[Nocrancid] autopop-onenet.net router config diffs

rancid at rancid.noc.onenet.net rancid at rancid.noc.onenet.net
Thu Jan 7 18:02:45 CST 2016


Index: router.db
===================================================================
--- router.db	(revision 138624)
+++ router.db	(working copy)
@@ -317,6 +317,7 @@
 ore5.okc.onenet.net:cisco:down
 ore6.okc.onenet.net:cisco:down
 panola-ps.client.onenet.net:juniper:up
+piedmont-ps-ge112.nid.onenet.net:fsp150:up
 pioneer-tech-ash-srx220-mr.client.onenet.net:juniper:up
 pioneer-tech-ponc-srx220.client.onenet.net:juniper:up
 porum-ps.client.onenet.net:juniper:up
Index: routers.up
===================================================================
--- routers.up	(revision 138619)
+++ routers.up	(working copy)
@@ -240,6 +240,7 @@
 opt4.okc.onenet.net:ons15454
 opt4.tul.onenet.net:ons15454
 panola-ps.client.onenet.net:juniper
+piedmont-ps-ge112.nid.onenet.net:fsp150
 pioneer-tech-ash-srx220-mr.client.onenet.net:juniper
 pioneer-tech-ponc-srx220.client.onenet.net:juniper
 porum-ps.client.onenet.net:juniper
Index: configs/allen-public-library.client.onenet.net
===================================================================
--- configs/allen-public-library.client.onenet.net	(revision 138621)
+++ configs/allen-public-library.client.onenet.net	(working copy)
@@ -141,8 +141,8 @@
 #ge-0/0/4.0 up up
 #ge-0/0/5 up up
 #ge-0/0/5.0 up up
-#ge-0/0/6 up up
-#ge-0/0/6.0 up up
+#ge-0/0/6 up down
+#ge-0/0/6.0 up down
 #ge-0/0/7 up down
 #ge-0/0/7.0 up down
 #ge-0/0/8 up up
Index: configs/maysville-es.client.onenet.net
===================================================================
--- configs/maysville-es.client.onenet.net	(revision 138623)
+++ configs/maysville-es.client.onenet.net	(working copy)
@@ -16,6 +16,7 @@
 #       SRX240 CPU fan 1               OK
 #       SRX240 CPU fan 2               OK
 #       SRX240 IO  fan 1               OK
+# show chassis firmware
 #       SRX240 IO  fan 2               OK
 # Power Power Supply 0                 OK        
 # 
@@ -44,10 +45,8 @@
 #     Serial ID                      ACDT6307
 # 
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show chassis scb 
-# show chassis sfm detail
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show chassis sfm detail
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show chassis ssb 
-# show system boot-messages
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show system boot-messages 
 # kld_map_v: 0x8ff80000, kld_map_p: 0x0
 # Copyright (c) 1996-2014, Juniper Networks, Inc.
@@ -111,11 +110,10 @@
 # Trying to mount root from ufs:/dev/da0s1a
 # 
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show version 
-# Hostname: MAYSVILLE-ES-LEASED-ASSET-TAG-004945 # Model: srx240h2 # JUNOS Software Release [12.1X44-D35.5] # file list /var/tmp detail #  # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> file list /var/tmp detail # lrw-r--r--  1 root  wheel         11 May 19  2014 /var/tmp@ -> /cf/var/tmp
+# Hostname: MAYSVILLE-ES-LEASED-ASSET-TAG-004945 # Model: srx240h2 # JUNOS Software Release [12.1X44-D35.5] #  # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> file list /var/tmp detail # lrw-r--r--  1 root  wheel         11 May 19  2014 /var/tmp@ -> /cf/var/tmp
 # total files: 1
 # 
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show system uptime 
-# show interface terse
 # System booted: 2016-01-07 00:16 CST 
 # Protocols started: 2016-01-07 00:19 CST 
 # Last configured: 2015-10-26 13:12 CDT  by admin
@@ -171,7 +169,6 @@
 #vlan up up
 #vlan.999 up down
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show configuration 
-show ospf neighbor
 ## Last commit: 2015-10-26 13:12:04 CDT by admin
 version 12.1X44-D35.5;
 system {
@@ -617,7 +614,6 @@
 # OSPF instance is not running
 # 
 # grnoc-mon at MAYSVILLE-ES-LEASED-ASSET-TAG-004945> show bfd session 
-quit
 
 0 sessions, 0 clients
 Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/core.mca.onenet.net
===================================================================
--- configs/core.mca.onenet.net	(revision 138615)
+++ configs/core.mca.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at MCALESTER-MX480-RE0> show system commit 
+#   2016-01-07 17:54:14 CST by rnordmark via cli commit synchronize
+#   2016-01-07 17:53:46 CST by rnordmark via cli commit confirmed, rollback in 2mins synchronize
 #   2016-01-05 00:26:28 CST by andrew via cli commit synchronize
 #   2016-01-05 00:11:08 CST by andrew via cli commit synchronize
 #   2016-01-05 00:03:39 CST by andrew via cli commit synchronize
 #   2016-01-05 00:02:43 CST by andrew via cli commit confirmed, rollback in 3mins synchronize
-#   2016-01-04 23:58:32 CST by andrew via cli commit confirmed, rollback in 3mins synchronize
-#   2016-01-04 16:23:55 CST by andrew via cli commit synchronize
 # grnoc-mon at MCALESTER-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -263,7 +263,7 @@
 # grnoc-mon at MCALESTER-MX480-RE0> show system uptime 
 # System booted: 2015-06-07 22:55 CDT 
 # Protocols started: 2015-06-07 22:57 CDT 
-# Last configured: 2016-01-05 00:26 CST  by andrew
+# Last configured: 2016-01-07 17:54 CST  by rnordmark
 # 
 # {master}
 # grnoc-mon at MCALESTER-MX480-RE0> show interface terse 
@@ -407,7 +407,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at MCALESTER-MX480-RE0> show configuration 
-## Last commit: 2016-01-05 00:26:28 CST by andrew
+## Last commit: 2016-01-07 17:54:14 CST by rnordmark
 version 13.3R6.5;
 groups {
     re0 {
Index: configs/eodls-muldrow-public-library.client.onenet.net
===================================================================
--- configs/eodls-muldrow-public-library.client.onenet.net	(revision 138623)
+++ configs/eodls-muldrow-public-library.client.onenet.net	(working copy)
@@ -1,7 +1,6 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at EODLS-Muldrow-Public-Library-ASSET-004357> show system commit 
-# show chassis firmware
 #   2015-12-08 13:07:30 CST by joel via cli
 #   2015-12-08 12:55:35 CST by onenet via cli commit confirmed, rollback in 5mins
 #   2015-03-23 13:43:08 CDT by root via other
Index: configs/core3.okc-m120.onenet.net
===================================================================
--- configs/core3.okc-m120.onenet.net	(revision 138621)
+++ configs/core3.okc-m120.onenet.net	(working copy)
@@ -960,12 +960,12 @@
 #t1-2/3/0:12:22.0 up up
 #t1-2/3/0:12:23 up up
 #t1-2/3/0:12:23.0 up up
-#t1-2/3/0:12:24 up down
-#t1-2/3/0:12:24.16 up down
-#t1-2/3/0:12:24.17 up down
-#t1-2/3/0:12:24.18 up down
-#t1-2/3/0:12:25 up down
-#t1-2/3/0:12:25.16 up down
+#t1-2/3/0:12:24 up up
+#t1-2/3/0:12:24.16 up up
+#t1-2/3/0:12:24.17 up up
+#t1-2/3/0:12:24.18 up up
+#t1-2/3/0:12:25 up up
+#t1-2/3/0:12:25.16 up up
 #t1-2/3/0:12:26 up up
 #t1-2/3/0:12:26.16 up up
 #t1-2/3/0:12:26.17 up up
Index: configs/rpswi2.rp1f3.onenet.net
===================================================================
--- configs/rpswi2.rp1f3.onenet.net	(revision 138623)
+++ configs/rpswi2.rp1f3.onenet.net	(working copy)
@@ -578,8 +578,8 @@
 #ge-1/0/37.0 up down
 #ge-1/0/38 up down
 #ge-1/0/38.0 up down
-#ge-1/0/39 up up
-#ge-1/0/39.0 up up
+#ge-1/0/39 up down
+#ge-1/0/39.0 up down
 #ge-1/0/40 up down
 #ge-1/0/40.0 up down
 #ge-1/0/41 up down
@@ -600,8 +600,8 @@
 #ge-2/0/0.0 up down
 #ge-2/0/1 up up
 #ge-2/0/1.0 up up
-#ge-2/0/2 up up
-#ge-2/0/2.0 up up
+#ge-2/0/2 up down
+#ge-2/0/2.0 up down
 #ge-2/0/3 up down
 #ge-2/0/3.0 up down
 #ge-2/0/4 up down
@@ -642,8 +642,8 @@
 #ge-2/0/21.0 up up
 #ge-2/0/22 up down
 #ge-2/0/22.0 up down
-#ge-2/0/23 up up
-#ge-2/0/23.0 up up
+#ge-2/0/23 up down
+#ge-2/0/23.0 up down
 #ge-2/0/24 up up
 #ge-2/0/24.0 up up
 #ge-2/0/25 up up
Index: configs/hub.chi.onenet.net
===================================================================
--- configs/hub.chi.onenet.net	(revision 138623)
+++ configs/hub.chi.onenet.net	(working copy)
@@ -294,7 +294,7 @@
 #t1-2/0/2:1 up up
 #t1-2/0/2:1.16 up up
 #t1-2/0/2:1.17 up up
-#t1-2/0/2:2 down up
+#t1-2/0/2:2 down down
 #t1-2/0/2:3 down down
 #t1-2/0/2:4 down down
 #t1-2/0/2:5 down down
Index: configs/acx.cai.hart-acx2100.onenet.net
===================================================================
--- configs/acx.cai.hart-acx2100.onenet.net	(revision 138623)
+++ configs/acx.cai.hart-acx2100.onenet.net	(working copy)
@@ -73,7 +73,6 @@
 # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> show chassis sfm detail 
 # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> show chassis ssb 
 # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> show system boot-messages 
-# show version
 # platform_early_bootinit: MX-PPC Series Early Boot Initialization
 # mxppc_set_re_type: hw.board.type is ACX-2100
 # WDOG initialized
@@ -142,8 +141,7 @@
 # WARNING: /var was not properly dismounted
 # 
 # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> show version 
-# Hostname: HARTSHORNE-PUBLIC-LIBRARY-ACX2100 # Model: acx2100 # JUNOS Crypto Software Suite [12.3X54-D10.6] # JUNOS Base OS Software Suite [12.3X54-D10.6] # JUNOS Kernel Software Suite [12.3X54-D10.6] # JUNOS Base OS boot [12.3X54-D10.6] # JUNOS Packet Forwarding Engine Support (ACX) [12.3X54-D10.6] # JUNOS Online Documentation [12.3X54-D10.6] # JUNOS Routing Software Suite [12.3X54-D10.6] #  # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> file list /var/tmp detail # show system uptime
-# 
+# Hostname: HARTSHORNE-PUBLIC-LIBRARY-ACX2100 # Model: acx2100 # JUNOS Crypto Software Suite [12.3X54-D10.6] # JUNOS Base OS Software Suite [12.3X54-D10.6] # JUNOS Kernel Software Suite [12.3X54-D10.6] # JUNOS Base OS boot [12.3X54-D10.6] # JUNOS Packet Forwarding Engine Support (ACX) [12.3X54-D10.6] # JUNOS Online Documentation [12.3X54-D10.6] # JUNOS Routing Software Suite [12.3X54-D10.6] #  # grnoc-mon at HARTSHORNE-PUBLIC-LIBRARY-ACX2100> file list /var/tmp detail # 
 # /var/tmp:
 # total blocks: 291872
 # drwxr-xr-x  2 root  field        512 Dec 31  2009 gres-tp/
Index: configs/piedmont-ps-ge112.nid.onenet.net
===================================================================
--- configs/piedmont-ps-ge112.nid.onenet.net	(revision 138625)
+++ configs/piedmont-ps-ge112.nid.onenet.net	(working copy)
@@ -0,0 +1,2329 @@
+# RANCID-CONTENT-TYPE: fsp150
+#
+# ADVA--> show running-config current
+Preparing configuration file...
