[Nocrancid] autopop-onenet.net/oids-clinton.nid.onenet.net[0] router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Tue Dec 19 15:51:16 CST 2017
Index: router.db
===================================================================
--- router.db (revision 158642)
+++ router.db (working copy)
@@ -471,6 +471,7 @@
mhsso-tishomingo.client.onenet.net:juniper:up
miami-ps-srx220.client.onenet.net:juniper:up
mid-america-tech-ctr.client.onenet.net:juniper:up
+midcon-okc.nid.onenet.net:fsp150:up
midway-ps-ge112.nid.onenet.net:fsp150:up
midway-ps.client.onenet.net:juniper:up
millwood-ps.nid.onenet.net:fsp150:up
@@ -488,7 +489,7 @@
ninnekah-ps.client.onenet.net:juniper:up
nor-adva.p.onenet.net:fsp3000:up
norman-central-pl.nid.onenet.net:fsp150:up
-norman-hs.nid.onenet.net:fsp150:up
+norman-hs.nid.onenet.net:fsp150:down
norman-ps-isc.nid.onenet.net:fsp150:up
nsu-broken-arrow.nid.onenet.net:fsp150:up
nsu-muskogee.nid.onenet.net:fsp150:up
@@ -584,6 +585,7 @@
oeta-guymon-tower.nid.onenet.net:fsp150:up
oeta-ponca-city-tower.nid.onenet.net:fsp150:up
oids-clinton.nid.onenet.net:fsp150:up
+oids-mangum.nid.onenet.net:fsp150:up
oids-okmulgee.client.onenet.net:juniper:up
OJA-COJC-TECUMSEH-SRX240.client.onenet.net:juniper:up
oja-sw-youth-academy-manitou.client.onenet.net:juniper:up
Index: routers.up
===================================================================
--- routers.up (revision 158642)
+++ routers.up (working copy)
@@ -374,6 +374,7 @@
mhsso-tishomingo.client.onenet.net:juniper
miami-ps-srx220.client.onenet.net:juniper
mid-america-tech-ctr.client.onenet.net:juniper
+midcon-okc.nid.onenet.net:fsp150
midway-ps-ge112.nid.onenet.net:fsp150
midway-ps.client.onenet.net:juniper
millwood-ps.nid.onenet.net:fsp150
@@ -388,7 +389,6 @@
ninnekah-ps.client.onenet.net:juniper
nor-adva.p.onenet.net:fsp3000
norman-central-pl.nid.onenet.net:fsp150
-norman-hs.nid.onenet.net:fsp150
norman-ps-isc.nid.onenet.net:fsp150
nsu-broken-arrow.nid.onenet.net:fsp150
nsu-muskogee.nid.onenet.net:fsp150
@@ -482,6 +482,7 @@
oeta-guymon-tower.nid.onenet.net:fsp150
oeta-ponca-city-tower.nid.onenet.net:fsp150
oids-clinton.nid.onenet.net:fsp150
+oids-mangum.nid.onenet.net:fsp150
oids-okmulgee.client.onenet.net:juniper
oja-cojc-tecumseh-srx240.client.onenet.net:juniper
oja-sw-youth-academy-manitou.client.onenet.net:juniper
Index: configs/oids-clinton.nid.onenet.net
===================================================================
--- configs/oids-clinton.nid.onenet.net (revision 143334)
+++ configs/oids-clinton.nid.onenet.net (working copy)
@@ -39,7 +39,7 @@
security-banner "WARNING: UNAUTHORIZED USE IS STRICTLY PROHIBITED\\n\\nTo protect the system from unauthorized use,\\nactivities on this system are monitored,recorded and subject to audit.\\nUse of this system is expressed consent to such monitoring and recording.\\nAny unauthorized access or use of this system is prohibited and\\nis subject to criminal and civil penalties and/or administrative action."
