day
- set-threshold aufd 0 1day
- set-threshold apfd 0 1day
- set-threshold esbf 0 1day
- set-threshold esbp 0 1day
- set-threshold esbs 0 1day
- set-threshold esc 0 1day
- set-threshold escae 3557280 1day
- set-threshold esde 3557280 1day
- set-threshold esf 3557280 1day
- set-threshold esfs 0 1day
- set-threshold esj 0 1day
- set-threshold esmf 0 1day
- set-threshold esmp 0 1day
- set-threshold eso 0 1day
- set-threshold esof 0 1day
- set-threshold esop 3557280 1day
- set-threshold esp 0 1day
- set-threshold esp64 0 1day
- set-threshold esp65 0 1day
- set-threshold esp128 0 1day
- set-threshold esp256 0 1day
- set-threshold esp512 0 1day
- set-threshold esp1024 0 1day
- set-threshold esp1519 0 1day
- set-threshold esuf 0 1day
- set-threshold esup 3557280 1day
- set-threshold l2cpfd 0 1day
- set-threshold l2cpfp 0 1day
- set-threshold l2ptfe 0 1day
- set-threshold l2ptfd 0 1day
- set-threshold uas 10 1day
-#
-#CLI:ACCESS PORT-1-1-1-4 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- admin-state unassigned
- service-type epl
- speed auto
- port-shaped-speed 0
- port-shaping disabled
- mdix auto
- lpbk
- inner-vlan1-control disabled
- outer-vlan1-control disabled
- inner-vlan2-control disabled
- outer-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan3-control disabled
- back
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
alias ""
auto-diagnostic enabled
mtu 9600
@@ -637,26 +553,17 @@
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 4
- remote-link-ids none
- back
- lpbk
- outer-vlan1 4094-0
- inner-vlan1 4094-0
- outer-vlan2 4094-1
- inner-vlan2 4094-1
- outer-vlan3 4094-2
- inner-vlan3 4094-2
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada none
- back
- cpd-filter cisco-group pass-thru
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -667,7 +574,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -675,40 +581,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -743,6 +679,14 @@
set-threshold l2ptfe 0 15min
set-threshold l2ptfd 0 15min
set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -776,15 +720,23 @@
set-threshold l2ptfe 0 1day
set-threshold l2ptfd 0 1day
set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
#
-#CLI:ACCESS PORT-1-1-1-5 Edit
+#CLI:ACCESS PORT-1-1-1-4 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- admin-state unassigned
- service-type epl
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ admin-state in-service
+ service-type evpl
speed auto
port-shaped-speed 0
port-shaping disabled
@@ -801,28 +753,19 @@
oam-control disabled
oam-local-mode oam-active
back
- alias ""
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- rx-pause disabled
- tx-pause disabled
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
llf
llf-control disabled
llf-trigger-event none
llf-tx-action-type no-action
llf-delay 0
- local-link-id 5
+ local-link-id 4
remote-link-ids none
back
lpbk
- outer-vlan1 0-*
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
inner-vlan2 4094-1
@@ -830,154 +773,9 @@
inner-vlan3 4094-2
lpbk-timer 10
jdsu-lpbk-control disabled
- swap-sada sada
+ swap-sada none
back
- cpd-filter cisco-group pass-thru
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
- clb 1
- length 0.10
- description ""
- control disabled
- back
- clb 2
- length 0.10
- description ""
- control disabled
- back
- clb 3
- length 0.10
- description ""
- control disabled
- back
- clb 4
- length 0.10
- description ""
- control disabled
- back
- clb 5
- length 0.10
- description ""
- control disabled
- back
- pm
- set-threshold abrrx 0 15min
- set-threshold abrtx 0 15min
- set-threshold aufd 0 15min
- set-threshold apfd 0 15min
- set-threshold esbf 0 15min
- set-threshold esbp 0 15min
- set-threshold esbs 0 15min
- set-threshold esc 0 15min
- set-threshold escae 37055 15min
- set-threshold esde 37055 15min
- set-threshold esf 37055 15min
- set-threshold esfs 0 15min
- set-threshold esj 0 15min