+#
+#CLI:SUBNETWORK  Edit
+#
+home
+configure system
+  prompt "ADVA"
+#
+#CLI:MANAGEMENT TUNNEL-1  Delete
+#
+home
+configure communication
+  delete mgmttnl mgmt_tnl-1
+#
+#CLI:SYSTEM  Edit
+#
+home
+configure system
+  ntp-server-method user-defined
+  log-server-method user-defined
+  system-tod-type ntp
+  auth-traps disabled
+  serial enabled
+  serial-disconnect-logoff enabled
+  http enabled
+  https enabled
+  telnet disabled
+  scp enabled
+  sftp enabled
+  security-banner "This is a private system. Unauthorized access or use may lead to prosecution."
+  security-prompt disabled
+  ssh enabled
+  snmp-engine-id "800009f0030080ea73cda0"
+  utc-leap-offset disabled
+  time-zone
+    dst-control enabled
+    utc-offset "-06:00"
+    dst-utc-offset "+01:00"
+    dst-start-month march
+    dst-end-month november
+    dst-start-day "SUNDAY>=7"
+    dst-end-day "SUNDAY<=8"
+    dst-start-time "02:00"
+    dst-end-time "02:00"
+    back
+  ftp disabled
+  ntp-client
+    primary-server ipv4 164.58.3.98
+    backup-server 164.58.29.14
+    control enabled
+    polling-interval 16
+    back
+  proxy-arp disabled
+  mgmt-traffic-bridge disabled
+  mgmt-traffic-bridge-security disabled
+  proxy-ndp disabled
+  ipv6-fwd disabled
+  alarm-attributes system prim-ntp-svr-fail nsa mn
+  alarm-attributes system bkup-ntp-svr-fail nsa mn
+  alarm-attributes system swdl-filetransfer-ip nsa nr
+  alarm-attributes system swdl-install-ip nsa nr
+  alarm-attributes system swdl-activation-ip nsa nr
+  alarm-attributes system swdl-validation-ip nsa nr
+  alarm-attributes system db-filetransfer-ip nsa nr
+  alarm-attributes system snmp-dg-host-unreachable nsa mn
+  alarm-attributes system snmp-dg-res-busy nsa mn
+  alarm-attributes system ip-address-conflict sa cr
+  alarm-attributes system db-downgrade nsa nr
+  alarm-attributes system filetransfer-ip nsa nr
+  alarm-attributes system operation-ip nsa nr
+  alarm-attributes system ltp-fail sa mj
+  alarm-attributes system ltp-in-progress nsa na
+  alarm-attributes system ipv6-address-conflict sa cr
+  alarm-attributes access-port farend-duplex-unknown nsa mn
+  alarm-attributes access-port farend-duplex-unknown sa mj
+  alarm-attributes access-port efm-oam-dying-gasp nsa mn
+  alarm-attributes access-port efm-oam-dying-gasp sa cr
+  alarm-attributes access-port efm-fail nsa mn
+  alarm-attributes access-port efm-fail sa mn
+  alarm-attributes access-port efm-rce nsa mn
+  alarm-attributes access-port efm-rce sa mn
+  alarm-attributes access-port efm-rld nsa mn
+  alarm-attributes access-port efm-rld sa mn
+  alarm-attributes access-port efm-rls nsa mn
+  alarm-attributes access-port efm-rls sa mn
+  alarm-attributes access-port lnkdn-deact nsa mn
+  alarm-attributes access-port lnkdn-deact sa cr
+  alarm-attributes access-port lnkdn-unisolated nsa mn
+  alarm-attributes access-port lnkdn-unisolated sa cr
+  alarm-attributes access-port lnkdn-cbl-flt nsa mn
+  alarm-attributes access-port lnkdn-cbl-flt sa cr
+  alarm-attributes access-port lnkdn-cbl-rmvd nsa mn
+  alarm-attributes access-port lnkdn-cbl-rmvd sa cr
+  alarm-attributes access-port lnkdn-autoneg-failed nsa mn
+  alarm-attributes access-port lnkdn-autoneg-failed sa cr
+  alarm-attributes access-port lnkdn nsa mn
+  alarm-attributes access-port lnkdn sa cr
+  alarm-attributes access-port rfi nsa mn
+  alarm-attributes access-port rfi sa mn
+  alarm-attributes access-port rx-jabber nsa mn
+  alarm-attributes access-port rx-jabber sa mj
+  alarm-attributes access-port sfp-mismatch nsa mn
+  alarm-attributes access-port sfp-mismatch sa cr
+  alarm-attributes access-port sfp-rmvd nsa mn
+  alarm-attributes access-port sfp-rmvd sa cr
+  alarm-attributes access-port sfp-tx-flt nsa mn
+  alarm-attributes access-port sfp-tx-flt sa cr
+  alarm-attributes access-port rmt-efm-lpbk-fail nsa na
+  alarm-attributes access-port rmt-efm-lpbk-fail sa mn
+  alarm-attributes access-port bw-exceeds-neg-speed nsa mn
+  alarm-attributes access-port bw-exceeds-neg-speed sa mj
+  alarm-attributes access-port sfp-non-qualified nsa mn
+  alarm-attributes access-port lnkdn-master-slave-cfg nsa mn
+  alarm-attributes access-port lnkdn-master-slave-cfg sa cr
+  alarm-attributes access-port link-control-protocol-fail nsa mn
+  alarm-attributes access-port link-control-protocol-fail sa cr
+  alarm-attributes access-port link-control-protocol-loopback nsa mn
+  alarm-attributes access-port link-control-protocol-loopback sa cr
+  alarm-attributes access-port test-alarm nsa mj
+  alarm-attributes access-port amp-no-peer sa mj
+  alarm-attributes access-port amp-prov-fail nsa mn
+  alarm-attributes access-port amp-config-fail sa cr
+  alarm-attributes access-port lpbk-active nsa na
+  alarm-attributes access-port lpbk-requested nsa na
+  alarm-attributes network-port forced nsa na
+  alarm-attributes network-port lockout nsa na
+  alarm-attributes network-port farend-duplex-unknown nsa mn
+  alarm-attributes network-port farend-duplex-unknown sa mj
+  alarm-attributes network-port efm-oam-dying-gasp nsa mn
+  alarm-attributes network-port efm-oam-dying-gasp sa cr
+  alarm-attributes network-port efm-fail nsa mn
+  alarm-attributes network-port efm-fail sa mn
+  alarm-attributes network-port efm-rce nsa mn
+  alarm-attributes network-port efm-rce sa mn
+  alarm-attributes network-port efm-rld nsa mn
+  alarm-attributes network-port efm-rld sa mn
+  alarm-attributes network-port efm-rls nsa mn
+  alarm-attributes network-port efm-rls sa mn
+  alarm-attributes network-port lnkdn-deact nsa mn
+  alarm-attributes network-port lnkdn-deact sa cr
+  alarm-attributes network-port lnkdn-unisolated nsa mn
+  alarm-attributes network-port lnkdn-unisolated sa cr
+  alarm-attributes network-port lnkdn-cbl-flt nsa mn
+  alarm-attributes network-port lnkdn-cbl-flt sa cr
+  alarm-attributes network-port lnkdn-cbl-rmvd nsa mn
+  alarm-attributes network-port lnkdn-cbl-rmvd sa cr
+  alarm-attributes network-port lnkdn-autoneg-failed nsa mn
+  alarm-attributes network-port lnkdn-autoneg-failed sa cr
+  alarm-attributes network-port lnkdn nsa mn
+  alarm-attributes network-port lnkdn sa cr
+  alarm-attributes network-port rfi nsa mn
+  alarm-attributes network-port rfi sa mn
+  alarm-attributes network-port rx-jabber nsa mn
+  alarm-attributes network-port rx-jabber sa mj
+  alarm-attributes network-port sfp-mismatch nsa mn
+  alarm-attributes network-port sfp-mismatch sa cr
+  alarm-attributes network-port sfp-rmvd nsa mn
+  alarm-attributes network-port sfp-rmvd sa cr
+  alarm-attributes network-port sfp-tx-flt nsa mn
+  alarm-attributes network-port sfp-tx-flt sa cr
+  alarm-attributes network-port rmt-efm-lpbk-fail nsa na
+  alarm-attributes network-port rmt-efm-lpbk-fail sa mn
+  alarm-attributes network-port bw-exceeds-neg-speed nsa mn
+  alarm-attributes network-port bw-exceeds-neg-speed sa mj
+  alarm-attributes network-port sfp-non-qualified nsa mn
+  alarm-attributes network-port lnkdn-master-slave-cfg nsa mn
+  alarm-attributes network-port lnkdn-master-slave-cfg sa cr
+  alarm-attributes network-port link-control-protocol-fail nsa mn
+  alarm-attributes network-port link-control-protocol-fail sa cr
+  alarm-attributes network-port link-control-protocol-loopback nsa mn
+  alarm-attributes network-port link-control-protocol-loopback sa cr
+  alarm-attributes network-port test-alarm nsa mj
+  alarm-attributes network-port amp-no-peer sa mj
+  alarm-attributes network-port amp-prov-fail nsa mn
+  alarm-attributes network-port amp-config-fail sa cr
+  alarm-attributes network-port lpbk-active nsa na
+  alarm-attributes network-port lpbk-requested nsa na
+  alarm-attributes cfm-mep xcon-ccm sa mn
+  alarm-attributes cfm-mep err-ccm sa mn
+  alarm-attributes cfm-mep rem-ccm sa mn
+  alarm-attributes cfm-mep mac-status sa mn
+  alarm-attributes cfm-mep rdi sa mn
+  alarm-attributes cfm-mep ais sa nr
+  alarm-attributes cfm-qos-shaper shaper-btd nsa na
+  alarm-attributes dcn-port lnkdn sa na
+  alarm-attributes lag lnkdn-deact sa cr
+  alarm-attributes lag lnkdn sa cr
+  alarm-attributes lag link-control-protocol-fail sa cr
+  alarm-attributes lag link-control-protocol-loopback sa cr
+  alarm-attributes lag lpbk-active nsa na
+  alarm-attributes lag lpbk-requested nsa na
+  alarm-attributes shelf-nte112 overtemp nsa mn
+  alarm-attributes shelf-nte112 undertemp nsa mn
+  alarm-attributes nte112 ctneqpt nsa mn
+  alarm-attributes nte112 eqpt-flt sa cr
+  alarm-attributes nte112 mismatch sa cr
+  alarm-attributes nte112 eqpt-rmvd sa cr
+  alarm-attributes nte112 test-alarm nsa mj
+  alarm-attributes g3-dcn lnkdn nsa na
+  alarm-attributes g3-dcn modemnonqualified nsa na
+  alarm-attributes g3-dcn modemremoved nsa na
+  alarm-attributes g3-dcn no-sim-card nsa na
+  alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+  syslog-server 1
+    configure ip-version ipv4
+    configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+    back
+  syslog-server 2
+    configure ip-version ipv4
+    configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+    back
+  syslog-server 3
+    configure ip-version ipv4
+    configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
+    back
+  audit-log
+    syslog-control disabled
+    log2file-control enabled
+    back
+  security-log
+    syslog-control disabled
+    back
+  alarm-log
+    syslog-control disabled
+    log2file-control enabled
+    back
+  acl-entry acl-1
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-2
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-3
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-4
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-5
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-6