security-prompt disabled
ssh enabled
- snmp-engine-id "800009f0030080ea6dcce0"
+ snmp-engine-id "800009f0030080ea7a3b60"
utc-leap-offset disabled
long-if-alias disabled
time-zone
@@ -53,6 +53,14 @@
dst-start-time "02:00"
dst-end-time "02:00"
back
+ simple-ltp
+ simple-ltp-control disabled
+ file-trans-protocol scp
+ server-ipv4-addr 0.0.0.0
+ username ""
+ configfile-name ""
+ software-file-name ""
+ back
ftp disabled
ntp-client
primary-server ipv4 164.58.3.98
@@ -121,11 +129,20 @@
alarm-attributes access-port sfp-tx-flt sa cr
alarm-attributes access-port rmt-efm-lpbk-fail nsa na
alarm-attributes access-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes access-port syncref nsa mn
+ alarm-attributes access-port esmc-fail nsa mn
+ alarm-attributes access-port ql-mismatch nsa mn
+ alarm-attributes access-port freq-offset nsa mn
+ alarm-attributes access-port sync-ql-invalid nsa mn
alarm-attributes access-port bw-exceeds-neg-speed nsa mn
alarm-attributes access-port bw-exceeds-neg-speed sa mj
- alarm-attributes access-port sfp-non-qualified nsa nr
+ alarm-attributes access-port sfp-non-qualified nsa mn
alarm-attributes access-port lnkdn-master-slave-cfg nsa mn
alarm-attributes access-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes access-port syncref-locked-out nsa mn
+ alarm-attributes access-port syncref-forced-switch nsa mn
+ alarm-attributes access-port syncref-manual-switch nsa mn
+ alarm-attributes access-port syncref-wtr nsa mn
alarm-attributes access-port link-control-protocol-fail nsa mn
alarm-attributes access-port link-control-protocol-fail sa cr
alarm-attributes access-port link-control-protocol-loopback nsa mn
@@ -138,6 +155,7 @@
alarm-attributes access-port amp-config-fail sa cr
alarm-attributes access-port lpbk-active nsa na
alarm-attributes access-port lpbk-requested nsa na
+ alarm-attributes access-port bw-exceeds-port-speed sa na
alarm-attributes network-port forced nsa na
alarm-attributes network-port lockout nsa na
alarm-attributes network-port farend-duplex-unknown nsa mn
@@ -176,11 +194,20 @@
alarm-attributes network-port sfp-tx-flt sa cr
alarm-attributes network-port rmt-efm-lpbk-fail nsa na
alarm-attributes network-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes network-port syncref nsa mn
+ alarm-attributes network-port esmc-fail nsa mn
+ alarm-attributes network-port ql-mismatch nsa mn
+ alarm-attributes network-port freq-offset nsa mn
+ alarm-attributes network-port sync-ql-invalid nsa mn
alarm-attributes network-port bw-exceeds-neg-speed nsa mn
alarm-attributes network-port bw-exceeds-neg-speed sa mj
- alarm-attributes network-port sfp-non-qualified nsa nr
+ alarm-attributes network-port sfp-non-qualified nsa mn
alarm-attributes network-port lnkdn-master-slave-cfg nsa mn
alarm-attributes network-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes network-port syncref-locked-out nsa mn
+ alarm-attributes network-port syncref-forced-switch nsa mn
+ alarm-attributes network-port syncref-manual-switch nsa mn
+ alarm-attributes network-port syncref-wtr nsa mn
alarm-attributes network-port link-control-protocol-fail nsa mn
alarm-attributes network-port link-control-protocol-fail sa cr
alarm-attributes network-port link-control-protocol-loopback nsa mn
@@ -193,6 +220,7 @@
alarm-attributes network-port amp-config-fail sa cr
alarm-attributes network-port lpbk-active nsa na
alarm-attributes network-port lpbk-requested nsa na
+ alarm-attributes network-port bw-exceeds-port-speed sa na
alarm-attributes cfm-mep xcon-ccm sa mn
alarm-attributes cfm-mep err-ccm sa mn
alarm-attributes cfm-mep rem-ccm sa mn
@@ -210,13 +238,6 @@
alarm-attributes lag amp-config-fail sa cr
alarm-attributes lag lpbk-active nsa na
alarm-attributes lag lpbk-requested nsa na
- alarm-attributes shelf-nte114 overtemp nsa mn
- alarm-attributes shelf-nte114 undertemp nsa mn
- alarm-attributes nte114 ctneqpt nsa mn
- alarm-attributes nte114 eqpt-flt sa cr
- alarm-attributes nte114 mismatch sa cr
- alarm-attributes nte114 eqpt-rmvd sa cr
- alarm-attributes nte114 test-alarm nsa mj
alarm-attributes mobile-modem lnkdn nsa na
alarm-attributes mobile-modem usbdevicemea nsa na
alarm-attributes mobile-modem usbdevicenonqualified nsa na
@@ -235,9 +256,27 @@
alarm-attributes erp-group erp-blockport1-fs nsa na
alarm-attributes erp-group erp-blockport1-wtr nsa na
alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+ alarm-attributes traffic-ip-intf ip-address-conflict nsa mj
+ alarm-attributes traffic-ip-intf traffic-ip-intf-outage sa mj
+ alarm-attributes vrf ip-address-conflict nsa mj
+ alarm-attributes vrf no-route-resources sa mj
+ alarm-attributes shelf-nte112pro overtemp nsa mn
+ alarm-attributes shelf-nte112pro undertemp nsa mn
+ alarm-attributes nte112pro ctneqpt nsa mn
+ alarm-attributes nte112pro eqpt-flt sa cr
+ alarm-attributes nte112pro mismatch sa cr
+ alarm-attributes nte112pro eqpt-rmvd sa cr
+ alarm-attributes nte112pro test-alarm nsa mj
+ alarm-attributes of-logical-switch of-no-connection sa mj
