[Nocrancid] autopop-onenet.net router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Wed May 11 18:03:27 CDT 2016
Index: configs/odmhsas-camhc-hugo.client.onenet.net
===================================================================
--- configs/odmhsas-camhc-hugo.client.onenet.net (revision 142605)
+++ configs/odmhsas-camhc-hugo.client.onenet.net (working copy)
@@ -1,9 +1,9 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at ODMHSAS-CARL-ALBERT-MHC-HUGO-SRX220> show system commit
+# show chassis environment
# 2016-05-02 09:33:16 CDT by admin via cli
# 2015-04-21 19:18:58 CDT by admin via cli commit confirmed, rollback in 3mins
-# show chassis environment
# 2015-04-17 17:47:53 CDT by admin via cli commit confirmed, rollback in 10mins
# 2015-04-16 22:43:28 CDT by admin via cli commit confirmed, rollback in 3mins
# 2015-03-03 00:28:54 CST by root via cli
@@ -15,18 +15,19 @@
# Fans SRX220 Chassis fan 0 OK
# SRX220 Chassis fan 1 OK
# Power Power Supply 0 OK
-# show chassis firmware
#
# grnoc-mon at ODMHSAS-CARL-ALBERT-MHC-HUGO-SRX220> show chassis firmware
# Part Type Version
# FPC 0 O/S Version 12.1X46-D20.5 by builder on 2014-05
# FPC 1 O/S Version 12.1X46-D20.5 by builder on 2014-05
# FWDD O/S Version 12.1X46-D20.5 by builder on 2014-05
+# show chassis fpc detail
#
# grnoc-mon at ODMHSAS-CARL-ALBERT-MHC-HUGO-SRX220> show chassis fpc detail
# Slot 0 information:
# State Online
# Total CPU DRAM ---- CPU less FPC ----
+# show chassis hardware
# Slot 1 information:
# State Online
# Total CPU DRAM ---- CPU less FPC ----
@@ -35,6 +36,7 @@
# Hardware inventory:
# Item Version Part number Serial number Description
# Chassis CF4014AK0002 SRX220H2
+# show chassis hardware models
# Routing Engine REV 05 750-048778 ACLS9024 RE-SRX220H2
# FPC 0 FPC
# PIC 0 8x GE Base PIC
Index: configs/hub.dur.onenet.net
===================================================================
--- configs/hub.dur.onenet.net (revision 142605)
+++ configs/hub.dur.onenet.net (working copy)
@@ -357,7 +357,7 @@
#fe-2/1/1.0 up up
#fe-2/1/2 up up
#fe-2/1/2.0 up up
-#fe-2/1/3 down up
+#fe-2/1/3 down down
#ge-2/2/0 down down
#pc-2/2/0 up up
#pc-2/2/0.16383 up up
Index: configs/hub.bar.onenet.net
===================================================================
--- configs/hub.bar.onenet.net (revision 142605)
+++ configs/hub.bar.onenet.net (working copy)
@@ -350,8 +350,8 @@
#t1-2/0/2:24.0 up up
#t1-2/0/2:25 up up
#t1-2/0/2:25.0 up up
-#t1-2/0/2:26 up down
-#t1-2/0/2:26.0 up down
+#t1-2/0/2:26 up up
+#t1-2/0/2:26.0 up up
#t1-2/0/2:27 down down
#t1-2/0/2:28 up up
#t1-2/0/2:28.0 up up
Index: configs/core4.okc.onenet.net
===================================================================
--- configs/core4.okc.onenet.net (revision 142603)
+++ configs/core4.okc.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at OKC-CORE4-MX480-RE0> show system commit
+# 2016-05-11 17:30:58 CDT by andrew via cli commit synchronize
+# 2016-05-11 17:19:09 CDT by andrew via cli commit synchronize
# 2016-05-11 15:07:32 CDT by andrew via cli commit synchronize
# 2016-05-11 14:57:07 CDT by andrew via cli commit synchronize
# 2016-05-11 14:54:28 CDT by andrew via cli commit synchronize
# 2016-05-11 09:20:10 CDT by andrew via cli commit synchronize
-# 2016-05-10 16:03:04 CDT by andrew via cli commit synchronize
-# 2016-05-09 14:43:24 CDT by sky via cli commit synchronize
# grnoc-mon at OKC-CORE4-MX480-RE0> show chassis environment
# Class Item Status Measurement
# Temp PEM 0 OK
@@ -429,7 +429,7 @@