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-7
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-8
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-9
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+    back
+  acl-entry acl-10
+    control disabled
+    configure permit ipv4 0.0.0.0 255.255.255.255
+#
+#CLI:SECURITY SYSTEM  Edit
+#
+home
+configure user-security
+  access-order local
+  auth-protocol radius
+  auth-type pap
+  nas-ip-address 10.199.192.134
+  nas-ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+  security-strength high
+  accounting disabled
+  config-ssl-strength low
+  tacacs-privilege-control enabled
+  security-trap-type disabled
+  config-rap 1
+    ip-version ipv4
+    ip-address 156.110.31.11
+    ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+    port 1812
+    accounting-port 1813
+    order first
+    timeout 3
+    retries 5
+    control enabled
+    back
+  config-rap 2
+    ip-version ipv4
+    control disabled
+    ip-address 0.0.0.0
+    ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+    port 1812
+    accounting-port 1813
+    order second
+    timeout 3
+    retries 5
+    back
+  config-rap 3
+    ip-version ipv4
+    control disabled
+    ip-address 0.0.0.0
+    ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+    port 1812
+    accounting-port 1813
+    order third
+    timeout 3
+    retries 5
+#
+#CLI:SNMP COMMUNITY ENTRY  Delete
+#
+home
+configure snmp
+  delete community "private"
+#
+#CLI:SNMP COMMUNITY ENTRY  Delete
+#
+home
+configure snmp
+  delete community "public"
+#
+#CLI:SAT SAC PROFILE-1  Edit
+#
+home
+configure system
+  profile
+    configure sac-profile sat_sac_profile-1
+      name "SAT_SAC_Profile_1"
+      flr 5.000000
+      ftd 300
+      fdv 300
+#
+#CLI:SAT SAC PROFILE-2  Edit
+#
+home
+configure system
+  profile
+    configure sac-profile sat_sac_profile-2
+      name "SAT_SAC_Profile_2"
+      flr 5.000000
+      ftd 300
+      fdv 300
+#
+#CLI:SAT SAC PROFILE-3  Edit
+#
+home
+configure system
+  profile
+    configure sac-profile sat_sac_profile-3
+      name "SAT_SAC_Profile_3"
+      flr 5.000000
+      ftd 300
+      fdv 300
+#
+#CLI:SAT SAC PROFILE-4  Edit
+#
+home
+configure system
+  profile
+    configure sac-profile sat_sac_profile-4
+      name "SAT_SAC_Profile_4"
+      flr 5.000000
+      ftd 300
+      fdv 300
+#
+#CLI:SNMP COMMUNITY ENTRY  Create
+#
+home
+configure snmp
+  add community "community" readonly
+#
+#CLI:SNMP COMMUNITY ENTRY  Create
+#
+home
+configure snmp
+  add community "etn1net" readwrite
+#
+#CLI:NE-1  Edit
+#
+home
+network-element ne-1
+  prompt "NE-1"
+  name "PIEDMONT-PS-GE112"
+  contact ""
+  location ""
+  pm-interval 15min
+  admin-state in-service
+#
+#CLI:NTE112-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    admin-state in-service
+    alias ""
+    snmp-dying-gasp disabled
+#
+#CLI:DCN-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure dcn
+      admin-state in-service
+      speed auto
+      alias ""
+      mdix auto
+#
+#CLI:ACCESS PORT-1-1-1-3  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      admin-state unassigned
+      service-type epl
+      speed auto
+      port-shaped-speed 0
+      port-shaping disabled
+      mdix auto
+      lpbk
+        inner-vlan1-control disabled
+        outer-vlan1-control disabled
+        inner-vlan2-control disabled
+        outer-vlan2-control disabled
+        inner-vlan3-control disabled
+        outer-vlan3-control disabled
+        back
+      efm-oam
+        oam-control disabled
+        oam-local-mode oam-active
+        back
+      llf
+        llf-control disabled
+        llf-trigger-event none
+        llf-tx-action-type no-action
+        llf-delay 0
+        local-link-id 3
+        remote-link-ids none
+        back
+      lpbk
+        block enabled
+        dst-mac-control disabled
+        src-mac-control disabled
+        outer-vlan1 4094-0
+        inner-vlan1 4094-0
+        outer-vlan2 4094-1
+        inner-vlan2 4094-1
+        outer-vlan3 4094-2
+        inner-vlan3 4094-2
+        lpbk-timer 10
+        jdsu-lpbk-control disabled
+        swap-sada sada
+        back
+      alias ""
+      auto-diagnostic enabled
+      mtu 9600
+      afp all-afp
+      rx-pause disabled
+      tx-pause disabled
+      qinq-ethertype 0x0
+      pcp-mode none
+      rx-dei-action use
+      rx-dei-tag-type ctag-or-stag
+      tx-dei-action mark-color
+      tx-dei-tag-type stag
+      multicast-rate-limit-ctrl disabled
+      broadcast-rate-limit-ctrl disabled
+      combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-3-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+      cpd-filter isl pass-thru
+      cpd-filter pagp pass-thru
+      cpd-filter udld pass-thru
+      cpd-filter cdp pass-thru
+      cpd-filter vtp pass-thru
+      cpd-filter dtp pass-thru
+      cpd-filter pvstp+ pass-thru
+      cpd-filter uplinkfast pass-thru
+      cpd-filter vlan-bridge pass-thru
+      cpd-filter l2pt pass-thru
+      cpd-filter bpdu pass-thru
+      cpd-filter pause pass-thru
+      cpd-filter lacp pass-thru
+      cpd-filter lacp-marker pass-thru
+      cpd-filter efm-oam discard
+      cpd-filter ssm discard
+      cpd-filter port-authen pass-thru
+      cpd-filter lan-bridges pass-thru
+      cpd-filter gmrp pass-thru
+      cpd-filter gvrp pass-thru
+      cpd-filter garp pass-thru
+      cpd-filter elmi pass-thru
+      cpd-filter 01-80-c2-00-00-00 pass-thru
+      cpd-filter 01-80-c2-00-00-01 discard
+      cpd-filter 01-80-c2-00-00-02 discard
+      cpd-filter 01-80-c2-00-00-03 discard
+      cpd-filter 01-80-c2-00-00-04 discard
+      cpd-filter 01-80-c2-00-00-05 discard
+      cpd-filter 01-80-c2-00-00-06 discard
+      cpd-filter 01-80-c2-00-00-07 discard
+      cpd-filter 01-80-c2-00-00-08 discard
+      cpd-filter 01-80-c2-00-00-09 discard
+      cpd-filter 01-80-c2-00-00-0a discard
+      cpd-filter 01-80-c2-00-00-0b pass-thru
+      cpd-filter 01-80-c2-00-00-0c pass-thru
+      cpd-filter 01-80-c2-00-00-0d pass-thru
+      cpd-filter 01-80-c2-00-00-0e discard
+      cpd-filter 01-80-c2-00-00-0f pass-thru
+      cpd-filter nearest-lldp discard
+      cpd-filter non-tpmr-lldp discard
+      cpd-filter customer-lldp discard
+      clb 1
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      clb 2
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      clb 3
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      clb 4
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      clb 5
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      pm
+        set-threshold abrrx 0 15min
+        set-threshold abrtx 0 15min
+        set-threshold aufd 0 15min
+        set-threshold apfd 0 15min
+        set-threshold esbf 0 15min
+        set-threshold esbp 0 15min
+        set-threshold esbs 0 15min
+        set-threshold esc 0 15min
+        set-threshold escae 37055 15min
+        set-threshold esde 37055 15min
+        set-threshold esf 37055 15min
+        set-threshold esfs 0 15min
+        set-threshold esj 0 15min
+        set-threshold esmf 0 15min
+        set-threshold esmp 0 15min
+        set-threshold eso 0 15min
+        set-threshold esof 0 15min
+        set-threshold esop 37055 15min
+        set-threshold esp 0 15min
+        set-threshold esp64 0 15min
+        set-threshold esp65 0 15min
+        set-threshold esp128 0 15min
+        set-threshold esp256 0 15min
+        set-threshold esp512 0 15min
+        set-threshold esp1024 0 15min
+        set-threshold esp1519 0 15min
+        set-threshold esuf 0 15min
+        set-threshold esup 37055 15min
+        set-threshold l2cpfd 0 15min
+        set-threshold l2cpfp 0 15min
+        set-threshold l2ptfe 0 15min
+        set-threshold l2ptfd 0 15min
+        set-threshold uas 10 15min
+        set-threshold ibrmaxrx 0 15min
+        set-threshold ibrmaxtx 0 15min
+        set-threshold ibrminrx 0 15min
+        set-threshold ibrmintx 0 15min
+        set-threshold ibrrx 0 15min
+        set-threshold ibrtx 0 15min
+        set-threshold fmcd 0 15min
+        set-threshold fbcd 0 15min
+        set-threshold abrrx 0 1day
+        set-threshold abrtx 0 1day
+        set-threshold aufd 0 1day
+        set-threshold apfd 0 1day
+        set-threshold esbf 0 1day
+        set-threshold esbp 0 1day
+        set-threshold esbs 0 1day
+        set-threshold esc 0 1day
+        set-threshold escae 3557280 1day
+        set-threshold esde 3557280 1day
+        set-threshold esf 3557280 1day
+        set-threshold esfs 0 1day
+        set-threshold esj 0 1day
+        set-threshold esmf 0 1day
+        set-threshold esmp 0 1day
+        set-threshold eso 0 1day
+        set-threshold esof 0 1day
+        set-threshold esop 3557280 1day
+        set-threshold esp 0 1day
+        set-threshold esp64 0 1day
+        set-threshold esp65 0 1day
+        set-threshold esp128 0 1day
+        set-threshold esp256 0 1day
+        set-threshold esp512 0 1day
+        set-threshold esp1024 0 1day
+        set-threshold esp1519 0 1day
+        set-threshold esuf 0 1day
+        set-threshold esup 3557280 1day
+        set-threshold l2cpfd 0 1day
+        set-threshold l2cpfp 0 1day
+        set-threshold l2ptfe 0 1day
+        set-threshold l2ptfd 0 1day
+        set-threshold uas 10 1day
+        set-threshold ibrmaxrx 0 1day
+        set-threshold ibrmaxtx 0 1day
+        set-threshold ibrminrx 0 1day
+        set-threshold ibrmintx 0 1day
+        set-threshold ibrrx 0 1day
+        set-threshold ibrtx 0 1day
+        set-threshold fmcd 0 1day
+        set-threshold fbcd 0 1day
+#