- set-threshold esmf 0 15min
- set-threshold esmp 0 15min
- set-threshold eso 0 15min
- set-threshold esof 0 15min
- set-threshold esop 37055 15min
- set-threshold esp 0 15min
- set-threshold esp64 0 15min
- set-threshold esp65 0 15min
- set-threshold esp128 0 15min
- set-threshold esp256 0 15min
- set-threshold esp512 0 15min
- set-threshold esp1024 0 15min
- set-threshold esp1519 0 15min
- set-threshold esuf 0 15min
- set-threshold esup 37055 15min
- set-threshold l2cpfd 0 15min
- set-threshold l2cpfp 0 15min
- set-threshold l2ptfe 0 15min
- set-threshold l2ptfd 0 15min
- set-threshold uas 10 15min
- set-threshold abrrx 0 1day
- set-threshold abrtx 0 1day
- set-threshold aufd 0 1day
- set-threshold apfd 0 1day
- set-threshold esbf 0 1day
- set-threshold esbp 0 1day
- set-threshold esbs 0 1day
- set-threshold esc 0 1day
- set-threshold escae 3557280 1day
- set-threshold esde 3557280 1day
- set-threshold esf 3557280 1day
- set-threshold esfs 0 1day
- set-threshold esj 0 1day
- set-threshold esmf 0 1day
- set-threshold esmp 0 1day
- set-threshold eso 0 1day
- set-threshold esof 0 1day
- set-threshold esop 3557280 1day
- set-threshold esp 0 1day
- set-threshold esp64 0 1day
- set-threshold esp65 0 1day
- set-threshold esp128 0 1day
- set-threshold esp256 0 1day
- set-threshold esp512 0 1day
- set-threshold esp1024 0 1day
- set-threshold esp1519 0 1day
- set-threshold esuf 0 1day
- set-threshold esup 3557280 1day
- set-threshold l2cpfd 0 1day
- set-threshold l2cpfp 0 1day
- set-threshold l2ptfe 0 1day
- set-threshold l2ptfd 0 1day
- set-threshold uas 10 1day
-#
-#CLI:ACCESS PORT-1-1-1-6 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- admin-state in-service
- service-type evpl
- speed auto
- port-shaped-speed 0
- port-shaping disabled
- mdix auto
- lpbk
- inner-vlan1-control disabled
- outer-vlan1-control disabled
- inner-vlan2-control disabled
- outer-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan3-control disabled
- back
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
- alias "STILLWATER-PUBLIC-SCHOOLS-1G-CIR0018861"
+ alias "STILLWATER-PUBLIC-SCHOOLS-1G-CIR0019394"
auto-diagnostic enabled
mtu 9600
afp all-afp
@@ -987,39 +785,25 @@
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- port-vlan-id 6-0
- prio-map-mode 802.1p
+ multicast-rate-limit-ctrl disabled
+ broadcast-rate-limit-ctrl disabled
+ combined-rate-limit-ctrl disabled
+ port-vlan-id 4-0
n2a-vlan-trunking enabled
a2n-push-port-vid enabled
n2a-pop-port-vid disabled
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 6
- remote-link-ids none
- back
- lpbk
- outer-vlan1 4094-0
- inner-vlan1 4094-0
- outer-vlan2 4094-1
- inner-vlan2 4094-1
- outer-vlan3 4094-2
- inner-vlan3 4094-2
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada none
- back
- edit-prio-map prio_map-1-1-1-6-0 0 none 0 0
- edit-prio-map prio_map-1-1-1-6-1 1 none 1 1
- edit-prio-map prio_map-1-1-1-6-2 2 none 2 2
- edit-prio-map prio_map-1-1-1-6-3 3 none 3 3
- edit-prio-map prio_map-1-1-1-6-4 4 none 4 4
- edit-prio-map prio_map-1-1-1-6-5 5 none 5 5
- edit-prio-map prio_map-1-1-1-6-6 6 none 6 6
- edit-prio-map prio_map-1-1-1-6-7 7 none 7 7
- cpd-filter cisco-group pass-thru
+ priority-mapping-profile prio_map_profile-1
+ a2n-swap-priority-vid disabled
+ n2a-swap-priority-vid disabled
+ swap-priority-vid 1
+#
+#CLI:ACCESS CPDV2-1-1-1-4-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1030,7 +814,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1038,40 +821,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -1106,6 +919,14 @@
set-threshold l2ptfe 0 15min
set-threshold l2ptfd 0 15min
set-threshold uas 10 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -1139,18 +960,26 @@
set-threshold l2ptfe 0 1day
set-threshold l2ptfd 0 1day
set-threshold uas 10 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-1
- admin-state maintenance
- media copper auto
+ admin-state in-service
+ auto-diagnostic disabled
