[Nocrancid] autopop-onenet.net router config diffs

rancid at rancid.noc.onenet.net rancid at rancid.noc.onenet.net
Fri Nov 11 13:04:03 CST 2016


Index: configs/faye.okcdc.onenet.net
===================================================================
--- configs/faye.okcdc.onenet.net	(revision 148053)
+++ configs/faye.okcdc.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at FAYE-RP3F2-MX80> show system commit 
+#   2016-11-11 12:42:09 CST by andrew via cli
+#   2016-11-11 12:41:48 CST by root via other
+#   2016-11-11 12:38:06 CST by andrew via cli commit confirmed, rollback in 3mins
+#   2016-11-11 12:02:01 CST by andrew via cli
 #   2016-11-11 12:01:23 CST by andrew via cli
 #   2016-11-11 11:59:20 CST by andrew via cli
-#   2016-11-11 11:57:40 CST by andrew via cli
-#   2016-11-11 11:56:07 CST by andrew via cli
-#   2016-11-08 11:17:35 CST by andrew via cli
-#   2016-11-08 11:13:50 CST by andrew via cli commit confirmed, rollback in 3mins
 # grnoc-mon at FAYE-RP3F2-MX80> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -227,7 +227,7 @@
 # grnoc-mon at FAYE-RP3F2-MX80> show system uptime 
 # System booted: 2016-07-09 02:31 CDT 
 # Protocols started: 2016-07-09 02:34 CDT 
-# Last configured: 2016-11-11 12:01 CST  by andrew
+# Last configured: 2016-11-11 12:42 CST  by andrew
 # 
 # grnoc-mon at FAYE-RP3F2-MX80> show interface terse 
 #Interface Admin Link
@@ -241,6 +241,7 @@
 #xe-0/0/0.42 up up
 #xe-0/0/0.32767 up up
 #xe-0/0/1 up up
+#xe-0/0/1.400 up up
 #xe-0/0/1.32767 up up
 #xe-0/0/2 up down
 #xe-0/0/3 up down
@@ -252,7 +253,6 @@
 #ge-1/0/0.300 up up
 #ge-1/0/0.316 up up
 #ge-1/0/0.317 up up
-#ge-1/0/0.400 up up
 #ge-1/0/0.500 up up
 #ge-1/0/0.501 up down
 #ge-1/0/0.502 up up
@@ -352,7 +352,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at FAYE-RP3F2-MX80> show configuration 
-## Last commit: 2016-11-11 12:01:23 CST by andrew
+## Last commit: 2016-11-11 12:42:09 CST by andrew
 version 13.3R9.13;
 system {
     host-name FAYE-RP3F2-MX80;
@@ -516,6 +516,10 @@
         flexible-vlan-tagging;
         mtu 9192;
         encapsulation flexible-ethernet-services;
+        unit 400 {
+            encapsulation vlan-ccc;
+            vlan-id 400;
+        }
     }
     ge-1/0/0 {
         description "USER - D-102-C - FLOOR 1 - ANDREW";
@@ -585,10 +589,6 @@
                 address 172.20.3.1/24;
             }
         }
-        unit 400 {
-            encapsulation vlan-ccc;
-            vlan-id 400;
-        }
         unit 500 {
             encapsulation vlan-vpls;
             vlan-id 500;
@@ -734,7 +734,6 @@
         link-mode full-duplex;
         unit 0 {
             family inet {
-                address 10.199.192.25/30;
                 address 10.199.192.1/30;
             }
         }
@@ -989,7 +988,7 @@
             }
         }
         neighbor 164.58.199.234 {
-            interface ge-1/0/0.400 {
+            interface xe-0/0/1.400 {
                 virtual-circuit-id 6969;
                 ignore-encapsulation-mismatch;
                 ignore-mtu-mismatch;
Index: configs/canadian-ps.client.onenet.net
===================================================================
--- configs/canadian-ps.client.onenet.net	(revision 148053)
+++ configs/canadian-ps.client.onenet.net	(working copy)
@@ -171,7 +171,7 @@
 #vlan.3 up up
 #vlan.999 up down
 # grnoc-mon at CANADIAN-PS-SRX240-LR-004907> show configuration 
-warning: error writing(valid) /var/db/feature.db: expecting 9204 bytes, only wrote 0
+warning: error writing(valid) /var/db/feature.db: expecting 9205 bytes, only wrote 0
 ## Last commit: 2016-06-23 13:05:01 CDT by admin
 version 12.1X46-D20.5;
 system {
Index: configs/hub.dur.onenet.net
===================================================================
--- configs/hub.dur.onenet.net	(revision 148053)
+++ configs/hub.dur.onenet.net	(working copy)
@@ -329,7 +329,7 @@
 #fe-2/1/1.0 up up
 #fe-2/1/2 up up
 #fe-2/1/2.0 up up
-#fe-2/1/3 down up
+#fe-2/1/3 down down
 #ge-2/2/0 down down
 #pc-2/2/0 up up
 #pc-2/2/0.16383 up up
Index: configs/stringtown-high-school.client.onenet.net
===================================================================
--- configs/stringtown-high-school.client.onenet.net	(revision 148051)
+++ configs/stringtown-high-school.client.onenet.net	(working copy)
@@ -674,6 +674,7 @@
 # OSPF instance is not running
 # 
 # grnoc-mon at STRINGTOWN-HIGH-SCHOOL-TAG-004909> show bfd session 
+quit
 