+#CLI:ACCESS PORT-1-1-1-4  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      admin-state in-service
+      service-type epl
+      speed auto
+      port-shaped-speed 0
+      port-shaping disabled
+      mdix auto
+      lpbk
+        inner-vlan1-control disabled
+        outer-vlan1-control disabled
+        inner-vlan2-control disabled
+        outer-vlan2-control disabled
+        inner-vlan3-control disabled
+        outer-vlan3-control disabled
+        back
+      efm-oam
+        oam-control disabled
+        oam-local-mode oam-active
+        back
+      llf
+        llf-control disabled
+        llf-trigger-event none
+        llf-tx-action-type no-action
+        llf-delay 0
+        local-link-id 4
+        remote-link-ids none
+        back
+      lpbk
+        block enabled
+        dst-mac-control disabled
+        src-mac-control disabled
+        outer-vlan1 4094-0
+        inner-vlan1 4094-0
+        outer-vlan2 4094-1
+        inner-vlan2 4094-1
+        outer-vlan3 4094-2
+        inner-vlan3 4094-2
+        lpbk-timer 10
+        jdsu-lpbk-control disabled
+        swap-sada none
+        back
+      alias "PIEDMONT-PS-1G-CIR0019066"
+      auto-diagnostic enabled
+      mtu 9600
+      afp all-afp
+      rx-pause disabled
+      tx-pause disabled
+      qinq-ethertype 0x0
+      pcp-mode none
+      rx-dei-action use
+      rx-dei-tag-type ctag-or-stag
+      tx-dei-action mark-color
+      tx-dei-tag-type stag
+      multicast-rate-limit-ctrl disabled
+      broadcast-rate-limit-ctrl disabled
+      combined-rate-limit-ctrl disabled
+#
+#CLI:ACCESS CPDV2-1-1-1-4-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+      cpd-filter isl pass-thru
+      cpd-filter pagp pass-thru
+      cpd-filter udld pass-thru
+      cpd-filter cdp pass-thru
+      cpd-filter vtp pass-thru
+      cpd-filter dtp pass-thru
+      cpd-filter pvstp+ pass-thru
+      cpd-filter uplinkfast pass-thru
+      cpd-filter vlan-bridge pass-thru
+      cpd-filter l2pt pass-thru
+      cpd-filter bpdu pass-thru
+      cpd-filter pause pass-thru
+      cpd-filter lacp pass-thru
+      cpd-filter lacp-marker pass-thru
+      cpd-filter efm-oam discard
+      cpd-filter ssm discard
+      cpd-filter port-authen pass-thru
+      cpd-filter lan-bridges pass-thru
+      cpd-filter gmrp pass-thru
+      cpd-filter gvrp pass-thru
+      cpd-filter garp pass-thru
+      cpd-filter elmi pass-thru
+      cpd-filter 01-80-c2-00-00-00 pass-thru
+      cpd-filter 01-80-c2-00-00-01 discard
+      cpd-filter 01-80-c2-00-00-02 discard
+      cpd-filter 01-80-c2-00-00-03 discard
+      cpd-filter 01-80-c2-00-00-04 discard
+      cpd-filter 01-80-c2-00-00-05 discard
+      cpd-filter 01-80-c2-00-00-06 discard
+      cpd-filter 01-80-c2-00-00-07 discard
+      cpd-filter 01-80-c2-00-00-08 discard
+      cpd-filter 01-80-c2-00-00-09 discard
+      cpd-filter 01-80-c2-00-00-0a discard
+      cpd-filter 01-80-c2-00-00-0b pass-thru
+      cpd-filter 01-80-c2-00-00-0c pass-thru
+      cpd-filter 01-80-c2-00-00-0d pass-thru
+      cpd-filter 01-80-c2-00-00-0e discard
+      cpd-filter 01-80-c2-00-00-0f pass-thru
+      cpd-filter nearest-lldp discard
+      cpd-filter non-tpmr-lldp discard
+      cpd-filter customer-lldp discard
+      clb 1
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      clb 2
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      clb 3
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      clb 4
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      clb 5
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      pm
+        set-threshold abrrx 0 15min
+        set-threshold abrtx 0 15min
+        set-threshold aufd 0 15min
+        set-threshold apfd 0 15min
+        set-threshold esbf 0 15min
+        set-threshold esbp 0 15min
+        set-threshold esbs 0 15min
+        set-threshold esc 0 15min
+        set-threshold escae 37055 15min
+        set-threshold esde 37055 15min
+        set-threshold esf 37055 15min
+        set-threshold esfs 0 15min
+        set-threshold esj 0 15min
+        set-threshold esmf 0 15min
+        set-threshold esmp 0 15min
+        set-threshold eso 0 15min
+        set-threshold esof 0 15min
+        set-threshold esop 37055 15min
+        set-threshold esp 0 15min
+        set-threshold esp64 0 15min
+        set-threshold esp65 0 15min
+        set-threshold esp128 0 15min
+        set-threshold esp256 0 15min
+        set-threshold esp512 0 15min
+        set-threshold esp1024 0 15min
+        set-threshold esp1519 0 15min
+        set-threshold esuf 0 15min
+        set-threshold esup 37055 15min
+        set-threshold l2cpfd 0 15min
+        set-threshold l2cpfp 0 15min
+        set-threshold l2ptfe 0 15min
+        set-threshold l2ptfd 0 15min
+        set-threshold uas 10 15min
+        set-threshold ibrmaxrx 0 15min
+        set-threshold ibrmaxtx 0 15min
+        set-threshold ibrminrx 0 15min
+        set-threshold ibrmintx 0 15min
+        set-threshold ibrrx 0 15min
+        set-threshold ibrtx 0 15min
+        set-threshold fmcd 0 15min
+        set-threshold fbcd 0 15min
+        set-threshold abrrx 0 1day
+        set-threshold abrtx 0 1day
+        set-threshold aufd 0 1day
+        set-threshold apfd 0 1day
+        set-threshold esbf 0 1day
+        set-threshold esbp 0 1day
+        set-threshold esbs 0 1day
+        set-threshold esc 0 1day
+        set-threshold escae 3557280 1day
+        set-threshold esde 3557280 1day
+        set-threshold esf 3557280 1day
+        set-threshold esfs 0 1day
+        set-threshold esj 0 1day
+        set-threshold esmf 0 1day
+        set-threshold esmp 0 1day
+        set-threshold eso 0 1day
+        set-threshold esof 0 1day
+        set-threshold esop 3557280 1day
+        set-threshold esp 0 1day
+        set-threshold esp64 0 1day
+        set-threshold esp65 0 1day
+        set-threshold esp128 0 1day
+        set-threshold esp256 0 1day
+        set-threshold esp512 0 1day
+        set-threshold esp1024 0 1day
+        set-threshold esp1519 0 1day
+        set-threshold esuf 0 1day
+        set-threshold esup 3557280 1day
+        set-threshold l2cpfd 0 1day
+        set-threshold l2cpfp 0 1day
+        set-threshold l2ptfe 0 1day
+        set-threshold l2ptfd 0 1day
+        set-threshold uas 10 1day
+        set-threshold ibrmaxrx 0 1day
+        set-threshold ibrmaxtx 0 1day
+        set-threshold ibrminrx 0 1day
+        set-threshold ibrmintx 0 1day
+        set-threshold ibrrx 0 1day
+        set-threshold ibrtx 0 1day
+        set-threshold fmcd 0 1day
+        set-threshold fbcd 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      admin-state in-service
+      media copper auto
+      port-shaped-speed 0
+      port-shaping disabled
+      mdix auto
+      lpbk
+        inner-vlan1-control disabled
+        outer-vlan1-control disabled
+        inner-vlan2-control disabled
+        outer-vlan2-control disabled
+        inner-vlan3-control disabled
+        outer-vlan3-control disabled
+        back
+      efm-oam
+        oam-control disabled
+        oam-local-mode oam-active
+        back
+      alias ""
+      auto-diagnostic enabled
+      mtu 9612
+      qinq-ethertype 0x8100
+      priority-mapping-profile prio_map_profile-1
+      pcp-mode none
+      rx-dei-action use
+      rx-dei-tag-type ctag-or-stag
+      tx-dei-action mark-color
+      tx-dei-tag-type stag
+      lpbk
+        block enabled
+        dst-mac-control disabled
+        src-mac-control disabled
+        outer-vlan1 4094-0
+        inner-vlan1 4094-0
+        outer-vlan2 4094-1
+        inner-vlan2 4094-1
+        outer-vlan3 4094-2
+        inner-vlan3 4094-2
+        lpbk-timer 10
+        jdsu-lpbk-control disabled
+        swap-sada none
+        back
+      llf
+        llf-control disabled
+        llf-trigger-event none
+        llf-tx-action-type no-action
+        llf-delay 0
+        local-link-id 1
+        remote-link-ids none
+#
+#CLI:NETWORK CPDV2-1-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      cpd-filter isl pass-thru
+      cpd-filter pagp pass-thru
+      cpd-filter udld pass-thru
+      cpd-filter cdp pass-thru
+      cpd-filter vtp pass-thru
+      cpd-filter dtp pass-thru
+      cpd-filter pvstp+ pass-thru
+      cpd-filter uplinkfast pass-thru
+      cpd-filter vlan-bridge pass-thru
+      cpd-filter l2pt pass-thru
+      cpd-filter bpdu pass-thru
+      cpd-filter pause pass-thru
+      cpd-filter lacp pass-thru
+      cpd-filter lacp-marker pass-thru
+      cpd-filter efm-oam discard
+      cpd-filter ssm discard
+      cpd-filter port-authen pass-thru
+      cpd-filter lan-bridges pass-thru
+      cpd-filter gmrp pass-thru
+      cpd-filter gvrp pass-thru
+      cpd-filter garp pass-thru
+      cpd-filter elmi pass-thru
+      cpd-filter 01-80-c2-00-00-00 discard
+      cpd-filter 01-80-c2-00-00-01 discard
+      cpd-filter 01-80-c2-00-00-02 discard
+      cpd-filter 01-80-c2-00-00-03 discard
+      cpd-filter 01-80-c2-00-00-04 discard
+      cpd-filter 01-80-c2-00-00-05 discard
+      cpd-filter 01-80-c2-00-00-06 discard
+      cpd-filter 01-80-c2-00-00-07 discard
+      cpd-filter 01-80-c2-00-00-08 discard
+      cpd-filter 01-80-c2-00-00-09 discard
+      cpd-filter 01-80-c2-00-00-0a discard
+      cpd-filter 01-80-c2-00-00-0b discard
+      cpd-filter 01-80-c2-00-00-0c discard
+      cpd-filter 01-80-c2-00-00-0d discard
+      cpd-filter 01-80-c2-00-00-0e discard
+      cpd-filter 01-80-c2-00-00-0f discard
+      cpd-filter nearest-lldp discard
+      cpd-filter non-tpmr-lldp discard
+      cpd-filter customer-lldp discard
+      clb 1
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      clb 2