# grnoc-mon at OKC-CORE4-MX480-RE0> show system uptime
# System booted: 2014-09-16 23:49 CDT
# Protocols started: 2014-09-16 23:51 CDT
-# Last configured: 2016-05-11 15:07 CDT by andrew
+# Last configured: 2016-05-11 17:30 CDT by andrew
#
# {master}
# grnoc-mon at OKC-CORE4-MX480-RE0> show interface terse
@@ -542,6 +542,7 @@
#xe-0/0/1.362 up up
#xe-0/0/1.1162 up up
#xe-0/0/1.1168 up up
+#xe-0/0/1.1210 up up
#xe-0/0/1.1253 up up
#xe-0/0/1.1268 up up
#xe-0/0/1.2050 up up
@@ -813,7 +814,6 @@
#xe-2/0/1.926 up up
#xe-2/0/1.2828 up up
#xe-2/0/1.3828 up up
-#xe-2/0/1.4828 up up
#xe-2/0/1.32767 up up
#xe-2/1/0 up up
#xe-2/1/0.500 up up
@@ -946,6 +946,7 @@
#lsi.1054520 up up
#lsi.1054521 up up
#lsi.1054522 up up
+#lsi.1054523 up up
#mtun up up
#pimd up up
#pime up up
@@ -953,7 +954,7 @@
#pp0 up up
#tap up up
# grnoc-mon at OKC-CORE4-MX480-RE0> show configuration
-## Last commit: 2016-05-11 15:07:32 CDT by andrew
+## Last commit: 2016-05-11 17:30:58 CDT by andrew
version 12.3R7.7;
groups {
re0 {
@@ -2522,6 +2523,12 @@
input-vlan-map pop;
output-vlan-map push;
}
+ unit 1210 {
+ encapsulation vlan-ccc;
+ vlan-tags outer 210 inner 501;
+ input-vlan-map pop;
+ output-vlan-map push;
+ }
unit 1253 {
description ODMHSAS-LELAND-WOLF-CENTER-NORMAN-L3VPN-1G-CIR0006114;
bandwidth 1g;
@@ -4852,13 +4859,6 @@
address 10.199.192.105/30;
}
}
- unit 4828 {
- description "RFC2544 TESTING [NO-MONITOR]";
- encapsulation vlan-ccc;
- vlan-tags outer 828 inner 777;
- input-vlan-map pop;
- output-vlan-map push;
- }
}
xe-2/1/0 {
description "CORE 10G to SWI.OKCPS xe-0/1/0 | OneNet-OKC-OKL113OKC-5904";
@@ -6305,9 +6305,9 @@
ignore-mtu-mismatch;
}
}
- neighbor 164.58.199.194 {
- interface xe-2/0/1.4828 {
- virtual-circuit-id 7777;
+ neighbor 164.58.199.68 {
+ interface xe-0/0/1.1210 {
+ virtual-circuit-id 69;
ignore-encapsulation-mismatch;
ignore-mtu-mismatch;
}
Index: configs/core1.dc.onenet.net
===================================================================
--- configs/core1.dc.onenet.net (revision 142533)
+++ configs/core1.dc.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at MX480_DC_01_RE0> show system commit
+# 2016-05-11 17:29:08 CDT by andrew via cli commit synchronize
+# 2016-05-11 17:18:04 CDT by andrew via cli commit synchronize
# 2016-05-05 08:53:42 CDT by joel via cli commit synchronize
# 2016-04-21 07:46:56 CDT by andrew via cli commit confirmed, rollback in 3mins synchronize
# 2016-04-21 07:39:16 CDT by andrew via cli commit confirmed, rollback in 5mins synchronize
# 2016-04-21 07:37:50 CDT by andrew via cli commit confirmed, rollback in 3mins synchronize
-# 2016-04-20 22:08:23 CDT by andrew via cli commit confirmed, rollback in 3mins synchronize
-# 2016-04-14 19:21:17 CDT by andrew via cli commit synchronize
# grnoc-mon at MX480_DC_01_RE0> show chassis environment
# Class Item Status Measurement
# Temp PEM 0 OK
@@ -443,7 +443,7 @@
# grnoc-mon at MX480_DC_01_RE0> show system uptime
# System booted: 2014-08-25 20:38 CDT
# Protocols started: 2014-08-25 20:39 CDT
-# Last configured: 2016-05-05 08:53 CDT by joel
+# Last configured: 2016-05-11 17:29 CDT by andrew
#
# {master}
# grnoc-mon at MX480_DC_01_RE0> show interface terse
@@ -942,7 +942,7 @@
#pp0 up up
#tap up up
# grnoc-mon at MX480_DC_01_RE0> show configuration
-## Last commit: 2016-05-05 08:53:42 CDT by joel
+## Last commit: 2016-05-11 17:29:08 CDT by andrew
version 12.3R7.7;
groups {
re0 {