 0 sessions, 0 clients
 Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/odot-stillwater-residence.client.onenet.net
===================================================================
--- configs/odot-stillwater-residence.client.onenet.net	(revision 148029)
+++ configs/odot-stillwater-residence.client.onenet.net	(working copy)
@@ -123,8 +123,8 @@
 #sp-0/0/0.16383 up up
 #ge-0/0/1 up up
 #ge-0/0/1.0 up up
-#ge-0/0/2 up down
-#ge-0/0/2.0 up down
+#ge-0/0/2 up up
+#ge-0/0/2.0 up up
 #ge-0/0/3 up up
 #ge-0/0/3.0 up up
 #ge-0/0/4 up up
Index: configs/maysville-hs.client.onenet.net
===================================================================
--- configs/maysville-hs.client.onenet.net	(revision 148053)
+++ configs/maysville-hs.client.onenet.net	(working copy)
@@ -598,8 +598,8 @@
 # OSPF instance is not running
 # 
 # grnoc-mon at MAYSVILLE-HS-LEASED-ASSET-TAG-004887> show bfd session 
+
 quit
-
 0 sessions, 0 clients
 Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
 
Index: configs/onenet-dc-xg210.nid.onenet.net
===================================================================
--- configs/onenet-dc-xg210.nid.onenet.net	(revision 146283)
+++ configs/onenet-dc-xg210.nid.onenet.net	(working copy)
@@ -176,6 +176,7 @@
   alarm-attributes access-port loopback-request nsa na
   alarm-attributes access-port traff-res-limit-exc nsa mn
   alarm-attributes access-port traff-res-limit-exc sa cr
+  alarm-attributes access-port bw-exceeds-port-speed sa na
   alarm-attributes network-port forced nsa na
   alarm-attributes network-port lockout nsa na
   alarm-attributes network-port efm-oam-dying-gasp nsa mn
@@ -239,6 +240,7 @@
   alarm-attributes network-port loopback-request nsa na
   alarm-attributes network-port traff-res-limit-exc nsa mn
   alarm-attributes network-port traff-res-limit-exc sa cr
+  alarm-attributes network-port bw-exceeds-port-speed sa na
   alarm-attributes cfm-mep xcon-ccm sa mn
   alarm-attributes cfm-mep err-ccm sa mn
   alarm-attributes cfm-mep rem-ccm sa mn
@@ -286,8 +288,12 @@
   alarm-attributes lag link-control-protocol-fail sa cr
   alarm-attributes lag link-control-protocol-loopback nsa mn
   alarm-attributes lag link-control-protocol-loopback sa cr
+  alarm-attributes lag amp-no-peer sa mj
+  alarm-attributes lag amp-prov-fail nsa mn
+  alarm-attributes lag amp-config-fail sa cr
   alarm-attributes lag loopback-active nsa na
   alarm-attributes lag loopback-request nsa na
+  alarm-attributes lag service-discarded sa na
   alarm-attributes shelf-xg210 overtemp nsa mn
   alarm-attributes shelf-xg210 undertemp nsa mn
   alarm-attributes shelf-xg210 overvoltage nsa mn
@@ -528,6 +534,8 @@
   config-ssl-strength low
   tacacs-privilege-control enabled
   security-trap-type disabled
+  privilege-mgmt-control disabled
+  privilege-response-timeout 5
   config-rap 1
     ip-address 156.110.31.11
     ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
@@ -618,6 +626,34 @@
   mgmt-traffic-bridge disabled
   mgmt-traffic-bridge-security disabled
 #
+#CLI:PRIORITY MAP PROFILE-2  Create
+#
+home
+configure system
+  profile
+    add prio-map-profile 2 "Profile-2" 802.1p
+    back
+  profile
+    configure prio-map-profile prio_map_profile-2
+      cos-map-control enabled
+      default-cos 0
+      edit-prio-map prio_map_profile_pri_entry-2-1 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-2 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-3 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-4 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-5 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-6 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-7 0 none
+      edit-prio-map prio_map_profile_pri_entry-2-8 0 none
+      edit-cos-map 0 0 0
+      edit-cos-map 1 1 1
+      edit-cos-map 2 2 2
+      edit-cos-map 3 3 3
+      edit-cos-map 4 4 4
+      edit-cos-map 5 5 5
+      edit-cos-map 6 6 6
+      edit-cos-map 7 7 7
+#
 #CLI:SAT SAC PROFILE-1  Edit
 #
 home
@@ -1254,6 +1290,7 @@
         tx-dei-outer-tag-type stag
         tx-dei-action mark-color
         low-latency-queuing disabled
+        priority-mapping-profile prio_map_profile-1
         a2n-swap-priority-vid disabled
         n2a-swap-priority-vid disabled
         swap-priority-vid 1
@@ -1444,6 +1481,7 @@
         mtu 9612
         phy-type lan
         wdmchannel not-tunable
+        priority-mapping-profile prio_map_profile-1
         pcp-mode none