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      clb 3
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      clb 4
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      clb 5
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      pm
+        set-threshold abrrx 0 15min
+        set-threshold abrtx 0 15min
+        set-threshold esbf 0 15min
+        set-threshold esbp 0 15min
+        set-threshold esbs 0 15min
+        set-threshold esc 0 15min
+        set-threshold escae 37055 15min
+        set-threshold esde 37055 15min
+        set-threshold esf 37055 15min
+        set-threshold esfs 0 15min
+        set-threshold esj 0 15min
+        set-threshold esmf 0 15min
+        set-threshold esmp 0 15min
+        set-threshold eso 0 15min
+        set-threshold esof 0 15min
+        set-threshold esop 37055 15min
+        set-threshold esp 0 15min
+        set-threshold esp64 0 15min
+        set-threshold esp65 0 15min
+        set-threshold esp128 0 15min
+        set-threshold esp256 0 15min
+        set-threshold esp512 0 15min
+        set-threshold esp1024 0 15min
+        set-threshold esp1519 0 15min
+        set-threshold esuf 0 15min
+        set-threshold esup 37055 15min
+        set-threshold l2cpfd 0 15min
+        set-threshold l2cpfp 0 15min
+        set-threshold psc 0 15min
+        set-threshold uas 10 15min
+        set-threshold pbbunibdadiscard 0 15min
+        set-threshold pbbgrpbdadiscard 0 15min
+        set-threshold ibrmaxrx 0 15min
+        set-threshold ibrmaxtx 0 15min
+        set-threshold ibrminrx 0 15min
+        set-threshold ibrmintx 0 15min
+        set-threshold ibrrx 0 15min
+        set-threshold ibrtx 0 15min
+        set-threshold abrrx 0 1day
+        set-threshold abrtx 0 1day
+        set-threshold esbf 0 1day
+        set-threshold esbp 0 1day
+        set-threshold esbs 0 1day
+        set-threshold esc 0 1day
+        set-threshold escae 3557280 1day
+        set-threshold esde 3557280 1day
+        set-threshold esf 3557280 1day
+        set-threshold esfs 0 1day
+        set-threshold esj 0 1day
+        set-threshold esmf 0 1day
+        set-threshold esmp 0 1day
+        set-threshold eso 0 1day
+        set-threshold esof 0 1day
+        set-threshold esop 3557280 1day
+        set-threshold esp 0 1day
+        set-threshold esp64 0 1day
+        set-threshold esp65 0 1day
+        set-threshold esp128 0 1day
+        set-threshold esp256 0 1day
+        set-threshold esp512 0 1day
+        set-threshold esp1024 0 1day
+        set-threshold esp1519 0 1day
+        set-threshold esuf 0 1day
+        set-threshold esup 3557280 1day
+        set-threshold l2cpfd 0 1day
+        set-threshold l2cpfp 0 1day
+        set-threshold psc 0 1day
+        set-threshold uas 10 1day
+        set-threshold pbbunibdadiscard 0 1day
+        set-threshold pbbgrpbdadiscard 0 1day
+        set-threshold ibrmaxrx 0 1day
+        set-threshold ibrmaxtx 0 1day
+        set-threshold ibrminrx 0 1day
+        set-threshold ibrmintx 0 1day
+        set-threshold ibrrx 0 1day
+        set-threshold ibrtx 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-2  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      admin-state unassigned
+      media copper auto
+      port-shaped-speed 0
+      port-shaping disabled
+      mdix auto
+      lpbk
+        inner-vlan1-control disabled
+        outer-vlan1-control disabled
+        inner-vlan2-control disabled
+        outer-vlan2-control disabled
+        inner-vlan3-control disabled
+        outer-vlan3-control disabled
+        back
+      efm-oam
+        oam-control disabled
+        oam-local-mode oam-active
+        back
+      alias ""
+      auto-diagnostic enabled
+      mtu 9612
+      qinq-ethertype 0x0
+      priority-mapping-profile prio_map_profile-1
+      pcp-mode none
+      rx-dei-action use
+      rx-dei-tag-type ctag-or-stag
+      tx-dei-action mark-color
+      tx-dei-tag-type stag
+      lpbk
+        block enabled
+        dst-mac-control disabled
+        src-mac-control disabled
+        outer-vlan1 4094-0
+        inner-vlan1 4094-0
+        outer-vlan2 4094-1
+        inner-vlan2 4094-1
+        outer-vlan3 4094-2
+        inner-vlan3 4094-2
+        lpbk-timer 10
+        jdsu-lpbk-control disabled
+        swap-sada none
+        back
+      llf
+        llf-control disabled
+        llf-trigger-event none
+        llf-tx-action-type no-action
+        llf-delay 0
+        local-link-id 2
+        remote-link-ids none
+#
+#CLI:NETWORK CPDV2-1-1-1-2-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      cpd-filter isl pass-thru
+      cpd-filter pagp pass-thru
+      cpd-filter udld pass-thru
+      cpd-filter cdp pass-thru
+      cpd-filter vtp pass-thru
+      cpd-filter dtp pass-thru
+      cpd-filter pvstp+ pass-thru
+      cpd-filter uplinkfast pass-thru
+      cpd-filter vlan-bridge pass-thru
+      cpd-filter l2pt pass-thru
+      cpd-filter bpdu pass-thru
+      cpd-filter pause pass-thru
+      cpd-filter lacp pass-thru
+      cpd-filter lacp-marker pass-thru
+      cpd-filter efm-oam discard
+      cpd-filter ssm discard
+      cpd-filter port-authen pass-thru
+      cpd-filter lan-bridges pass-thru
+      cpd-filter gmrp pass-thru
+      cpd-filter gvrp pass-thru
+      cpd-filter garp pass-thru
+      cpd-filter elmi pass-thru
+      cpd-filter 01-80-c2-00-00-00 discard
+      cpd-filter 01-80-c2-00-00-01 discard
+      cpd-filter 01-80-c2-00-00-02 discard
+      cpd-filter 01-80-c2-00-00-03 discard
+      cpd-filter 01-80-c2-00-00-04 discard
+      cpd-filter 01-80-c2-00-00-05 discard
+      cpd-filter 01-80-c2-00-00-06 discard
+      cpd-filter 01-80-c2-00-00-07 discard
+      cpd-filter 01-80-c2-00-00-08 discard
+      cpd-filter 01-80-c2-00-00-09 discard
+      cpd-filter 01-80-c2-00-00-0a discard
+      cpd-filter 01-80-c2-00-00-0b discard
+      cpd-filter 01-80-c2-00-00-0c discard
+      cpd-filter 01-80-c2-00-00-0d discard
+      cpd-filter 01-80-c2-00-00-0e discard
+      cpd-filter 01-80-c2-00-00-0f discard
+      cpd-filter nearest-lldp discard
+      cpd-filter non-tpmr-lldp discard
+      cpd-filter customer-lldp discard
+      clb 1
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      clb 2
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      clb 3
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      clb 4
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      clb 5
+        length 0.10
+        description ""
+        control disabled
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      pm
+        set-threshold abrrx 0 15min
+        set-threshold abrtx 0 15min
+        set-threshold esbf 0 15min
+        set-threshold esbp 0 15min
+        set-threshold esbs 0 15min
+        set-threshold esc 0 15min
+        set-threshold escae 37055 15min
+        set-threshold esde 37055 15min
+        set-threshold esf 37055 15min
+        set-threshold esfs 0 15min
+        set-threshold esj 0 15min
+        set-threshold esmf 0 15min
+        set-threshold esmp 0 15min
+        set-threshold eso 0 15min
+        set-threshold esof 0 15min
+        set-threshold esop 37055 15min
+        set-threshold esp 0 15min
+        set-threshold esp64 0 15min
+        set-threshold esp65 0 15min
+        set-threshold esp128 0 15min
+        set-threshold esp256 0 15min
+        set-threshold esp512 0 15min
+        set-threshold esp1024 0 15min
+        set-threshold esp1519 0 15min
+        set-threshold esuf 0 15min
+        set-threshold esup 37055 15min
+        set-threshold l2cpfd 0 15min
+        set-threshold l2cpfp 0 15min
+        set-threshold psc 0 15min
+        set-threshold uas 10 15min
+        set-threshold pbbunibdadiscard 0 15min
+        set-threshold pbbgrpbdadiscard 0 15min
+        set-threshold ibrmaxrx 0 15min
+        set-threshold ibrmaxtx 0 15min
+        set-threshold ibrminrx 0 15min
+        set-threshold ibrmintx 0 15min
+        set-threshold ibrrx 0 15min
+        set-threshold ibrtx 0 15min
+        set-threshold abrrx 0 1day
+        set-threshold abrtx 0 1day
+        set-threshold esbf 0 1day
+        set-threshold esbp 0 1day
+        set-threshold esbs 0 1day
+        set-threshold esc 0 1day
+        set-threshold escae 3557280 1day
+        set-threshold esde 3557280 1day
+        set-threshold esf 3557280 1day
+        set-threshold esfs 0 1day
+        set-threshold esj 0 1day
+        set-threshold esmf 0 1day
+        set-threshold esmp 0 1day
+        set-threshold eso 0 1day
+        set-threshold esof 0 1day
+        set-threshold esop 3557280 1day
+        set-threshold esp 0 1day
+        set-threshold esp64 0 1day
+        set-threshold esp65 0 1day
+        set-threshold esp128 0 1day
+        set-threshold esp256 0 1day
+        set-threshold esp512 0 1day
+        set-threshold esp1024 0 1day
+        set-threshold esp1519 0 1day
+        set-threshold esuf 0 1day
+        set-threshold esup 3557280 1day
+        set-threshold l2cpfd 0 1day
+        set-threshold l2cpfp 0 1day
+        set-threshold psc 0 1day
+        set-threshold uas 10 1day
+        set-threshold pbbunibdadiscard 0 1day
+        set-threshold pbbgrpbdadiscard 0 1day
+        set-threshold ibrmaxrx 0 1day
+        set-threshold ibrmaxtx 0 1day
+        set-threshold ibrminrx 0 1day
+        set-threshold ibrmintx 0 1day
+        set-threshold ibrrx 0 1day
+        set-threshold ibrtx 0 1day
+#
+#CLI:ECPA CONFIG-1  Edit
+#
+home
+configure system
+  ecpa-streams 1
+    stream-name "stream-1"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-2  Edit
+#
+home
+configure system
+  ecpa-streams 2
+    stream-name "stream-2"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-3  Edit