+ alarm-attributes dhcp-relay-agent ip-address-conflict sa mj
+ alarm-attributes bfd-session bfd-session-down sa mn
+ alarm-attributes eompls-pw destination-unresolved sa mj
alarm-attributes wifi-dongle usbdevicemea nsa na
alarm-attributes wifi-dongle usbdevicenonqualified nsa na
alarm-attributes wifi-dongle usbdeviceremoved nsa na
+ alarm-attributes vxlan-segment vxlan-dmac2dip-table-full sa mj
+ alarm-attributes vtep no-active-route sa mj
+ alarm-attributes gre-tunnel gre-remote-unreachable sa mj
syslog-server 1
configure ip-version ipv4
configure ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000 514
@@ -365,15 +404,16 @@
#
home
configure user-security
- access-order local
- auth-protocol radius
auth-type pap
+ auth-protocol radius
+ access-order local
nas-ip-address 10.199.192.106
nas-ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
security-strength high
accounting disabled
config-ssl-strength low
tacacs-privilege-control enabled
+ tacacs-user-privilege retrieve
security-trap-type disabled
config-rap 1
ip-version ipv4
@@ -464,6 +504,50 @@
ftd 300
fdv 300
#
+#CLI:SAT SAC PROFILE-5 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-5
+ name "SAT_SAC_Profile_5"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-6 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-6
+ name "SAT_SAC_Profile_6"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-7 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-7
+ name "SAT_SAC_Profile_7"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-8 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-8
+ name "SAT_SAC_Profile_8"
+ flr 5.000000
+ ftd 300
+ fdv 300
+#
#CLI:SNMP COMMUNITY ENTRY Create
#
home
@@ -481,17 +565,17 @@
home
network-element ne-1
prompt "NE-1"
- name "OIDS-CLINTON-GE114"
+ name "OIDS-CLINTON-GE112Pro"
contact ""
location ""
pm-interval 15min
admin-state in-service
#
-#CLI:NTE114-1-1-1 Edit
+#CLI:NTE112PRO-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
admin-state in-service
alias ""
snmp-dying-gasp disabled
@@ -500,21 +584,40 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure dcn
- admin-state unassigned
+ admin-state in-service
speed auto
alias ""
mdix auto
#
+#CLI:FLOW-1-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
+ configure flow flow-1-1-1-3-1
+ eompls-pw none prio_map_profile-1 none
+#
+#CLI:FLOW-1-1-1-4-1 Edit
+#
+home
+network-element ne-1
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
+ configure flow flow-1-1-1-4-1
+ eompls-pw none prio_map_profile-1 none
+#
#CLI:ACCESS PORT-1-1-1-3 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
- admin-state unassigned
- service-type epl
+ monitor-enabled disabled
+ admin-state in-service
+ service-type evpl
speed auto
port-shaped-speed 0
port-shaping disabled
@@ -553,110 +656,26 @@
jdsu-lpbk-control disabled
swap-sada none
back
- alias ""
+ alias "OIDS-CLINTON-L2CIRCUIT-CIR0005441"
auto-diagnostic enabled
mtu 9600
afp all-afp
- rx-pause disabled
- tx-pause disabled
qinq-ethertype 0x0
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- multicast-rate-limit-ctrl disabled
- broadcast-rate-limit-ctrl disabled
- combined-rate-limit-ctrl disabled
-#
-#CLI:ACCESS CPDV2-1-1-1-3-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 pass-thru
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b pass-thru
- cpd-filter 01-80-c2-00-00-0c pass-thru
- cpd-filter 01-80-c2-00-00-0d pass-thru
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f pass-thru
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
- clb 1
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- clb 2
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- clb 3
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- clb 4
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- clb 5
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
+ port-vlan-id 3-0
+ n2a-vlan-trunking enabled
+ a2n-push-port-vid enabled
+ n2a-pop-port-vid disabled
+ priority-mapping-profile prio_map_profile-1
+ a2n-swap-priority-vid disabled
+ n2a-swap-priority-vid disabled
+ swap-priority-vid 1
+ independent-port-shaper-bw disabled
+ buffersize 128
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -697,8 +716,9 @@
set-threshold ibrmintx 0 15min
set-threshold ibrrx 0 15min
set-threshold ibrtx 0 15min
- set-threshold fmcd 0 15min
- set-threshold fbcd 0 15min
+ set-threshold acl-not-match 0 15min
+ set-threshold acl-foward-to-cpu 0 15min
+ set-threshold dhcp-drop-no-interface 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -738,77 +758,16 @@
set-threshold ibrmintx 0 1day
set-threshold ibrrx 0 1day
set-threshold ibrtx 0 1day
- set-threshold fmcd 0 1day
- set-threshold fbcd 0 1day
+ set-threshold acl-not-match 0 1day
+ set-threshold acl-foward-to-cpu 0 1day
+ set-threshold dhcp-drop-no-interface 0 1day
#
-#CLI:ACCESS PORT-1-1-1-4 Edit
+#CLI:ACCESS CPDV2-1-1-1-3-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- admin-state in-service
- service-type epl
- speed auto
- port-shaped-speed 0
- port-shaping disabled
- mdix auto
- lpbk