Index: configs/maysville-hs.client.onenet.net
===================================================================
--- configs/maysville-hs.client.onenet.net (revision 142605)
+++ configs/maysville-hs.client.onenet.net (working copy)
@@ -46,10 +46,8 @@
# Serial ID ACLC7669
#
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis scb
-# show chassis sfm detail
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis sfm detail
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show chassis ssb
-# show system boot-messages
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show system boot-messages
# kld_map_v: 0x8ff80000, kld_map_p: 0x0
# Copyright (c) 1996-2014, Juniper Networks, Inc.
@@ -114,11 +112,10 @@
# WARNING: / was not properly dismounted
#
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show version
-# Hostname: MAYSVILLE-HS-LEASED-ASSET-TAG-004887 # Model: srx240h2 # file list /var/tmp detail # JUNOS Software Release [12.1X44-D35.5] # # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> file list /var/tmp detail # lrw-r--r-- 1 root wheel 11 May 19 2014 /var/tmp@ -> /cf/var/tmp
+# Hostname: MAYSVILLE-HS-LEASED-ASSET-TAG-004887 # Model: srx240h2 # JUNOS Software Release [12.1X44-D35.5] # # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> file list /var/tmp detail # lrw-r--r-- 1 root wheel 11 May 19 2014 /var/tmp@ -> /cf/var/tmp
# total files: 1
#
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show system uptime
-# show interface terse
# System booted: 2016-04-26 11:51 CDT
# Protocols started: 2016-04-26 11:54 CDT
# Last configured: 2016-01-27 15:43 CST by joel
@@ -174,7 +171,6 @@
#vlan up up
#vlan.999 up down
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show configuration
-show ospf neighbor
## Last commit: 2016-01-27 15:43:17 CST by joel
version 12.1X44-D35.5;
system {
@@ -602,7 +598,6 @@
# OSPF instance is not running
#
# grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show bfd session
-quit
0 sessions, 0 clients
Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/meeker-ps.client.onenet.net
===================================================================
--- configs/meeker-ps.client.onenet.net (revision 142603)
+++ configs/meeker-ps.client.onenet.net (working copy)
@@ -1,7 +1,6 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at MEEKER-PS-LEASED-ASSET-TAG-004947> show system commit
-# show chassis environment
# 2015-12-14 15:34:07 CST by sean via cli
# 2015-11-20 10:50:09 CST by joel via cli
# 2015-11-20 10:48:21 CST by joel via cli
Index: configs/odmhsas-tmhc-lawton-pact.client.onenet.net
===================================================================
--- configs/odmhsas-tmhc-lawton-pact.client.onenet.net (revision 142583)
+++ configs/odmhsas-tmhc-lawton-pact.client.onenet.net (working copy)
@@ -166,6 +166,7 @@
system {
host-name ODMHSAS-TALIAFERRO-MHC-LAWTON-OTHER-SRX220;
domain-name onenet.net;
+show ospf neighbor
time-zone America/Chicago;
authentication-order [ radius password ];
ports {
Index: configs/onenet-dc-xg210.nid.onenet.net
===================================================================
--- configs/onenet-dc-xg210.nid.onenet.net (revision 141404)
+++ configs/onenet-dc-xg210.nid.onenet.net (working copy)
@@ -730,16 +730,6 @@
configure snmp
add community "public" readonly
#
-#CLI:XG 1S CC-1-1-2 Create
-#
-home
-network-element ne-1
- add eqpt xg_1s_cc 2
- back
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- admin-state in-service