+#
+home
+configure system
+  ecpa-streams 3
+    stream-name "stream-3"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-4  Edit
+#
+home
+configure system
+  ecpa-streams 4
+    stream-name "stream-4"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-5  Edit
+#
+home
+configure system
+  ecpa-streams 5
+    stream-name "stream-5"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-6  Edit
+#
+home
+configure system
+  ecpa-streams 6
+    stream-name "stream-6"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-7  Edit
+#
+home
+configure system
+  ecpa-streams 7
+    stream-name "stream-7"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-8  Edit
+#
+home
+configure system
+  ecpa-streams 8
+    stream-name "stream-8"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-9  Edit
+#
+home
+configure system
+  ecpa-streams 9
+    stream-name "stream-9"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-10  Edit
+#
+home
+configure system
+  ecpa-streams 10
+    stream-name "stream-10"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-11  Edit
+#
+home
+configure system
+  ecpa-streams 11
+    stream-name "stream-11"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-12  Edit
+#
+home
+configure system
+  ecpa-streams 12
+    stream-name "stream-12"
+    framesize 64
+    rate 10048000
+    payload-type fixed
+    dest-mac 00:80:ea:00:00:01
+    outer-vlan-control disabled
+    outer-vlan-tag 4094-1
+    outer-vlan-ethertype 0x8100
+    inner-vlan1-control disabled
+    inner-vlan1-tag 4094-1
+    inner-vlan1-ethertype 0x8100
+    inner-vlan2-control disabled
+    inner-vlan2-tag 4094-1
+    inner-vlan2-ethertype 0x8100
+    ip-version ipv4
+    source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    target-addr ipv4 0.0.0.0
+    target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+    ip-precedence-mode none 0
+    use-port-src-mac enabled
+#
+#CLI:TRAFFIC GEN-1  Edit
+#
+home
+network-element ne-1
+  configure tm-params bwp-mode line-rate
+#
+#CLI:ECPA CONTROL-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    ecpa-ctrl
+      src-port access-1-1-1-3
+      inject-direction a2n
+      monitor-direction n2a
+      test-type duration
+      test-duration 00:00:00:10
+      test-num-frames 1
+      test-stream-a 0
+      test-stream-b 0
+      test-stream-c 0
+#
+#CLI:MANAGEMENT TUNNEL-1  Create
+#
+home
+configure communication
+  add mgmttunnel 1  "MGMT" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
+  configure mgmttnl mgmt_tnl-1
+    dhcp-control disabled 10.199.192.134 255.255.255.252
+    back
+  configure mgmttnl mgmt_tnl-1
+    buffer-size 32
+    cos 7
+    back
+  configure mgmttnl mgmt_tnl-1
+    rip2Pkts-control disabled
+    dhcp-client-id-control enabled
+    dhcp-class-id-control enabled
+    dhcp-host-name-control enabled
+    dhcp-log-server-control disabled
+    dhcp-ntp-server-control disabled
+    dhcp-client-id-type mac-addr
+    dhcp-host-name-type system-name
+#
+#CLI:IP SYSTEM  Edit
+#
+home
+configure communication
+  configure eth0 ip-mode ipv4-only
+  configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+  configure eth0 dhcp-role dhcp-client
+  configure eth0 dhcp-client-id-type mac-addr
+  configure eth0 dhcp-class-id-control enabled
+  configure eth0 dhcp-host-name-control enabled
+  configure eth0 dhcp-host-name-type system-name
+  configure eth0 dhcp-log-server-control disabled
+  configure eth0 dhcp-ntp-server-control disabled
+  configure eth0 rip2Pkts-control disabled
+#
+#CLI:IP SOURCE ADDR CONFIG  Edit
+#
+home
+configure communication
+  configure src-addr out-ip-intf-addr "eth0"
+#
+#CLI:FLOW-1-1-1-3-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      configure flow flow-1-1-1-3-1
+        itag none
+        circuit-name ""
+        es-frame-loss-threshold 1
+        ses-frame-loss-threshold-ratio 30
+        network-interface network-1-1-1-1 push 3-0 none
+        a2n-shaping-type flow-based
+        policing enabled
+        policing-control a2n-n2a
+        net-to-acc-rate-limiting disabled
+        default-cos 0
+        priority-mapping-profile none
+        pbb-frames disabled
+        n2n-forwarding disabled
+        cpd-filter isl pass-thru
+        cpd-filter pagp pass-thru
+        cpd-filter udld pass-thru
+        cpd-filter cdp pass-thru
+        cpd-filter vtp pass-thru
+        cpd-filter dtp pass-thru
+        cpd-filter pvstp+ pass-thru
+        cpd-filter uplinkfast pass-thru
+        cpd-filter vlan-bridge pass-thru
+        cpd-filter l2pt pass-thru
+        cpd-filter bpdu pass-thru
+        cpd-filter pause pass-thru
+        cpd-filter lacp pass-thru
+        cpd-filter lacp-marker pass-thru
+        cpd-filter efm-oam pass-thru
+        cpd-filter ssm discard
+        cpd-filter port-authen pass-thru
+        cpd-filter lan-bridges pass-thru
+        cpd-filter gmrp pass-thru
+        cpd-filter gvrp pass-thru
+        cpd-filter garp pass-thru
+        cpd-filter elmi pass-thru
+        cpd-filter 01-80-c2-00-00-00 discard
+        cpd-filter 01-80-c2-00-00-01 discard
+        cpd-filter 01-80-c2-00-00-02 discard
+        cpd-filter 01-80-c2-00-00-03 discard
+        cpd-filter 01-80-c2-00-00-04 discard
+        cpd-filter 01-80-c2-00-00-05 discard
+        cpd-filter 01-80-c2-00-00-06 discard
+        cpd-filter 01-80-c2-00-00-07 discard
+        cpd-filter 01-80-c2-00-00-08 discard
+        cpd-filter 01-80-c2-00-00-09 discard
+        cpd-filter 01-80-c2-00-00-0a discard
+        cpd-filter 01-80-c2-00-00-0b discard
+        cpd-filter 01-80-c2-00-00-0c discard
+        cpd-filter 01-80-c2-00-00-0d discard
+        cpd-filter 01-80-c2-00-00-0e discard
+        cpd-filter 01-80-c2-00-00-0f discard
+        cpd-filter nearest-lldp discard
+        cpd-filter non-tpmr-lldp discard
+        cpd-filter customer-lldp discard
+        pm
+          set-threshold abra2n 0 15min
+          set-threshold abrrla2n 0 15min
+          set-threshold abrn2a 0 15min
+          set-threshold abrrln2a 0 15min
+          set-threshold l2cpfd 0 15min
+          set-threshold bytesina2n 0 15min
+          set-threshold bytesinn2a 0 15min
+          set-threshold bytesouta2n 0 15min
+          set-threshold bytesoutn2a 0 15min
+          set-threshold fmga2n 0 15min
+          set-threshold fmgn2a 0 15min
+          set-threshold fmrda2n 0 15min
+          set-threshold fmrdn2a 0 15min
+          set-threshold fmya2n 0 15min
+          set-threshold fmyn2a 0 15min
+          set-threshold ftda2n 0 15min
+          set-threshold ses 0 15min
+          set-threshold uas 10 15min
+          set-threshold fdhairpin 0 15min
+          set-threshold fdstaticblock 0 15min
+          set-threshold learntblentrydiscards 0 15min
+          set-threshold numlearntblflushes 0 15min
+          set-threshold ibra2nmax 0 15min
+          set-threshold ibrrla2nmax 0 15min
+          set-threshold ibra2nmin 0 15min
+          set-threshold ibrrla2nmin 0 15min
+          set-threshold ibra2n 0 15min
+          set-threshold ibrrla2n 0 15min
+          set-threshold ibrn2amax 0 15min
+          set-threshold ibrrln2amax 0 15min
+          set-threshold ibrn2amin 0 15min
+          set-threshold ibrrln2amin 0 15min
+          set-threshold ibrn2a 0 15min
+          set-threshold ibrrln2a 0 15min
+          set-threshold abra2n 0 1day
+          set-threshold abrrla2n 0 1day
+          set-threshold abrn2a 0 1day
+          set-threshold abrrln2a 0 1day
+          set-threshold l2cpfd 0 1day
+          set-threshold bytesina2n 0 1day
+          set-threshold bytesinn2a 0 1day
+          set-threshold bytesouta2n 0 1day
+          set-threshold bytesoutn2a 0 1day
+          set-threshold fmga2n 0 1day
+          set-threshold fmgn2a 0 1day
+          set-threshold fmrda2n 0 1day
+          set-threshold fmrdn2a 0 1day
+          set-threshold fmya2n 0 1day
+          set-threshold fmyn2a 0 1day
+          set-threshold ftda2n 0 1day
+          set-threshold ses 0 1day
+          set-threshold uas 10 1day
+          set-threshold fdhairpin 0 1day
+          set-threshold fdstaticblock 0 1day
+          set-threshold learntblentrydiscards 0 1day
+          set-threshold numlearntblflushes 0 1day
+          set-threshold ibra2nmax 0 1day
+          set-threshold ibrrla2nmax 0 1day
+          set-threshold ibra2nmin 0 1day
+          set-threshold ibrrla2nmin 0 1day
+          set-threshold ibra2n 0 1day
+          set-threshold ibrrla2n 0 1day
+          set-threshold ibrn2amax 0 1day
+          set-threshold ibrrln2amax 0 1day
+          set-threshold ibrn2amin 0 1day
+          set-threshold ibrrln2amin 0 1day
+          set-threshold ibrn2a 0 1day
+          set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-3-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      configure flow flow-1-1-1-3-1
+        configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+          buffersize 128
+          back
+        configure a2n-shaper a2n_shaper-1-1-1-3-1-0
+          pm
+            set-threshold bt 0 15min
+            set-threshold btd 0 15min
+            set-threshold fd 0 15min
+            set-threshold ftd 0 15min
+            set-threshold abrrl 0 15min
+            set-threshold bredd 0 15min
+            set-threshold fredd 0 15min
+            set-threshold bt 0 1day
+            set-threshold btd 0 1day
+            set-threshold fd 0 1day
+            set-threshold ftd 0 1day
+            set-threshold abrrl 0 1day
+            set-threshold bredd 0 1day
+            set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-3-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      configure flow flow-1-1-1-3-1