         low-latency-queuing disabled
         rx-dei-outer-tag-type ctag-or-stag
@@ -1666,6 +1704,8 @@
   configure nte ntexg210-1-1-1 
     configure network-port network-1-1-1-2
         media fiber fixed-10g-full
+        port-shaped-speed 0
+        port-shaping disabled
         sync-e-mode disabled
         ql-mode disabled
         expected-ql ql-none
@@ -1702,6 +1742,7 @@
         mtu 9612
         phy-type lan
         wdmchannel not-tunable
+        priority-mapping-profile prio_map_profile-1
         pcp-mode none
         low-latency-queuing disabled
         rx-dei-outer-tag-type ctag-or-stag
@@ -1739,6 +1780,30 @@
           back
         back
     configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-0 0 0
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-1 1 1
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-2 2 2
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-3 3 3
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-4 4 4
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-5 5 5
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-6 6 6
+        back
+    configure network-port network-1-1-1-2
+        edit-prio-map network_prio_map-1-1-1-2-7 7 7
+        back
+    configure network-port network-1-1-1-2
         cpd-filter isl pass-thru
         cpd-filter pagp pass-thru
         cpd-filter udld pass-thru
@@ -1977,9 +2042,15 @@
 home
 configure communication
   configure eth0 ip-mode ipv4-only
-  configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+  configure eth0 dhcp-control disabled 10.199.192.2 255.255.255.252
   configure eth0 rip2Pkts-control disabled
 #
+#CLI:IP SYSTEM  Create
+#
+home
+configure communication
+  configure eth0 sys-def-gateway 10.199.192.1
+#
 #CLI:FLOW-1-1-2-1-1  Edit
 #
 home
@@ -1992,9 +2063,10 @@
           ses-frame-loss-threshold-ratio 30
           policing enabled
           policing-control a2n-n2a
-          access-interface access-1-1-2-1 network-interface network-1-1-1-1 ctag push 500-0 enabled stag none 
+          a2n-prio-mapping-profile prio_map_profile-2
+          n2a-prio-mapping-profile prio_map_profile-1
+          access-interface access-1-1-2-1 network-interface network-1-1-1-1 ctag push 500-0 stag none 
           net-to-acc-rate-limiting disabled
-          default-cos 0
           innertag-prio-ctrl disabled
           access-learning-ctrl none
           access-max-forwarding-entries 16384
@@ -2257,36 +2329,44 @@
         alias ""
         mdix auto
 #
-#CLI:MANAGEMENT TUNNEL-1  Create
+#CLI:PPS-1-1-1-1  Edit
 #
 home
-configure communication
-  add mgmttunnel 1 "LTP" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
-home
-configure communication
-  configure mgmttnl mgmt_tnl-1
-    buffer-size 32
-    cos 7
-    rip2Pkts-control disabled
-    back
-home
-configure communication
-  configure mgmttnl mgmt_tnl-1
-    ip-mode ipv4-only
+network-element ne-1
+  configure nte ntexg210-1-1-1 
+    configure pps-port pps-1-1-1-1
+        alias ""
+        time-of-day-source none
+        admin-state unassigned
+        squelch-ctrl never
+        squelch-ql ql-none
+        delay-compensation 0
+        input-rate pulse-per-sec
 #
-#CLI:MANAGEMENT TUNNEL-1  Edit
+#CLI:TOD-1-1-1-1  Edit
 #
 home
-configure communication
-  configure mgmttnl mgmt_tnl-1
-    dhcpv4-control disabled 10.199.192.2 255.255.255.252
+network-element ne-1
+  configure nte ntexg210-1-1-1 
+    configure tod-port tod-1-1-1-1
+        alias ""
+        time-of-day-source none
+        admin-state unassigned
+        squelch-ctrl never
+        squelch-ql ql-none
 #
-#CLI:MANAGEMENT TUNNEL-1  Create
+#CLI:CLK-1-1-1-1  Edit
 #
 home
-configure communication
-  configure mgmttnl mgmt_tnl-1
-    sys-def-gateway 10.199.192.1
+network-element ne-1
+  configure nte ntexg210-1-1-1 
+    configure 10mhz-port clk-1-1-1-1
+        freq-source none
+        admin-state unassigned
+        alias ""
+        squelch-ctrl never
+        squelch-ql ql-none
+        assumed-ql not-available
 #
 #CLI:LLDP SYS  Edit
 #
@@ -2433,7 +2513,7 @@
 #                Card Type : ntexg210
 #     Physical Entity Name : FSP150CC-XG210
 #              MAC Address : 00:80:ea:68:20:00
-#        Software Revision : 8.1.2-340
+#        Software Revision : 8.5.1-219
 #        Firmware Revision : 
 #        Hardware Revision : 1.05
 #                      USI : LBADVA71152302799



More information about the Nocrancid mailing list