+ media fiber auto-1000-full
port-shaped-speed 0
port-shaping disabled
- mdix auto
lpbk
inner-vlan1-control disabled
outer-vlan1-control disabled
@@ -1159,20 +988,24 @@
inner-vlan3-control disabled
outer-vlan3-control disabled
back
- alias ""
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ alias "OneNet Fiber"
mtu 9612
- qinq-ethertype 0x8100
+ qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
lpbk
- outer-vlan1 500-*
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
inner-vlan2 4094-1
@@ -1180,7 +1013,7 @@
inner-vlan3 4094-2
lpbk-timer 10
jdsu-lpbk-control disabled
- swap-sada sada
+ swap-sada none
back
llf
llf-control disabled
@@ -1189,16 +1022,13 @@
llf-delay 0
local-link-id 1
remote-link-ids none
- back
- edit-prio-map network_prio_map-1-1-1-1-0 0 0
- edit-prio-map network_prio_map-1-1-1-1-1 1 1
- edit-prio-map network_prio_map-1-1-1-1-2 2 2
- edit-prio-map network_prio_map-1-1-1-1-3 3 3
- edit-prio-map network_prio_map-1-1-1-1-4 4 4
- edit-prio-map network_prio_map-1-1-1-1-5 5 5
- edit-prio-map network_prio_map-1-1-1-1-6 6 6
- edit-prio-map network_prio_map-1-1-1-1-7 7 7
- cpd-filter cisco-group pass-thru
+#
+#CLI:NETWORK CPDV2-1-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1209,7 +1039,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1217,39 +1046,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -1279,8 +1139,22 @@
set-threshold esup 37055 15min
set-threshold l2cpfd 0 15min
set-threshold l2cpfp 0 15min
+ set-threshold lbc 0 15min
+ set-threshold opr -80 15min
+ set-threshold opr-variance 4 15min
+ set-threshold opt -80 15min
+ set-threshold opt-variance 4 15min
set-threshold psc 0 15min
+ set-threshold temp 0 15min
set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold esbf 0 1day
@@ -1309,16 +1183,30 @@
set-threshold esup 3557280 1day
set-threshold l2cpfd 0 1day
set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
set-threshold psc 0 1day
+ set-threshold temp 0 1day
set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
#
#CLI:NETWORK PORT-1-1-1-2 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-2
- admin-state in-service
+ admin-state unassigned
media copper auto
port-shaped-speed 0
port-shaping disabled
@@ -1331,19 +1219,24 @@
inner-vlan3-control disabled
outer-vlan3-control disabled
back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
alias ""
+ auto-diagnostic enabled
mtu 9612
qinq-ethertype 0x0
+ priority-mapping-profile prio_map_profile-1
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
outer-vlan1 4094-0
inner-vlan1 4094-0
outer-vlan2 4094-1
@@ -1361,16 +1254,13 @@
llf-delay 0
local-link-id 2
remote-link-ids none
- back
- edit-prio-map network_prio_map-1-1-1-2-0 0 0
- edit-prio-map network_prio_map-1-1-1-2-1 1 1
- edit-prio-map network_prio_map-1-1-1-2-2 2 2
- edit-prio-map network_prio_map-1-1-1-2-3 3 3
- edit-prio-map network_prio_map-1-1-1-2-4 4 4
- edit-prio-map network_prio_map-1-1-1-2-5 5 5
- edit-prio-map network_prio_map-1-1-1-2-6 6 6
- edit-prio-map network_prio_map-1-1-1-2-7 7 7
- cpd-filter cisco-group pass-thru
+#
+#CLI:NETWORK CPDV2-1-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1381,7 +1271,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1389,39 +1278,70 @@
cpd-filter efm-oam discard
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
clb 1
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
clb 2
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
clb 3
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
clb 4
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
clb 5
length 0.10
description ""
control disabled
- back
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -1453,6 +1373,14 @@
set-threshold l2cpfp 0 15min
set-threshold psc 0 15min
set-threshold uas 10 15min
+ set-threshold pbbunibdadiscard 0 15min
+ set-threshold pbbgrpbdadiscard 0 15min
+ set-threshold ibrmaxrx 0 15min
+ set-threshold ibrmaxtx 0 15min
+ set-threshold ibrminrx 0 15min