- inner-vlan1-control disabled
- outer-vlan1-control disabled
- inner-vlan2-control disabled
- outer-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan3-control disabled
- back
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 4
- remote-link-ids none
- back
- lpbk
- block enabled
- dst-mac-control disabled
- src-mac-control disabled
- outer-vlan1 777-*
- inner-vlan1 4094-0
- outer-vlan2 4094-1
- inner-vlan2 4094-1
- outer-vlan3 4094-2
- inner-vlan3 4094-2
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada sada
- back
- alias ""
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- rx-pause disabled
- tx-pause disabled
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
- multicast-rate-limit-ctrl disabled
- broadcast-rate-limit-ctrl disabled
- combined-rate-limit-ctrl disabled
-#
-#CLI:ACCESS CPDV2-1-1-1-4-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
@@ -820,167 +779,93 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
cpd-filter efm-oam discard
cpd-filter ssm discard
- cpd-filter port-authen pass-thru
+ cpd-filter port-authen use-mac-setting
cpd-filter lan-bridges pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
+ cpd-filter elmi use-mac-setting
cpd-filter 01-80-c2-00-00-00 pass-thru
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
cpd-filter 01-80-c2-00-00-0b pass-thru
cpd-filter 01-80-c2-00-00-0c pass-thru
cpd-filter 01-80-c2-00-00-0d pass-thru
- cpd-filter 01-80-c2-00-00-0e discard
+ cpd-filter 01-80-c2-00-00-0e pass-thru
cpd-filter 01-80-c2-00-00-0f pass-thru
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
clb 1
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-3-2 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
clb 2
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-3-3 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
clb 3
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-3-4 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
clb 4
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-3-5 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
clb 5
length 0.10
description ""
control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- pm
- set-threshold abrrx 0 15min
- set-threshold abrtx 0 15min
- set-threshold aufd 0 15min
- set-threshold apfd 0 15min
- set-threshold esbf 0 15min
- set-threshold esbp 0 15min
- set-threshold esbs 0 15min
- set-threshold esc 0 15min
- set-threshold escae 37055 15min
- set-threshold esde 37055 15min
- set-threshold esf 37055 15min
- set-threshold esfs 0 15min
- set-threshold esj 0 15min
- set-threshold esmf 0 15min
- set-threshold esmp 0 15min
- set-threshold eso 0 15min
- set-threshold esof 0 15min
- set-threshold esop 37055 15min
- set-threshold esp 0 15min
- set-threshold esp64 0 15min
- set-threshold esp65 0 15min
- set-threshold esp128 0 15min
- set-threshold esp256 0 15min
- set-threshold esp512 0 15min
- set-threshold esp1024 0 15min
- set-threshold esp1519 0 15min
- set-threshold esuf 0 15min
- set-threshold esup 37055 15min
- set-threshold l2cpfd 0 15min
- set-threshold l2cpfp 0 15min
- set-threshold l2ptfe 0 15min
- set-threshold l2ptfd 0 15min
- set-threshold uas 10 15min
- set-threshold ibrmaxrx 0 15min
- set-threshold ibrmaxtx 0 15min
- set-threshold ibrminrx 0 15min
- set-threshold ibrmintx 0 15min
- set-threshold ibrrx 0 15min
- set-threshold ibrtx 0 15min
- set-threshold fmcd 0 15min
- set-threshold fbcd 0 15min
- set-threshold abrrx 0 1day
- set-threshold abrtx 0 1day
- set-threshold aufd 0 1day
- set-threshold apfd 0 1day
- set-threshold esbf 0 1day
- set-threshold esbp 0 1day
- set-threshold esbs 0 1day
- set-threshold esc 0 1day
- set-threshold escae 3557280 1day
- set-threshold esde 3557280 1day
- set-threshold esf 3557280 1day
- set-threshold esfs 0 1day
- set-threshold esj 0 1day
- set-threshold esmf 0 1day
- set-threshold esmp 0 1day
- set-threshold eso 0 1day
- set-threshold esof 0 1day
- set-threshold esop 3557280 1day
- set-threshold esp 0 1day
- set-threshold esp64 0 1day
- set-threshold esp65 0 1day
- set-threshold esp128 0 1day
- set-threshold esp256 0 1day
- set-threshold esp512 0 1day
- set-threshold esp1024 0 1day
- set-threshold esp1519 0 1day
- set-threshold esuf 0 1day
- set-threshold esup 3557280 1day
- set-threshold l2cpfd 0 1day
- set-threshold l2cpfp 0 1day
- set-threshold l2ptfe 0 1day
- set-threshold l2ptfd 0 1day
- set-threshold uas 10 1day
- set-threshold ibrmaxrx 0 1day
- set-threshold ibrmaxtx 0 1day
- set-threshold ibrminrx 0 1day
- set-threshold ibrmintx 0 1day
- set-threshold ibrrx 0 1day
- set-threshold ibrtx 0 1day
- set-threshold fmcd 0 1day
- set-threshold fbcd 0 1day
#
-#CLI:ACCESS PORT-1-1-1-5 Edit
+#CLI:ACCESS PORT-1-1-1-4 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
+ monitor-enabled disabled
admin-state in-service
service-type evpl
speed auto
@@ -1004,7 +889,7 @@
llf-trigger-event none
llf-tx-action-type no-action
llf-delay 0
- local-link-id 5
+ local-link-id 4
remote-link-ids none
back
lpbk
@@ -1021,20 +906,17 @@
jdsu-lpbk-control disabled
swap-sada none