-#
#CLI:NE-1 Edit
#
home
@@ -794,12 +784,12 @@
configure system
ecpa-streams 1
stream-name "stream-1"
- framesize 256
- rate 50048000
+ framesize 64
+ rate 5056000
payload-type fixed
dest-mac 00:0b:09:00:00:01
outer-vlan-control enabled
- outer-vlan-tag 999-0
+ outer-vlan-tag 501-0
outer-vlan-ethertype 0x8100
inner-vlan1-control disabled
inner-vlan1-tag 4094-1
@@ -1116,22 +1106,6 @@
test-stream-b 0
test-stream-c 0
#
-#CLI:ECPA CONTROL-1-1-2-1 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- ecpa-ctrl
- src-port access-1-1-2-1
- inject-direction a2n
- monitor-direction n2a
- test-type duration
- test-duration 00:00:01:00
- test-num-frames 1
- test-stream-a 1
- test-stream-b 0
- test-stream-c 0
-#
#CLI:SYNC-1-1-1-1 Edit
#
home
@@ -1178,227 +1152,6 @@
sa-bit bit4
ql-mode disabled
#
-#CLI:ACCESS PORT-1-1-2-1 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- admin-state maintenance
- service-type evpl
- port-shaped-speed 0
- port-shaping disabled
- sync-e-mode disabled
- ql-mode disabled
- expected-ql ql-none
- assumed-ql ql-eec1
- back
- configure access-port access-1-1-2-1
- lpbk
- inner-vlan1-control disabled
- inner-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan1-control disabled
- outer-vlan2-control disabled
- outer-vlan3-control disabled
- inner-vlan1 4094-0
- inner-vlan2 4094-1
- inner-vlan3 4094-2
- outer-vlan1 500-*
- outer-vlan2 601-*
- outer-vlan3 4094-2
- outer-vlan1-control enabled
- back
- back
- configure access-port access-1-1-2-1
- efm-oam
- oam-disp-type peer
- oam-control disabled
- oam-local-mode oam-active
- back
- back
- configure access-port access-1-1-2-1
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 1
- remote-link-ids none
- back
- back
- configure access-port access-1-1-2-1
- lpbk
- block enabled
- dst-mac-control disabled
- src-mac-control disabled
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada sada
- back
- back
- configure access-port access-1-1-2-1
- alias "Link to Customer [NO-MONITOR]"
- auto-diagnostic disabled
- mtu 9600
- phy-type lan
- wdmchannel not-tunable
- traffic-model access-flow
- ing-cos-prio outer-vlantag
- default-cos 0
- afp all-afp
- pcp-mode none
- rx-dei-outer-tag-type ctag-or-stag
- rx-dei-action use
- tx-dei-outer-tag-type stag
- tx-dei-action mark-color
- low-latency-queuing disabled
- port-vlan-id 1-0
- prio-map-mode 802.1p
- n2a-vlan-trunking enabled
- a2n-push-port-vid enabled
- n2a-pop-port-vid disabled
- a2n-swap-priority-vid disabled
- n2a-swap-priority-vid disabled
- swap-priority-vid 1
-home
-configure ptp
- network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- delay-asymmetry 0
- back
- configure access-port access-1-1-2-1
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter 01-80-c2-00-00-00 pass-thru
- cpd-filter 01-80-c2-00-00-01 pass-thru
- cpd-filter 01-80-c2-00-00-02 pass-thru
- cpd-filter 01-80-c2-00-00-03 pass-thru
- cpd-filter 01-80-c2-00-00-04 pass-thru
- cpd-filter 01-80-c2-00-00-05 pass-thru
- cpd-filter 01-80-c2-00-00-06 pass-thru
- cpd-filter 01-80-c2-00-00-07 pass-thru
- cpd-filter 01-80-c2-00-00-08 pass-thru
- cpd-filter 01-80-c2-00-00-09 pass-thru
- cpd-filter 01-80-c2-00-00-0a pass-thru
- cpd-filter 01-80-c2-00-00-0b pass-thru
- cpd-filter 01-80-c2-00-00-0c pass-thru
- cpd-filter 01-80-c2-00-00-0d pass-thru
- cpd-filter 01-80-c2-00-00-0e pass-thru
- cpd-filter 01-80-c2-00-00-0f pass-thru
- cpd-filter nearest-lldp pass-thru
- cpd-filter customer-lldp use-mac-setting