+ set-threshold ibrmintx 0 15min
+ set-threshold ibrrx 0 15min
+ set-threshold ibrtx 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold esbf 0 1day
@@ -1483,7 +1411,67 @@
set-threshold l2cpfp 0 1day
set-threshold psc 0 1day
set-threshold uas 10 1day
+ set-threshold pbbunibdadiscard 0 1day
+ set-threshold pbbgrpbdadiscard 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
#
+#CLI:ELMI ACCESS-1-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI ACCESS-1-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
+ configure network-port network-1-1-1-2
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
#CLI:ECPA CONFIG-1 Edit
#
home
@@ -1491,7 +1479,7 @@
ecpa-streams 1
stream-name "stream-1"
framesize 64
- rate 464576000
+ rate 10048000
payload-type fixed
dest-mac 00:80:ea:00:00:01
outer-vlan-control disabled
@@ -1806,15 +1794,15 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
ecpa-ctrl
- src-port access-1-1-1-5
+ src-port access-1-1-1-3
inject-direction a2n
monitor-direction n2a
test-type duration
- test-duration 00:00:01:00
+ test-duration 00:00:00:10
test-num-frames 1
- test-stream-a 1
+ test-stream-a 0
test-stream-b 0
test-stream-c 0
#
@@ -1822,29 +1810,38 @@
#
home
configure communication
- add mgmttnl 1 "LTP" ethernet mac-based network-1-1-1-1 ipv4-only enabled 256000 768000
+ add mgmttunnel 1 "MGMT" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
configure mgmttnl mgmt_tnl-1
- dhcp-control enabled
+ dhcp-control disabled 10.199.192.98 255.255.255.252
+ back
+ configure mgmttnl mgmt_tnl-1
buffer-size 32
- dhcp-client-id-control disabled
+ cos 7
+ back
+ configure mgmttnl mgmt_tnl-1
+ rip2Pkts-control disabled
+ dhcp-client-id-control enabled
dhcp-class-id-control enabled
dhcp-host-name-control enabled
dhcp-log-server-control disabled
dhcp-ntp-server-control disabled
+ dhcp-client-id-type mac-addr
dhcp-host-name-type system-name
#
-#CLI:MANAGEMENT TUNNEL-2 Create
+#CLI:IP SYSTEM Edit
#
home
configure communication
- add mgmttnl 2 "Loop" ethernet vlan-based network-1-1-1-2 80 ipv4-only disabled 10.199.192.98 255.255.255.252 256000 768000
- configure mgmttnl mgmt_tnl-2
- cvlan-control enabled
- svlan-control disabled
- svlan-id 4095
- buffer-size 32
- cos 7
- rip2Pkts-control disabled
+ configure eth0 ip-mode ipv4-only
+ configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+ configure eth0 dhcp-role dhcp-client
+ configure eth0 dhcp-client-id-type mac-addr
+ configure eth0 dhcp-class-id-control enabled
+ configure eth0 dhcp-host-name-control enabled
+ configure eth0 dhcp-host-name-type system-name
+ configure eth0 dhcp-log-server-control disabled
+ configure eth0 dhcp-ntp-server-control disabled
+ configure eth0 rip2Pkts-control disabled
#
#CLI:IP SOURCE ADDR CONFIG Edit
#
@@ -1852,45 +1849,26 @@
configure communication
configure src-addr out-ip-intf-addr "eth0"
#
-#CLI:IP SYSTEM Edit
-#
-home
-configure communication
- configure eth0 ip-mode ipv4-only
- configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
- configure eth0 dhcp-role dhcp-client
- configure eth0 rip2Pkts-control disabled
-#
#CLI:FLOW-1-1-1-3-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
itag none
circuit-name ""
es-frame-loss-threshold 1
ses-frame-loss-threshold-ratio 30
+ network-interface network-1-1-1-1 push 3-0 none
a2n-shaping-type flow-based
policing enabled
policing-control a2n-n2a
- stag none
net-to-acc-rate-limiting disabled
default-cos 0
- ctag push 3-0
+ priority-mapping-profile none
pbb-frames disabled
- access-interface access-1-1-1-3 network-interface network-1-1-1-1
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -1901,7 +1879,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -1909,14 +1886,30 @@
cpd-filter efm-oam pass-thru
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -1927,7 +1920,6 @@
set-threshold bytesinn2a 0 15min
set-threshold bytesouta2n 0 15min
set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