back
- alias "OIDS-CLINTON-L2CIRCUIT-CIR0005441"
+ alias "OIDS-CLINTON-10M-CIR0005441"
auto-diagnostic enabled
mtu 9600
afp all-afp
- qinq-ethertype 0x8100
+ qinq-ethertype 0x0
pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
- multicast-rate-limit-ctrl disabled
- broadcast-rate-limit-ctrl disabled
- combined-rate-limit-ctrl disabled
- port-vlan-id 5-0
+ port-vlan-id 4-0
n2a-vlan-trunking enabled
a2n-push-port-vid enabled
n2a-pop-port-vid disabled
@@ -1042,95 +924,8 @@
a2n-swap-priority-vid disabled
n2a-swap-priority-vid disabled
swap-priority-vid 1
-#
-#CLI:ACCESS CPDV2-1-1-1-5-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
- clb 1
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- clb 2
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- clb 3
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- clb 4
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- clb 5
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
+ independent-port-shaper-bw disabled
+ buffersize 128
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -1171,8 +966,9 @@
set-threshold ibrmintx 0 15min
set-threshold ibrrx 0 15min
set-threshold ibrtx 0 15min
- set-threshold fmcd 0 15min
- set-threshold fbcd 0 15min
+ set-threshold acl-not-match 0 15min
+ set-threshold acl-foward-to-cpu 0 15min
+ set-threshold dhcp-drop-no-interface 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold aufd 0 1day
@@ -1212,83 +1008,16 @@
set-threshold ibrmintx 0 1day
set-threshold ibrrx 0 1day
set-threshold ibrtx 0 1day
- set-threshold fmcd 0 1day
- set-threshold fbcd 0 1day
+ set-threshold acl-not-match 0 1day
+ set-threshold acl-foward-to-cpu 0 1day
+ set-threshold dhcp-drop-no-interface 0 1day
#
-#CLI:ACCESS PORT-1-1-1-6 Edit
+#CLI:ACCESS CPDV2-1-1-1-4-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- admin-state in-service
- service-type evpl
- speed 100-full
- port-shaped-speed 0
- port-shaping disabled
- mdix crossed
- lpbk
- inner-vlan1-control disabled
- outer-vlan1-control disabled
- inner-vlan2-control disabled
- outer-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan3-control disabled
- back
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 6
- remote-link-ids none
- back
- lpbk
- block enabled
- dst-mac-control disabled
- src-mac-control disabled
- outer-vlan1 4094-0
- inner-vlan1 4094-0
- outer-vlan2 4094-1
- inner-vlan2 4094-1
- outer-vlan3 4094-2
- inner-vlan3 4094-2
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada none
- back
- alias "OIDS-CLINTON-10M-CIR0005441"
- auto-diagnostic enabled
- mtu 9600
- afp all-afp
- qinq-ethertype 0x0
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
- multicast-rate-limit-ctrl disabled
- broadcast-rate-limit-ctrl disabled
- combined-rate-limit-ctrl disabled
- port-vlan-id 6-0
- n2a-vlan-trunking enabled
- a2n-push-port-vid enabled
- n2a-pop-port-vid disabled
- priority-mapping-profile prio_map_profile-1
- a2n-swap-priority-vid disabled
- n2a-swap-priority-vid disabled
- swap-priority-vid 1
-#
-#CLI:ACCESS CPDV2-1-1-1-6-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
@@ -1300,82 +1029,151 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
cpd-filter efm-oam discard
cpd-filter ssm discard
- cpd-filter port-authen pass-thru
+ cpd-filter port-authen use-mac-setting
cpd-filter lan-bridges pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
+ cpd-filter elmi use-mac-setting
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
clb 1
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-4-2 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
clb 2
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-4-3 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
clb 3
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-4-4 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
clb 4
length 0.10
description ""
control disabled
+#
+#CLI:ACCESS CLB-1-1-1-4-5 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
clb 5
length 0.10
description ""
control disabled
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-1
+ admin-state in-service
+ media copper 100-full
+ port-shaped-speed 0
+ port-shaping disabled
+ mdix crossed
+ lpbk
+ inner-vlan1-control disabled
+ outer-vlan1-control disabled
+ inner-vlan2-control disabled
+ outer-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan3-control disabled
+ back
+ efm-oam
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ alias ""
+ auto-diagnostic enabled
+ mtu 9638
+ qinq-ethertype 0x8100
+ priority-mapping-profile prio_map_profile-1
+ rx-dei-action use
+ rx-dei-tag-type ctag-or-stag
+ tx-dei-action mark-color
+ tx-dei-tag-type stag
+ independent-port-shaper-bw disabled
+ pcp-mode none
+ encap-pcp-mode none
+ ip-prec-mode none
+ exp-mode none
+ eompls-src-ip-address 0.0.0.0
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ outer-vlan1 4094-0
+ inner-vlan1 4094-0
+ outer-vlan2 4094-1
+ inner-vlan2 4094-1
+ outer-vlan3 4094-2
+ inner-vlan3 4094-2
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada none
+ back