- cpd-filter non-tpmr-lldp use-mac-setting
- back
- configure access-port access-1-1-2-1
- clb 1
- length 0.10
- description ""
- control disabled
- back
- back
- configure access-port access-1-1-2-1
- clb 2
- length 0.10
- description ""
- control disabled
- back
- back
- configure access-port access-1-1-2-1
- clb 3
- length 0.10
- description ""
- control disabled
- back
- back
- configure access-port access-1-1-2-1
- clb 4
- length 0.10
- description ""
- control disabled
- back
- back
- configure access-port access-1-1-2-1
- clb 5
- length 0.10
- description ""
- control disabled
- back
- back
- configure access-port access-1-1-2-1
- pm
- set-threshold abrrx 0 1day
- set-threshold abrtx 0 1day
- set-threshold aufd 0 1day
- set-threshold apfd 0 1day
- set-threshold esbf 0 1day
- set-threshold esbp 0 1day
- set-threshold esbs 0 1day
- set-threshold esc 0 1day
- set-threshold escae 3557280 1day
- set-threshold esde 3557280 1day
- set-threshold esf 3557280 1day
- set-threshold esfs 0 1day
- set-threshold esj 0 1day
- set-threshold esmf 0 1day
- set-threshold esmp 0 1day
- set-threshold eso 0 1day
- set-threshold esof 0 1day
- set-threshold esop 3557280 1day
- set-threshold esp 0 1day
- set-threshold esp64 0 1day
- set-threshold esp65 0 1day
- set-threshold esp128 0 1day
- set-threshold esp256 0 1day
- set-threshold esp512 0 1day
- set-threshold esp1024 0 1day
- set-threshold esp1519 0 1day
- set-threshold esuf 0 1day
- set-threshold esup 3557280 1day
- set-threshold l2cpfd 0 1day
- set-threshold l2cpfp 0 1day
- set-threshold lbc 0 1day
- set-threshold opr -80 1day
- set-threshold opr-variance 4 1day
- set-threshold opt -80 1day
- set-threshold opt-variance 4 1day
- set-threshold temp 0 1day
- set-threshold uas 0 1day
- set-threshold poprglitchrejs 0 1day
- set-threshold poprrtr 0 1day
- set-threshold poproor 0 1day
- set-threshold poproov 0 1day
- set-threshold l2pt-rxframes-encap 0 1day
- set-threshold l2pt-txframes-decap 0 1day
- set-threshold ibrmaxrx 0 1day
- set-threshold ibrmaxtx 0 1day
- set-threshold ibrminrx 0 1day
- set-threshold ibrmintx 0 1day
- set-threshold ibrrx 0 1day
- set-threshold ibrtx 0 1day
-#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
@@ -1667,6 +1420,7 @@
network-element ne-1
configure nte ntexg210-1-1-1
configure network-port network-1-1-1-2
+ admin-state in-service
media fiber fixed-10g-full
sync-e-mode disabled
ql-mode disabled
@@ -1885,19 +1639,6 @@
set-threshold pcs-cv 0 1day
set-threshold pcs-she 0 1day
#
-#CLI:ELMI ACCESS-1-1-2-1 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- elmi
- elmi-control disabled
- n393 4
- t392 15
- async-status enabled
- min-async-status-interval 1
-#
#CLI:ELMI NETWORK-1-1-1-1 Edit
#
home
@@ -1982,234 +1723,84 @@
configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
configure eth0 rip2Pkts-control disabled
#
-#CLI:FLOW-1-1-2-1-1 Create
+#CLI:PT FLOW-1-1 Create
#
home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- add flow flow-1-1-2-1-1 "" regular-evc disabled disabled disabled disabled 0 disabled none none "500-*,999-*" 0 10000000000 access-interface access-1-1-2-1 network-interface network-1-1-1-1
- back
- back
+ add passthru-flow pt_flow-1-1 "" regular-evc disabled disabled 0 "501-*" 0 10000000000
+ back
+network-element ne-1
+ configure passthru-flow pt_flow-1-1
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ default-cos 0
+ untagged-traffic disabled
+ outertag-prio-ctrl disabled