set-threshold fmga2n 0 15min
set-threshold fmgn2a 0 15min
set-threshold fmrda2n 0 15min
@@ -1937,6 +1929,22 @@
set-threshold ftda2n 0 15min
set-threshold ses 0 15min
set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -1946,7 +1954,6 @@
set-threshold bytesinn2a 0 1day
set-threshold bytesouta2n 0 1day
set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
set-threshold fmga2n 0 1day
set-threshold fmgn2a 0 1day
set-threshold fmrda2n 0 1day
@@ -1956,40 +1963,70 @@
set-threshold ftda2n 0 1day
set-threshold ses 0 1day
set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
- configure n2a-shaper port_n2a_shaper-1-1-1-3-0
- buffersize 10
+ configure flow flow-1-1-1-3-1
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
#
#CLI:A2N POLICER-1-1-1-3-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
configure a2n-policer a2n_policer-1-1-1-3-1-0
eir 0
ebs 0
+ cir 0
+ cbs 0
color-marking enabled
color-mode color-aware
coupling-flag enabled
- cbs 0
- cir 0
back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- configure flow flow-1-1-1-3-1
configure a2n-policer a2n_policer-1-1-1-3-1-0
pm
set-threshold fmg 0 15min
@@ -2009,7 +2046,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
configure n2a-policer n2a_policer-1-1-1-3-1-0
@@ -2027,36 +2064,48 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
-#CLI:FLOW-1-1-1-4-1 Edit
+#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-3
+ configure n2a-shaper port_n2a_shaper-1-1-1-3-0
+ buffersize 0
+ soam-cir 0
+ soam-eir 0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:FLOW-1-1-1-4-1 Create
+#
+home
+network-element ne-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-4
+ add flow flow-1-1-1-4-1 "" regular-evc disabled disabled disabled disabled 0 disabled none none "810-*" 0 1000000000 access-interface access-1-1-1-4 network-interface network-1-1-1-1 flow-based disabled none
configure flow flow-1-1-1-4-1
- itag none
- circuit-name ""
+ admin-state in-service
es-frame-loss-threshold 1
ses-frame-loss-threshold-ratio 30
- a2n-shaping-type flow-based
policing enabled
policing-control a2n-n2a
- stag none
- net-to-acc-rate-limiting disabled
- default-cos 0
- ctag push 4-0
- pbb-frames disabled
- access-interface access-1-1-1-4 network-interface network-1-1-1-1
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
+ n2a-outertag-prio-ctrl disabled
+ priority-mapping-profile none
n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -2067,7 +2116,6 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
cpd-filter bpdu pass-thru
cpd-filter pause pass-thru
cpd-filter lacp pass-thru
@@ -2075,14 +2123,30 @@
cpd-filter efm-oam pass-thru
cpd-filter ssm discard
cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ cpd-filter elmi pass-thru
+ cpd-filter 01-80-c2-00-00-00 discard
+ cpd-filter 01-80-c2-00-00-01 discard
+ cpd-filter 01-80-c2-00-00-02 discard
+ cpd-filter 01-80-c2-00-00-03 discard
+ cpd-filter 01-80-c2-00-00-04 discard
+ cpd-filter 01-80-c2-00-00-05 discard
+ cpd-filter 01-80-c2-00-00-06 discard
+ cpd-filter 01-80-c2-00-00-07 discard
+ cpd-filter 01-80-c2-00-00-08 discard
+ cpd-filter 01-80-c2-00-00-09 discard
+ cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-0b discard
+ cpd-filter 01-80-c2-00-00-0c discard
+ cpd-filter 01-80-c2-00-00-0d discard
+ cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0f discard
+ cpd-filter nearest-lldp discard
+ cpd-filter non-tpmr-lldp discard
+ cpd-filter customer-lldp discard
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -2093,7 +2157,6 @@
set-threshold bytesinn2a 0 15min
set-threshold bytesouta2n 0 15min
set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
set-threshold fmga2n 0 15min
set-threshold fmgn2a 0 15min
set-threshold fmrda2n 0 15min
@@ -2103,6 +2166,22 @@
set-threshold ftda2n 0 15min
set-threshold ses 0 15min
set-threshold uas 10 15min
+ set-threshold fdhairpin 0 15min
+ set-threshold fdstaticblock 0 15min