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+home
+ delay-asymmetry 0
+ back
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
- set-threshold aufd 0 15min
- set-threshold apfd 0 15min
set-threshold esbf 0 15min
set-threshold esbp 0 15min
set-threshold esbs 0 15min
@@ -1402,8 +1200,7 @@
set-threshold esup 37055 15min
set-threshold l2cpfd 0 15min
set-threshold l2cpfp 0 15min
- set-threshold l2ptfe 0 15min
- set-threshold l2ptfd 0 15min
+ set-threshold psc 0 15min
set-threshold uas 10 15min
set-threshold ibrmaxrx 0 15min
set-threshold ibrmaxtx 0 15min
@@ -1411,12 +1208,11 @@
set-threshold ibrmintx 0 15min
set-threshold ibrrx 0 15min
set-threshold ibrtx 0 15min
- set-threshold fmcd 0 15min
- set-threshold fbcd 0 15min
+ set-threshold acl-not-match 0 15min
+ set-threshold acl-foward-to-cpu 0 15min
+ set-threshold dhcp-drop-no-interface 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
- set-threshold aufd 0 1day
- set-threshold apfd 0 1day
set-threshold esbf 0 1day
set-threshold esbp 0 1day
set-threshold esbs 0 1day
@@ -1443,8 +1239,7 @@
set-threshold esup 3557280 1day
set-threshold l2cpfd 0 1day
set-threshold l2cpfp 0 1day
- set-threshold l2ptfe 0 1day
- set-threshold l2ptfd 0 1day
+ set-threshold psc 0 1day
set-threshold uas 10 1day
set-threshold ibrmaxrx 0 1day
set-threshold ibrmaxtx 0 1day
@@ -1452,69 +1247,15 @@
set-threshold ibrmintx 0 1day
set-threshold ibrrx 0 1day
set-threshold ibrtx 0 1day
- set-threshold fmcd 0 1day
- set-threshold fbcd 0 1day
+ set-threshold acl-not-match 0 1day
+ set-threshold acl-foward-to-cpu 0 1day
+ set-threshold dhcp-drop-no-interface 0 1day
#
-#CLI:NETWORK PORT-1-1-1-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-1
- admin-state in-service
- media copper 100-full
- port-shaped-speed 0
- port-shaping disabled
- mdix crossed
- lpbk
- inner-vlan1-control disabled
- outer-vlan1-control disabled
- inner-vlan2-control disabled
- outer-vlan2-control disabled
- inner-vlan3-control disabled
- outer-vlan3-control disabled
- back
- efm-oam
- oam-control disabled
- oam-local-mode oam-active
- back
- alias ""
- auto-diagnostic enabled
- mtu 9612
- qinq-ethertype 0x8100
- priority-mapping-profile prio_map_profile-1
- pcp-mode none
- rx-dei-action use
- rx-dei-tag-type ctag-or-stag
- tx-dei-action mark-color
- tx-dei-tag-type stag
- lpbk
- block enabled
- dst-mac-control disabled
- src-mac-control disabled
- outer-vlan1 4094-0
- inner-vlan1 4094-0
- outer-vlan2 4094-1
- inner-vlan2 4094-1
- outer-vlan3 4094-2
- inner-vlan3 4094-2
- lpbk-timer 10
- jdsu-lpbk-control disabled
- swap-sada none
- back
- llf
- llf-control disabled
- llf-trigger-event none
- llf-tx-action-type no-action
- llf-delay 0
- local-link-id 1
- remote-link-ids none
-#
#CLI:NETWORK CPDV2-1-1-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
@@ -1526,160 +1267,91 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
cpd-filter efm-oam discard
cpd-filter ssm discard
- cpd-filter port-authen pass-thru
+ cpd-filter port-authen use-mac-setting
cpd-filter lan-bridges pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
+ cpd-filter elmi use-mac-setting
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
clb 1
length 0.10
description ""
control disabled
+#
+#CLI:NETWORK CLB-1-1-1-1-2 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
clb 2
length 0.10
description ""
control disabled
+#
+#CLI:NETWORK CLB-1-1-1-1-3 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
clb 3
length 0.10
description ""
control disabled
+#
+#CLI:NETWORK CLB-1-1-1-1-4 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
clb 4
length 0.10
description ""
control disabled
+#
+#CLI:NETWORK CLB-1-1-1-1-5 Edit
+#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
clb 5
length 0.10
description ""
control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-1
- pm
- set-threshold abrrx 0 15min
- set-threshold abrtx 0 15min
- set-threshold esbf 0 15min
- set-threshold esbp 0 15min
- set-threshold esbs 0 15min
- set-threshold esc 0 15min
- set-threshold escae 37055 15min
- set-threshold esde 37055 15min
- set-threshold esf 37055 15min
- set-threshold esfs 0 15min
- set-threshold esj 0 15min
- set-threshold esmf 0 15min
- set-threshold esmp 0 15min
- set-threshold eso 0 15min
- set-threshold esof 0 15min
- set-threshold esop 37055 15min
- set-threshold esp 0 15min
- set-threshold esp64 0 15min
- set-threshold esp65 0 15min
- set-threshold esp128 0 15min
- set-threshold esp256 0 15min
- set-threshold esp512 0 15min
- set-threshold esp1024 0 15min
- set-threshold esp1519 0 15min
- set-threshold esuf 0 15min
- set-threshold esup 37055 15min
- set-threshold l2cpfd 0 15min
- set-threshold l2cpfp 0 15min
- set-threshold psc 0 15min
- set-threshold uas 10 15min
- set-threshold pbbunibdadiscard 0 15min
- set-threshold pbbgrpbdadiscard 0 15min
- set-threshold ibrmaxrx 0 15min
- set-threshold ibrmaxtx 0 15min
- set-threshold ibrminrx 0 15min
- set-threshold ibrmintx 0 15min
- set-threshold ibrrx 0 15min
- set-threshold ibrtx 0 15min
- set-threshold abrrx 0 1day