+        configure a2n-policer a2n_policer-1-1-1-3-1-0
+          eir 0
+          ebs 0
+          cir 0
+          cbs 0
+          color-marking enabled
+          color-mode color-aware
+          coupling-flag enabled
+          back
+        configure a2n-policer a2n_policer-1-1-1-3-1-0
+          pm
+            set-threshold fmg 0 15min
+            set-threshold fmy 0 15min
+            set-threshold fmrd 0 15min
+            set-threshold abr 0 15min
+            set-threshold bytesin 0 15min
+            set-threshold bytesout 0 15min
+            set-threshold fmg 0 1day
+            set-threshold fmy 0 1day
+            set-threshold fmrd 0 1day
+            set-threshold abr 0 1day
+            set-threshold bytesin 0 1day
+            set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-3-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      configure flow flow-1-1-1-3-1
+        configure n2a-policer n2a_policer-1-1-1-3-1-0
+          pm
+            set-threshold fmg 0 15min
+            set-threshold fmy 0 15min
+            set-threshold fmrd 0 15min
+            set-threshold abr 0 15min
+            set-threshold bytesin 0 15min
+            set-threshold bytesout 0 15min
+            set-threshold fmg 0 1day
+            set-threshold fmy 0 1day
+            set-threshold fmrd 0 1day
+            set-threshold abr 0 1day
+            set-threshold bytesin 0 1day
+            set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-3-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      configure n2a-shaper port_n2a_shaper-1-1-1-3-0
+        pm
+          set-threshold bt 0 15min
+          set-threshold btd 0 15min
+          set-threshold fd 0 15min
+          set-threshold ftd 0 15min
+          set-threshold abrrl 0 15min
+          set-threshold bredd 0 15min
+          set-threshold fredd 0 15min
+          set-threshold bt 0 1day
+          set-threshold btd 0 1day
+          set-threshold fd 0 1day
+          set-threshold ftd 0 1day
+          set-threshold abrrl 0 1day
+          set-threshold bredd 0 1day
+          set-threshold fredd 0 1day
+#
+#CLI:FLOW-1-1-1-4-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      configure flow flow-1-1-1-4-1
+        admin-state in-service
+        itag none
+        circuit-name ""
+        es-frame-loss-threshold 1
+        ses-frame-loss-threshold-ratio 30
+        network-interface network-1-1-1-1 push 500-0 none
+        a2n-shaping-type flow-based
+        policing enabled
+        policing-control a2n-n2a
+        net-to-acc-rate-limiting disabled
+        default-cos 0
+        priority-mapping-profile none
+        pbb-frames disabled
+        n2n-forwarding disabled
+        cpd-filter isl pass-thru
+        cpd-filter pagp pass-thru
+        cpd-filter udld pass-thru
+        cpd-filter cdp pass-thru
+        cpd-filter vtp pass-thru
+        cpd-filter dtp pass-thru
+        cpd-filter pvstp+ pass-thru
+        cpd-filter uplinkfast pass-thru
+        cpd-filter vlan-bridge pass-thru
+        cpd-filter l2pt pass-thru
+        cpd-filter bpdu pass-thru
+        cpd-filter pause pass-thru
+        cpd-filter lacp pass-thru
+        cpd-filter lacp-marker pass-thru
+        cpd-filter efm-oam pass-thru
+        cpd-filter ssm discard
+        cpd-filter port-authen pass-thru
+        cpd-filter lan-bridges pass-thru
+        cpd-filter gmrp pass-thru
+        cpd-filter gvrp pass-thru
+        cpd-filter garp pass-thru
+        cpd-filter elmi pass-thru
+        cpd-filter 01-80-c2-00-00-00 discard
+        cpd-filter 01-80-c2-00-00-01 discard
+        cpd-filter 01-80-c2-00-00-02 discard
+        cpd-filter 01-80-c2-00-00-03 discard
+        cpd-filter 01-80-c2-00-00-04 discard
+        cpd-filter 01-80-c2-00-00-05 discard
+        cpd-filter 01-80-c2-00-00-06 discard
+        cpd-filter 01-80-c2-00-00-07 discard
+        cpd-filter 01-80-c2-00-00-08 discard
+        cpd-filter 01-80-c2-00-00-09 discard
+        cpd-filter 01-80-c2-00-00-0a discard
+        cpd-filter 01-80-c2-00-00-0b discard
+        cpd-filter 01-80-c2-00-00-0c discard
+        cpd-filter 01-80-c2-00-00-0d discard
+        cpd-filter 01-80-c2-00-00-0e discard
+        cpd-filter 01-80-c2-00-00-0f discard
+        cpd-filter nearest-lldp discard
+        cpd-filter non-tpmr-lldp discard
+        cpd-filter customer-lldp discard
+        pm
+          set-threshold abra2n 0 15min
+          set-threshold abrrla2n 0 15min
+          set-threshold abrn2a 0 15min
+          set-threshold abrrln2a 0 15min
+          set-threshold l2cpfd 0 15min
+          set-threshold bytesina2n 0 15min
+          set-threshold bytesinn2a 0 15min
+          set-threshold bytesouta2n 0 15min
+          set-threshold bytesoutn2a 0 15min
+          set-threshold fmga2n 0 15min
+          set-threshold fmgn2a 0 15min
+          set-threshold fmrda2n 0 15min
+          set-threshold fmrdn2a 0 15min
+          set-threshold fmya2n 0 15min
+          set-threshold fmyn2a 0 15min
+          set-threshold ftda2n 0 15min
+          set-threshold ses 0 15min
+          set-threshold uas 10 15min
+          set-threshold fdhairpin 0 15min
+          set-threshold fdstaticblock 0 15min
+          set-threshold learntblentrydiscards 0 15min
+          set-threshold numlearntblflushes 0 15min
+          set-threshold ibra2nmax 0 15min
+          set-threshold ibrrla2nmax 0 15min
+          set-threshold ibra2nmin 0 15min
+          set-threshold ibrrla2nmin 0 15min
+          set-threshold ibra2n 0 15min
+          set-threshold ibrrla2n 0 15min
+          set-threshold ibrn2amax 0 15min
+          set-threshold ibrrln2amax 0 15min
+          set-threshold ibrn2amin 0 15min
+          set-threshold ibrrln2amin 0 15min
+          set-threshold ibrn2a 0 15min
+          set-threshold ibrrln2a 0 15min
+          set-threshold abra2n 0 1day
+          set-threshold abrrla2n 0 1day
+          set-threshold abrn2a 0 1day
+          set-threshold abrrln2a 0 1day
+          set-threshold l2cpfd 0 1day
+          set-threshold bytesina2n 0 1day
+          set-threshold bytesinn2a 0 1day
+          set-threshold bytesouta2n 0 1day
+          set-threshold bytesoutn2a 0 1day
+          set-threshold fmga2n 0 1day
+          set-threshold fmgn2a 0 1day
+          set-threshold fmrda2n 0 1day
+          set-threshold fmrdn2a 0 1day
+          set-threshold fmya2n 0 1day
+          set-threshold fmyn2a 0 1day
+          set-threshold ftda2n 0 1day
+          set-threshold ses 0 1day
+          set-threshold uas 10 1day
+          set-threshold fdhairpin 0 1day
+          set-threshold fdstaticblock 0 1day
+          set-threshold learntblentrydiscards 0 1day
+          set-threshold numlearntblflushes 0 1day
+          set-threshold ibra2nmax 0 1day
+          set-threshold ibrrla2nmax 0 1day
+          set-threshold ibra2nmin 0 1day
+          set-threshold ibrrla2nmin 0 1day
+          set-threshold ibra2n 0 1day
+          set-threshold ibrrla2n 0 1day
+          set-threshold ibrn2amax 0 1day
+          set-threshold ibrrln2amax 0 1day
+          set-threshold ibrn2amin 0 1day
+          set-threshold ibrrln2amin 0 1day
+          set-threshold ibrn2a 0 1day
+          set-threshold ibrrln2a 0 1day
+#
+#CLI:A2N SHAPER-1-1-1-4-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      configure flow flow-1-1-1-4-1
+        configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+          buffersize 128
+          back
+        configure a2n-shaper a2n_shaper-1-1-1-4-1-0
+          pm
+            set-threshold bt 0 15min
+            set-threshold btd 0 15min
+            set-threshold fd 0 15min
+            set-threshold ftd 0 15min
+            set-threshold abrrl 0 15min
+            set-threshold bredd 0 15min
+            set-threshold fredd 0 15min
+            set-threshold bt 0 1day
+            set-threshold btd 0 1day
+            set-threshold fd 0 1day
+            set-threshold ftd 0 1day
+            set-threshold abrrl 0 1day
+            set-threshold bredd 0 1day
+            set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-1-4-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      configure flow flow-1-1-1-4-1
+        configure a2n-policer a2n_policer-1-1-1-4-1-0
+          ebs 1024
+          eir 1000000000
+          cir 0
+          cbs 0
+          color-marking enabled
+          color-mode color-aware
+          coupling-flag enabled
+          back
+        configure a2n-policer a2n_policer-1-1-1-4-1-0
+          pm
+            set-threshold fmg 0 15min
+            set-threshold fmy 0 15min
+            set-threshold fmrd 0 15min
+            set-threshold abr 0 15min
+            set-threshold bytesin 0 15min
+            set-threshold bytesout 0 15min
+            set-threshold fmg 0 1day
+            set-threshold fmy 0 1day
+            set-threshold fmrd 0 1day
+            set-threshold abr 0 1day
+            set-threshold bytesin 0 1day
+            set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-1-4-1-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      configure flow flow-1-1-1-4-1
+        configure n2a-policer n2a_policer-1-1-1-4-1-0
+          pm
+            set-threshold fmg 0 15min
+            set-threshold fmy 0 15min
+            set-threshold fmrd 0 15min
+            set-threshold abr 0 15min
+            set-threshold bytesin 0 15min
+            set-threshold bytesout 0 15min
+            set-threshold fmg 0 1day
+            set-threshold fmy 0 1day
+            set-threshold fmrd 0 1day
+            set-threshold abr 0 1day
+            set-threshold bytesin 0 1day