+ set-threshold learntblentrydiscards 0 15min
+ set-threshold numlearntblflushes 0 15min
+ set-threshold ibra2nmax 0 15min
+ set-threshold ibrrla2nmax 0 15min
+ set-threshold ibra2nmin 0 15min
+ set-threshold ibrrla2nmin 0 15min
+ set-threshold ibra2n 0 15min
+ set-threshold ibrrla2n 0 15min
+ set-threshold ibrn2amax 0 15min
+ set-threshold ibrrln2amax 0 15min
+ set-threshold ibrn2amin 0 15min
+ set-threshold ibrrln2amin 0 15min
+ set-threshold ibrn2a 0 15min
+ set-threshold ibrrln2a 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -2112,7 +2191,6 @@
set-threshold bytesinn2a 0 1day
set-threshold bytesouta2n 0 1day
set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
set-threshold fmga2n 0 1day
set-threshold fmgn2a 0 1day
set-threshold fmrda2n 0 1day
@@ -2122,40 +2200,70 @@
set-threshold ftda2n 0 1day
set-threshold ses 0 1day
set-threshold uas 10 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
+#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-4
- configure n2a-shaper port_n2a_shaper-1-1-1-4-0
- buffersize 10
+ configure flow flow-1-1-1-4-1
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ buffersize 128
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+ pm
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
#
#CLI:A2N POLICER-1-1-1-4-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-4
configure flow flow-1-1-1-4-1
configure a2n-policer a2n_policer-1-1-1-4-1-0
- eir 0
- ebs 0
+ eir 1000000000
+ ebs 1024
+ cir 0
+ cbs 0
color-marking enabled
color-mode color-aware
coupling-flag enabled
- cbs 0
- cir 0
back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- configure flow flow-1-1-1-4-1
configure a2n-policer a2n_policer-1-1-1-4-1-0
pm
set-threshold fmg 0 15min
@@ -2175,7 +2283,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-4
configure flow flow-1-1-1-4-1
configure n2a-policer n2a_policer-1-1-1-4-1-0
@@ -2193,337 +2301,37 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
-#CLI:FLOW-1-1-1-5-1 Edit
+#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- itag none
- circuit-name ""
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- a2n-shaping-type flow-based
- policing enabled
- policing-control a2n-n2a
- stag none
- net-to-acc-rate-limiting disabled
- default-cos 0
- ctag push 5-0
- pbb-frames disabled
- access-interface access-1-1-1-5 network-interface network-1-1-1-2
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
- n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
- pm
- set-threshold abra2n 0 15min
- set-threshold abrrla2n 0 15min
- set-threshold abrn2a 0 15min
- set-threshold abrrln2a 0 15min
- set-threshold l2cpfd 0 15min
- set-threshold bytesina2n 0 15min
- set-threshold bytesinn2a 0 15min
- set-threshold bytesouta2n 0 15min
- set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
- set-threshold fmga2n 0 15min
- set-threshold fmgn2a 0 15min
- set-threshold fmrda2n 0 15min
- set-threshold fmrdn2a 0 15min
- set-threshold fmya2n 0 15min
- set-threshold fmyn2a 0 15min
- set-threshold ftda2n 0 15min
- set-threshold ses 0 15min
- set-threshold uas 10 15min
- set-threshold abra2n 0 1day
- set-threshold abrrla2n 0 1day
- set-threshold abrn2a 0 1day
- set-threshold abrrln2a 0 1day
- set-threshold l2cpfd 0 1day
- set-threshold bytesina2n 0 1day
- set-threshold bytesinn2a 0 1day
- set-threshold bytesouta2n 0 1day
- set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
- set-threshold fmga2n 0 1day
- set-threshold fmgn2a 0 1day
- set-threshold fmrda2n 0 1day
- set-threshold fmrdn2a 0 1day
- set-threshold fmya2n 0 1day
- set-threshold fmyn2a 0 1day
- set-threshold ftda2n 0 1day
- set-threshold ses 0 1day
- set-threshold uas 10 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-5-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure n2a-shaper port_n2a_shaper-1-1-1-5-0
+ configure nte nte112-1-1-1
+ configure access-port access-1-1-1-4
+ configure n2a-shaper port_n2a_shaper-1-1-1-4-0