- set-threshold abrtx 0 1day
- set-threshold esbf 0 1day
- set-threshold esbp 0 1day
- set-threshold esbs 0 1day
- set-threshold esc 0 1day
- set-threshold escae 3557280 1day
- set-threshold esde 3557280 1day
- set-threshold esf 3557280 1day
- set-threshold esfs 0 1day
- set-threshold esj 0 1day
- set-threshold esmf 0 1day
- set-threshold esmp 0 1day
- set-threshold eso 0 1day
- set-threshold esof 0 1day
- set-threshold esop 3557280 1day
- set-threshold esp 0 1day
- set-threshold esp64 0 1day
- set-threshold esp65 0 1day
- set-threshold esp128 0 1day
- set-threshold esp256 0 1day
- set-threshold esp512 0 1day
- set-threshold esp1024 0 1day
- set-threshold esp1519 0 1day
- set-threshold esuf 0 1day
- set-threshold esup 3557280 1day
- set-threshold l2cpfd 0 1day
- set-threshold l2cpfp 0 1day
- set-threshold psc 0 1day
- set-threshold uas 10 1day
- set-threshold pbbunibdadiscard 0 1day
- set-threshold pbbgrpbdadiscard 0 1day
- set-threshold ibrmaxrx 0 1day
- set-threshold ibrmaxtx 0 1day
- set-threshold ibrminrx 0 1day
- set-threshold ibrmintx 0 1day
- set-threshold ibrrx 0 1day
- set-threshold ibrtx 0 1day
#
#CLI:NETWORK PORT-1-1-1-2 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-2
admin-state unassigned
media copper auto
@@ -1700,14 +1372,19 @@
back
alias ""
auto-diagnostic enabled
- mtu 9612
+ mtu 9638
qinq-ethertype 0x0
priority-mapping-profile prio_map_profile-1
- pcp-mode none
rx-dei-action use
rx-dei-tag-type ctag-or-stag
tx-dei-action mark-color
tx-dei-tag-type stag
+ independent-port-shaper-bw disabled
+ pcp-mode none
+ encap-pcp-mode none
+ ip-prec-mode none
+ exp-mode none
+ eompls-src-ip-address 0.0.0.0
lpbk
block enabled
dst-mac-control disabled
@@ -1729,94 +1406,9 @@
llf-delay 0
local-link-id 2
remote-link-ids none
-#
-#CLI:NETWORK CPDV2-1-1-1-2-1 Edit
-#
home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam discard
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
- clb 1
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- clb 2
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- clb 3
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- clb 4
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- clb 5
- length 0.10
- description ""
- control disabled
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
+ delay-asymmetry 0
+ back
pm
set-threshold abrrx 0 15min
set-threshold abrtx 0 15min
@@ -1848,14 +1440,15 @@
set-threshold l2cpfp 0 15min
set-threshold psc 0 15min
set-threshold uas 10 15min
- set-threshold pbbunibdadiscard 0 15min
- set-threshold pbbgrpbdadiscard 0 15min
set-threshold ibrmaxrx 0 15min
set-threshold ibrmaxtx 0 15min
set-threshold ibrminrx 0 15min
set-threshold ibrmintx 0 15min
set-threshold ibrrx 0 15min
set-threshold ibrtx 0 15min
+ set-threshold acl-not-match 0 15min
+ set-threshold acl-foward-to-cpu 0 15min
+ set-threshold dhcp-drop-no-interface 0 15min
set-threshold abrrx 0 1day
set-threshold abrtx 0 1day
set-threshold esbf 0 1day
@@ -1886,47 +1479,118 @@
set-threshold l2cpfp 0 1day
set-threshold psc 0 1day
set-threshold uas 10 1day
- set-threshold pbbunibdadiscard 0 1day
- set-threshold pbbgrpbdadiscard 0 1day
set-threshold ibrmaxrx 0 1day
set-threshold ibrmaxtx 0 1day
set-threshold ibrminrx 0 1day
set-threshold ibrmintx 0 1day
set-threshold ibrrx 0 1day
set-threshold ibrtx 0 1day
+ set-threshold acl-not-match 0 1day
+ set-threshold acl-foward-to-cpu 0 1day
+ set-threshold dhcp-drop-no-interface 0 1day
#
-#CLI:ELMI ACCESS-1-1-1-3 Edit
+#CLI:NETWORK CPDV2-1-1-1-2-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- elmi
- elmi-control disabled
- n393 4
- t392 15
- async-status enabled
- min-async-status-interval 1
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ clb 1
+ length 0.10
+ description ""
+ control disabled
#
-#CLI:ELMI ACCESS-1-1-1-4 Edit
+#CLI:NETWORK CLB-1-1-1-2-2 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- elmi
- elmi-control disabled
- n393 4
- t392 15
- async-status enabled
- min-async-status-interval 1
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ clb 2
+ length 0.10
+ description ""
+ control disabled
#
-#CLI:ELMI ACCESS-1-1-1-5 Edit
+#CLI:NETWORK CLB-1-1-1-2-3 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+#
+#CLI:NETWORK CLB-1-1-1-2-4 Edit
+#
+home
+network-element ne-1
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+#
+#CLI:NETWORK CLB-1-1-1-2-5 Edit
+#
+home
+network-element ne-1
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+#
+#CLI:ELMI ACCESS-1-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
elmi
elmi-control disabled
n393 4
@@ -1934,12 +1598,12 @@
async-status enabled
min-async-status-interval 1
#
-#CLI:ELMI ACCESS-1-1-1-6 Edit
+#CLI:ELMI ACCESS-1-1-1-4 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
elmi
elmi-control disabled
n393 4
@@ -1951,7 +1615,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
elmi
elmi-control disabled
@@ -1964,7 +1628,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-2
elmi
elmi-control disabled
@@ -2295,7 +1959,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