+ innertag-prio-ctrl disabled
+ n2a-outertag-prio-ctrl disabled
back
back
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- circuit-name ""
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- policing enabled
- policing-control a2n-n2a
- stag none
- net-to-acc-rate-limiting disabled
- default-cos 0
- ctag none
- untagged-traffic disabled
- outertag-prio-ctrl disabled
- innertag-prio-ctrl disabled
- n2a-outertag-prio-ctrl disabled
- access-learning-ctrl none
- access-max-forwarding-entries 16384
- protect-access-learning none
- network-learning-ctrl none
- network-max-forwarding-entries 16384
- protect-network-learning none
- aging-timer 300
- table-full-action forward
- n2n-forwarding disabled
- a2n-multicast-rate-limit-ctrl disabled
- a2n-broadcast-rate-limit-ctrl disabled
- a2n-combined-rate-limit-ctrl disabled
- set-sec-block disabled
- back
- configure flow flow-1-1-2-1-1
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter elmi pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter 01-80-c2-00-00-00 pass-thru
- cpd-filter 01-80-c2-00-00-01 pass-thru
- cpd-filter 01-80-c2-00-00-02 pass-thru
- cpd-filter 01-80-c2-00-00-03 pass-thru
- cpd-filter 01-80-c2-00-00-04 pass-thru
- cpd-filter 01-80-c2-00-00-05 pass-thru
- cpd-filter 01-80-c2-00-00-06 pass-thru
- cpd-filter 01-80-c2-00-00-07 pass-thru
- cpd-filter 01-80-c2-00-00-08 pass-thru
- cpd-filter 01-80-c2-00-00-09 pass-thru
- cpd-filter 01-80-c2-00-00-0a pass-thru
- cpd-filter 01-80-c2-00-00-0b pass-thru
- cpd-filter 01-80-c2-00-00-0c pass-thru
- cpd-filter 01-80-c2-00-00-0d pass-thru
- cpd-filter 01-80-c2-00-00-0e pass-thru
- cpd-filter 01-80-c2-00-00-0f pass-thru
- cpd-filter nearest-lldp pass-thru
- cpd-filter customer-lldp pass-thru
- cpd-filter non-tpmr-lldp pass-thru
- back
- configure flow flow-1-1-2-1-1
- pm
- set-threshold abra2n 0 1day
- set-threshold abrrla2n 0 1day
- set-threshold abrn2a 0 1day
- set-threshold abrrln2a 0 1day
- set-threshold l2cpfd 0 1day
- set-threshold bytesina2n 0 1day
- set-threshold bytesinn2a 0 1day
- set-threshold bytesouta2n 0 1day
- set-threshold bytesoutn2a 0 1day
- set-threshold es 0 1day
- set-threshold fmga2n 0 1day
- set-threshold fmgn2a 0 1day
- set-threshold fmrda2n 0 1day
- set-threshold fmrdn2a 0 1day
- set-threshold fmya2n 0 1day
- set-threshold fmyn2a 0 1day
- set-threshold ftda2n 0 1day
- set-threshold ses 0 1day
- set-threshold uas 0 1day
- set-threshold ibra2nmax 0 1day
- set-threshold ibrrla2nmax 0 1day
- set-threshold ibra2nmin 0 1day
- set-threshold ibrrla2nmin 0 1day
- set-threshold ibra2n 0 1day
- set-threshold ibrrla2n 0 1day
- set-threshold ibrn2amax 0 1day
- set-threshold ibrrln2amax 0 1day
- set-threshold ibrn2amin 0 1day
- set-threshold ibrrln2amin 0 1day
- set-threshold ibrn2a 0 1day
- set-threshold ibrrln2a 0 1day
- set-threshold fdhairpin 0 1day
- set-threshold fdstaticblock 0 1day
- set-threshold numlearntblflushes 0 1day
- set-threshold learntblentrydiscards 0 1day
- set-threshold a2nmcfd 0 1day
- set-threshold a2nbcfd 0 1day
+ configure passthru-flow pt_flow-1-1
+ n2n-policing disabled
+ auto-cir-bw-percent 100
+ loop-avoidance none
#
-#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#CLI:PT N2 POLICER-1-1-0 Edit
#
home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure a2n-shaper a2n_shaper-1-1-2-1-1-0
- buffersize 128
- back
- back
- configure flow flow-1-1-2-1-1
- configure a2n-shaper a2n_shaper-1-1-2-1-1-0
- soam-cir 0
- soam-eir 0
- back
- back
- back