buffersize 10
-#
-#CLI:A2N POLICER-1-1-1-5-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure a2n-policer a2n_policer-1-1-1-5-1-0
- eir 0
- ebs 0
- color-marking enabled
- color-mode color-aware
- coupling-flag enabled
- cbs 0
- cir 0
- back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure a2n-policer a2n_policer-1-1-1-5-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:N2A POLICER-1-1-1-5-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure n2a-policer n2a_policer-1-1-1-5-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:FLOW-1-1-1-6-1 Create
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- add flow flow-1-1-1-6-1 "" regular-evc disabled disabled disabled disabled 0 disabled none none "810-*" 0 1000000000 flow-based disabled none network-1-1-1-2 access-interface access-1-1-1-6
- configure flow flow-1-1-1-6-1
- admin-state in-service
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- policing enabled
- policing-control a2n-n2a
- n2a-outertag-prio-ctrl disabled
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
- n2n-forwarding disabled
- cpd-filter cisco-group pass-thru
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bridge-group pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter bridge-reserved pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter garp-group pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter lldp pass-thru
+ soam-cir 0
+ soam-eir 0
pm
- set-threshold abra2n 0 15min
- set-threshold abrrla2n 0 15min
- set-threshold abrn2a 0 15min
- set-threshold abrrln2a 0 15min
- set-threshold l2cpfd 0 15min
- set-threshold bytesina2n 0 15min
- set-threshold bytesinn2a 0 15min
- set-threshold bytesouta2n 0 15min
- set-threshold bytesoutn2a 0 15min
- set-threshold es 0 15min
- set-threshold fmga2n 0 15min
- set-threshold fmgn2a 0 15min
- set-threshold fmrda2n 0 15min
- set-threshold fmrdn2a 0 15min
- set-threshold fmya2n 0 15min
- set-threshold fmyn2a 0 15min
- set-threshold ftda2n 0 15min
- set-threshold ses 0 15min
- set-threshold uas 10 15min
- set-threshold abra2n 0 1day
- set-threshold abrrla2n 0 1day
- set-threshold abrn2a 0 1day
- set-threshold abrrln2a 0 1day
- set-threshold l2cpfd 0 1day
- set-threshold bytesina2n 0 1day
- set-threshold bytesinn2a 0 1day
- set-threshold bytesouta2n 0 1day
- set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
- set-threshold fmga2n 0 1day
- set-threshold fmgn2a 0 1day
- set-threshold fmrda2n 0 1day
- set-threshold fmrdn2a 0 1day
- set-threshold fmya2n 0 1day
- set-threshold fmyn2a 0 1day
- set-threshold ftda2n 0 1day
- set-threshold ses 0 1day
- set-threshold uas 10 1day
+ set-threshold bt 0 15min
+ set-threshold btd 0 15min
+ set-threshold fd 0 15min
+ set-threshold ftd 0 15min
+ set-threshold abrrl 0 15min
+ set-threshold bredd 0 15min
+ set-threshold fredd 0 15min
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-6-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure n2a-shaper port_n2a_shaper-1-1-1-6-0
- buffersize 10
-#
-#CLI:A2N POLICER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure a2n-policer a2n_policer-1-1-1-6-1-0
- eir 1000000000
- ebs 1024
- color-marking enabled
- color-mode color-aware
- coupling-flag enabled
- cbs 0
- cir 0
- back
- back
- back
- back
- back
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure a2n-policer a2n_policer-1-1-1-6-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:N2A POLICER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure n2a-policer n2a_policer-1-1-1-6-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-1
lpbk
rls-lpbk
@@ -2532,7 +2340,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-2
lpbk
rls-lpbk
@@ -2541,9 +2349,6 @@
#
home
configure cfm
- slm-multicast-mac 01:80:c2:00:00:30
- slm-op-code 53
- slr-op-code 52
signal-fail-defect-list rdi,rem-ccm
#
#CLI:CFM SYSDEF MDLVL-1 Edit
@@ -2554,195 +2359,22 @@
md-level 0
mhf none