+            set-threshold bytesout 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-1-4-0  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      configure n2a-shaper port_n2a_shaper-1-1-1-4-0
+        pm
+          set-threshold bt 0 15min
+          set-threshold btd 0 15min
+          set-threshold fd 0 15min
+          set-threshold ftd 0 15min
+          set-threshold abrrl 0 15min
+          set-threshold bredd 0 15min
+          set-threshold fredd 0 15min
+          set-threshold bt 0 1day
+          set-threshold btd 0 1day
+          set-threshold fd 0 1day
+          set-threshold ftd 0 1day
+          set-threshold abrrl 0 1day
+          set-threshold bredd 0 1day
+          set-threshold fredd 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      lpbk
+        rls-lpbk
+#
+#CLI:NETWORK PORT-1-1-1-2  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      lpbk
+        rls-lpbk
+#
+#CLI:CFM CNTRL  Edit
+#
+home
+configure cfm
+  signal-fail-defect-list rdi,rem-ccm
+#
+#CLI:CFM SYSDEF MDLVL-1  Edit
+#
+home
+configure cfm
+  configure sysdef-md
+    md-level 0
+    mhf none
+#
+#CLI:USB DCN-1-1-1-1  Edit
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure usb
+      alias ""
+      apn ""
+      dial-number ""
+      redial-timer 10
+#
+#CLI:SYSTEM FEATURE-1  Edit
+#
+home
+admin sw-license
+  configure feature "PBB" disabled
+#
+#CLI:LLDP SYS  Edit
+#
+home
+configure system
+  lldp
+    trans-interval 30
+    holdtime-multiplier 4
+    reinit-delay 2
+    notification-interval 30
+    tx-credit-max 5
+    message-fast-tx 1
+    tx-fast-init 4
+    max-neighbor-action discard-new
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-3-1  Create
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-3
+      lldp
+        add acc-port-config 1
+        back
+      lldp
+        configure acc-port-config 1
+          admin-status disabled
+          snmp-notification disabled
+          basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-1-4-1  Create
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure access-port access-1-1-1-4
+      lldp
+        add acc-port-config 1
+        back
+      lldp
+        configure acc-port-config 1
+          admin-status disabled
+          snmp-notification disabled
+          basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-1  Create
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-1
+      lldp
+        add net-port-config 1
+        back
+      lldp
+        configure net-port-config 1
+          admin-status disabled
+          snmp-notification disabled
+          basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-1  Create
+#
+home
+network-element ne-1
+  configure nte nte112-1-1-1
+    configure network-port network-1-1-1-2
+      lldp
+        add net-port-config 1
+        back
+      lldp
+        configure net-port-config 1
+          admin-status disabled
+          snmp-notification disabled
+          basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:SAT CONTROL-1-1  Edit
+#
+home
+configure sat
+  network-element ne-1
+    configure sat-ctrl sat_control-1-1
+      name ""
+      test-mode one-way
+      test-procedure cir,eir,policing,performance
+      test-duration 20
+      step-duration 20
+      step-num 1
+      perf-test-duration 15
+      flpdu-tag-override disabled
+#
+#CLI:IP SYSTEM  Create
+#
+home
+configure communication
+  add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.133 "MGMT" 1 disabled
+#end
+home
+admin config-file
+# NetworkElement
+# ADVA-NE-1--> show slot-info 1
+#                Slot Type : generic-slot
+#                Card Type : nte112
+#     Physical Entity Name : FSP150CC-GE112
+#              MAC Address : 00:80:ea:73:cd:a0
+#        Software Revision : 7.1.1-400
+#        Firmware Revision : 81127l
+#        Hardware Revision : 1.01
+#                      USI : LBADVA71153607687
+#                CLEI Code : Pending
+#              Part Number : 1078904600-01
+#        Manufacturer Date : 2015-09-14
+#        Manufacturer Site : Shenzhen
Index: configs/core4.okc.onenet.net
===================================================================
--- configs/core4.okc.onenet.net	(revision 138621)
+++ configs/core4.okc.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at OKC-CORE4-MX480-RE0> show system commit 
+#   2016-01-07 17:18:05 CST by andrew via cli commit synchronize
 #   2016-01-07 10:42:17 CST by sean via cli commit synchronize
 #   2016-01-07 10:40:19 CST by sean via cli commit synchronize
 #   2016-01-04 14:32:53 CST by sean via cli commit synchronize
 #   2016-01-04 14:16:36 CST by andrew via cli commit confirmed, rollback in 3mins synchronize
 #   2016-01-04 12:11:33 CST by sean via cli commit synchronize
-#   2016-01-04 12:05:48 CST by sean via cli commit synchronize
 # grnoc-mon at OKC-CORE4-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -428,7 +428,7 @@
 # grnoc-mon at OKC-CORE4-MX480-RE0> show system uptime 
 # System booted: 2014-09-16 23:49 CDT 
 # Protocols started: 2014-09-16 23:51 CDT 
-# Last configured: 2016-01-07 10:42 CST  by sean
+# Last configured: 2016-01-07 17:18 CST  by andrew
 # 
 # {master}
 # grnoc-mon at OKC-CORE4-MX480-RE0> show interface terse 
@@ -919,7 +919,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at OKC-CORE4-MX480-RE0> show configuration 
-## Last commit: 2016-01-07 10:42:17 CST by sean
+## Last commit: 2016-01-07 17:18:05 CST by andrew
 version 12.3R7.7;
 groups {
     re0 {
@@ -4932,7 +4932,7 @@
             }
         }
         unit 502 {
-            description "PIEDMONT-PS-1G-CIR0019066 [ORDERED]";
+            description PIEDMONT-PS-1G-CIR0019066;
             bandwidth 1g;
             vlan-tags outer 502 inner 500;
             family inet {
@@ -5083,7 +5083,7 @@
             vlan-tags outer 502 inner 501;
         }
         unit 3502 {
-            description "PIEDMONT-PS-NID-MGMT-CIR0019066 [ORDERED]";
+            description PIEDMONT-PS-NID-MGMT-CIR0019066;
             vlan-tags outer 502 inner 80;
             family inet {
                 mtu 1500;
Index: configs/maysville-hs.client.onenet.net
===================================================================
--- configs/maysville-hs.client.onenet.net	(revision 138623)
+++ configs/maysville-hs.client.onenet.net	(working copy)
@@ -45,7 +45,6 @@
 #     Serial ID                      ACLC7669
 # 
 # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis scb 
-# show chassis sfm detail
 # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis sfm detail
 # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis ssb 
 # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show system boot-messages 
Index: configs/meeker-ps.client.onenet.net
===================================================================
--- configs/meeker-ps.client.onenet.net	(revision 138616)
+++ configs/meeker-ps.client.onenet.net	(working copy)
@@ -114,6 +114,7 @@
 # total files: 1
 # 
 # grnoc-mon at MEEKER-PS-LEASED-ASSET-TAG-004947> show system uptime 
+# show interface terse
 # System booted: 2015-10-28 11:27 CDT 
 # Protocols started: 2015-10-28 11:30 CDT 
 # Last configured: 2015-12-14 15:34 CST  by sean
@@ -171,6 +172,7 @@
 #vlan.3 up up
 #vlan.999 up down
 # grnoc-mon at MEEKER-PS-LEASED-ASSET-TAG-004947> show configuration 
+show ospf neighbor
 ## Last commit: 2015-12-14 15:34:07 CST by sean
 version 12.1X44-D35.5;
 system {
Index: configs/smithville-ps.client.onenet.net
===================================================================
--- configs/smithville-ps.client.onenet.net	(revision 138175)
+++ configs/smithville-ps.client.onenet.net	(working copy)
@@ -114,8 +114,8 @@
 # total files: 1
 # 
 # grnoc-mon at SMITHVILLE-PS-LR-004893> show system uptime 
-# System booted: 2015-12-27 05:35 CST 
-# Protocols started: 2015-12-27 05:38 CST 
+# System booted: 2016-01-07 17:22 CST 
+# Protocols started: 2016-01-07 17:25 CST 
 # Last configured: 2015-10-06 21:43 CDT  by andrew
 # 
 # grnoc-mon at SMITHVILLE-PS-LR-004893> show interface terse 
Index: configs/hub.tsb.onenet.net
===================================================================
--- configs/hub.tsb.onenet.net	(revision 138623)
+++ configs/hub.tsb.onenet.net	(working copy)
@@ -199,7 +199,7 @@
 # -rw-rw----  1 root  field   51994624 Oct 24  2013 ifinfo.core.1
 # -rw-rw----  1 root  field   51974144 Oct 24  2013 ifinfo.core.2
 # -rw-rw----  1 root  field   52744192 Oct 24  2013 ifinfo.core.3
-# -rw-rw----  1 root  field   52727808 Jan 7  16:57 ifinfo.core.4
+# -rw-rw----  1 root  field   52727808 Jan 7  17:56 ifinfo.core.4
 # drwxrwxrwx  2 root  wheel        512 Oct 12  2012 install/
 # -rw-rw----  1 root  field   33464320 Mar 3   2014 jdiameterd.core.0
 # -rw-r--r--  1 eng   field   99542994 Apr 23  2013 jinstall-ppc-11.4R7.5-domestic-signed.tgz
Index: configs/hub.ida.onenet.net
===================================================================
--- configs/hub.ida.onenet.net	(revision 138623)
+++ configs/hub.ida.onenet.net	(working copy)
@@ -364,8 +364,8 @@
 #t1-2/0/3:25.17 up up
 #t1-2/0/3:26 up up
 #t1-2/0/3:26.0 up up
-#t1-2/0/3:27 up down
-#t1-2/0/3:27.0 up down
+#t1-2/0/3:27 up up
+#t1-2/0/3:27.0 up up
 #t1-2/0/3:28 up up
 #t1-2/0/3:28.0 up up
 #fe-2/1/0 up down
Index: routers.all
===================================================================
--- routers.all	(revision 138619)
+++ routers.all	(working copy)
@@ -323,6 +323,7 @@
 ore5.okc.onenet.net:cisco
 ore6.okc.onenet.net:cisco
 panola-ps.client.onenet.net:juniper
+piedmont-ps-ge112.nid.onenet.net:fsp150
 pioneer-tech-ash-srx220-mr.client.onenet.net:juniper
 pioneer-tech-ponc-srx220.client.onenet.net:juniper
 porum-ps.client.onenet.net:juniper



More information about the Nocrancid mailing list