+ configure passthru-flow pt_flow-1-1
+ configure n2-policer pt_n2_policer-1-1-0
+ color-mode color-aware
+ coupling-flag enabled
+ cbs 0
+ cir 0
+ ebs 1024
+ eir 10000000000
back
- back
- back
+ configure n2-policer pt_n2_policer-1-1-0
+ color-marking enabled
+#
+#CLI:PT N1 SHAPER-1-1-0 Edit
+#
+home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure a2n-shaper a2n_shaper-1-1-2-1-1-0
- pm
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
- set-threshold br 0 1day
- set-threshold fr 0 1day
- set-threshold abrrlr 0 1day
+ configure passthru-flow pt_flow-1-1
+ configure n1-shaper pt_n1_shaper-1-1-0
+ buffersize 128
#
-#CLI:A2N POLICER-1-1-2-1-1-0 Edit
+#CLI:PT N1 POLICER-1-1-0 Edit
#
home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure a2n-policer a2n_policer-1-1-2-1-1-0
- color-mode color-aware
- coupling-flag enabled
- cbs 0
- cir 0
- ebs 1024
- eir 10000000000
- back
- back
- configure flow flow-1-1-2-1-1
- configure a2n-policer a2n_policer-1-1-2-1-1-0
- color-marking enabled
- back
- back
- back
+ configure passthru-flow pt_flow-1-1
+ configure n1-policer pt_n1_policer-1-1-0
+ color-mode color-aware
+ coupling-flag enabled
+ cbs 0
+ cir 0
+ ebs 1024
+ eir 10000000000
back
- back
- back
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure a2n-policer a2n_policer-1-1-2-1-1-0
- pm
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmyd 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
+ configure n1-policer pt_n1_policer-1-1-0
+ color-marking enabled
#
-#CLI:N2A POLICER-1-1-2-1-1-0 Edit
+#CLI:PT N2 SHAPER-1-1-0 Edit
#
home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure n2a-policer n2a_policer-1-1-2-1-1-0
- pm
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmyd 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
+ configure passthru-flow pt_flow-1-1
+ configure n2-shaper pt_n2_shaper-1-1-0
+ buffersize 128
#
-#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#CLI:PT FLOW-1-1 Create
#
home
network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure flow flow-1-1-2-1-1
- configure a2n-shaper a2n_shaper-1-1-2-1-1-0
- buffersize 128
+ configure passthru-flow pt_flow-1-1
+ auto-bw-config enabled
#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
@@ -2243,31 +1834,6 @@
md-level 0
mhf none
#
-#CLI:PORT N2A SHAPER-1-1-2-1-0 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- configure n2a-shaper port_n2a_shaper-1-1-2-1-0
- buffersize 10
- back
- back
- configure access-port access-1-1-2-1
- configure n2a-shaper port_n2a_shaper-1-1-2-1-0
- soam-cir 0
- soam-eir 0
- back
- configure n2a-shaper port_n2a_shaper-1-1-2-1-0
- pm
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
-#
#CLI:DCN-1-1-1-1 Edit
#
home
@@ -2324,42 +1890,6 @@
tx-fast-init 4
max-neighbor-action discard-new
#
-#CLI:LLDP ACC PORT CONFIG-1-1-2-1-1 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- lldp
- configure acc-port-config lldp_acc_port_cfg-1-1-2-1-1
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
-#CLI:LLDP ACC PORT CONFIG-1-1-2-1-2 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- lldp
- configure acc-port-config lldp_acc_port_cfg-1-1-2-1-2
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
-#CLI:LLDP ACC PORT CONFIG-1-1-2-1-3 Edit
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- lldp
- configure acc-port-config lldp_acc_port_cfg-1-1-2-1-3
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Edit
#
home
More information about the Nocrancid
mailing list