#
-#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#CLI:MOBILE MODEM-1-1-1-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- configure n2a-shaper port_n2a_shaper-1-1-1-3-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- configure n2a-shaper port_n2a_shaper-1-1-1-4-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-5-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure n2a-shaper port_n2a_shaper-1-1-1-5-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-6-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure n2a-shaper port_n2a_shaper-1-1-1-6-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- configure flow flow-1-1-1-3-1
- configure a2n-shaper a2n_shaper-1-1-1-3-1-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- configure flow flow-1-1-1-4-1
- configure a2n-shaper a2n_shaper-1-1-1-4-1-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-5-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure a2n-shaper a2n_shaper-1-1-1-5-1-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure a2n-shaper a2n_shaper-1-1-1-6-1-0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
-#
-#CLI:USB DCN-1-1-1-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure usb
- alias ""
- apn ""
- dial-number ""
- redial-timer 10
+ add mobile-modem
+ back
+ configure usb
+ configure mobile-modem
+ admin-state unassigned
+ alias ""
+ apn ""
+ dial-number ""
+ redial-timer 10
#
-#CLI:IP SYSTEM Create
-#
-home
-configure communication
- add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.97 "Loop" 1 disabled
-#
#CLI:SYSTEM FEATURE-1 Edit
#
home
@@ -2767,7 +2399,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-3
lldp
add acc-port-config 1
@@ -2782,7 +2414,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure access-port access-1-1-1-4
lldp
add acc-port-config 1
@@ -2793,41 +2425,11 @@
snmp-notification disabled
basic-tlv-supported port-description,sys-name,sys-description,sys-cap
#
-#CLI:LLDP ACC PORT CONFIG-1-1-1-5-1 Create
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- lldp
- add acc-port-config 1
- back
- lldp
- configure acc-port-config 1
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
-#CLI:LLDP ACC PORT CONFIG-1-1-1-6-1 Create
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- lldp
- add acc-port-config 1
- back
- lldp
- configure acc-port-config 1
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-1
lldp
add net-port-config 1
@@ -2842,7 +2444,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112-1-1-1
configure network-port network-1-1-1-2
lldp
add net-port-config 1
@@ -2853,26 +2455,40 @@
snmp-notification disabled
basic-tlv-supported port-description,sys-name,sys-description,sys-cap
#
-#CLI:SAT CONTROL-1-1 Create
+#CLI:SAT CONTROL-1-1 Edit
#
home
configure sat
network-element ne-1
- add sat-ctrl sat_control-1-1 "" one-way cir,eir,policing,performance 1 20 20 15
+ configure sat-ctrl sat_control-1-1
+ name ""
+ test-mode one-way
+ test-procedure cir,eir,policing,performance
+ test-duration 20
+ step-duration 20
+ step-num 1
+ perf-test-duration 15
+ flpdu-tag-override disabled
+#
+#CLI:IP SYSTEM Create
+#
+home
+configure communication
+ add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.97 "MGMT" 1 disabled
#end
home
admin config-file
# NetworkElement
# ADVA-NE-1--> show slot-info 1
# Slot Type : generic-slot
-# Card Type : nte114
-# Physical Entity Name : FSP150CC-GE114
-# MAC Address : 00:80:ea:6d:c2:f0
-# Software Revision : 6.3.1-106
-# Firmware Revision : 72353
+# Card Type : nte112
+# Physical Entity Name : FSP150CC-GE112
+# MAC Address : 00:80:ea:73:cd:90
+# Software Revision : 8.1.1-164
+# Firmware Revision : 87458l
# Hardware Revision : 1.01
-# USI : LBADVA71152600197
+# USI : LBADVA71153607686
# CLEI Code : Pending
-# Part Number : 1078904620-01
-# Manufacturer Date : 2015-06-25
+# Part Number : 1078904600-01
+# Manufacturer Date : 2015-09-14
# Manufacturer Site : Shenzhen
More information about the Nocrancid
mailing list