ecpa-ctrl
src-port access-1-1-1-3
inject-direction a2n
@@ -2311,7 +1975,7 @@
#
home
configure communication
- add mgmttunnel 1 "LTP" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 enabled 828 256000 768000
+ add mgmttunnel 1 "MGMT" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 enabled 828 256000 768000
configure mgmttnl mgmt_tnl-1
dhcp-control disabled 10.199.192.106 255.255.255.252
back
@@ -2321,13 +1985,15 @@
back
configure mgmttnl mgmt_tnl-1
rip2Pkts-control disabled
- dhcp-client-id-control disabled
+ dhcp-client-id-control enabled
dhcp-class-id-control enabled
dhcp-host-name-control enabled
dhcp-log-server-control disabled
dhcp-ntp-server-control disabled
dhcp-client-id-type mac-addr
dhcp-host-name-type system-name
+ dhcp-vendor-info-control disabled
+ dhcp-vendor-info-type system-name
#
#CLI:IP SYSTEM Edit
#
@@ -2340,6 +2006,8 @@
configure eth0 dhcp-class-id-control enabled
configure eth0 dhcp-host-name-control enabled
configure eth0 dhcp-host-name-type system-name
+ configure eth0 dhcp-vendor-info-control disabled
+ configure eth0 dhcp-vendor-info-type system-name
configure eth0 dhcp-log-server-control disabled
configure eth0 dhcp-ntp-server-control disabled
configure eth0 rip2Pkts-control disabled
@@ -2350,25 +2018,20 @@
configure communication
configure src-addr out-ip-intf-addr "eth0"
#
-#CLI:FLOW-1-1-1-3-1 Edit
+#CLI:FLOW-1-1-1-3-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
+ add flow flow-1-1-1-3-1 "" regular-evc disabled disabled disabled disabled 0 disabled none push 828-0 "10-*,210-*" 0 10048000 access-interface access-1-1-1-3 network-interface network-1-1-1-1 flow-based n2a-prio-mapping-profile none a2n-prio-mapping-profile prio_map_profile-1
configure flow flow-1-1-1-3-1
- itag none
- circuit-name ""
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- access-interface access-1-1-1-3 network-interface network-1-1-1-1 push 3-0 none
- a2n-shaping-type flow-based
+ admin-state in-service
policing enabled
policing-control a2n-n2a
- net-to-acc-rate-limiting disabled
- default-cos 0
- priority-mapping-profile none
- pbb-frames disabled
+ ses-frame-loss-threshold-ratio 30
+ independent-a2n-shaper-bw disabled
+ n2a-outertag-prio-ctrl disabled
access-learning-ctrl none
network-learning-ctrl none
access-max-forwarding-entries 2048
@@ -2378,6 +2041,9 @@
aging-timer 300
table-full-action forward
n2n-forwarding disabled
+ a2n-multicast-rate-limit-ctrl disabled
+ a2n-broadcast-rate-limit-ctrl disabled
+ a2n-combined-rate-limit-ctrl disabled
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -2388,37 +2054,37 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam use-mac-setting
cpd-filter ssm discard
- cpd-filter port-authen pass-thru
+ cpd-filter port-authen use-mac-setting
cpd-filter lan-bridges pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
+ cpd-filter elmi use-mac-setting
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -2454,6 +2120,10 @@
set-threshold ibrrln2amin 0 15min
set-threshold ibrn2a 0 15min
set-threshold ibrrln2a 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold acl-a2n-drop 0 15min
+ set-threshold acl-n2a-drop 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -2488,12 +2158,16 @@
set-threshold ibrrln2amin 0 1day
set-threshold ibrn2a 0 1day
set-threshold ibrrln2a 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+ set-threshold acl-a2n-drop 0 1day
+ set-threshold acl-n2a-drop 0 1day
#
#CLI:A2N SHAPER-1-1-1-3-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
configure a2n-shaper a2n_shaper-1-1-1-3-1-0
@@ -2502,6 +2176,13 @@
configure a2n-shaper a2n_shaper-1-1-1-3-1-0
soam-cir 0
soam-eir 0
+ max-drop-probability-green 100
+ max-threshold-green 100
+ min-threshold-green 100
+ max-drop-probability-yellow 100
+ max-threshold-yellow 75
+ min-threshold-yellow 75
+ avg-frame-size-before-frag 2024
back
configure a2n-shaper a2n_shaper-1-1-1-3-1-0
pm
@@ -2524,17 +2205,18 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
configure a2n-policer a2n_policer-1-1-1-3-1-0
- eir 0
- ebs 0
- cir 0
- cbs 0
+ ebs 1024
+ eir 10048000
color-marking enabled
color-mode color-aware
coupling-flag enabled
+ cir 0
+ cbs 0
+ envelope none
back
configure a2n-policer a2n_policer-1-1-1-3-1-0
pm
@@ -2555,10 +2237,13 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
configure flow flow-1-1-1-3-1
configure n2a-policer n2a_policer-1-1-1-3-1-0
+ envelope none
+ back
+ configure n2a-policer n2a_policer-1-1-1-3-1-0
pm
set-threshold fmg 0 15min
set-threshold fmy 0 15min
@@ -2573,52 +2258,20 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
+#CLI:FLOW-1-1-1-4-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-3
- configure n2a-shaper port_n2a_shaper-1-1-1-3-0
- buffersize 0
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bredd 0 15min
- set-threshold fredd 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
-#
-#CLI:FLOW-1-1-1-4-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-4
+ add flow flow-1-1-1-4-1 "" regular-evc disabled disabled disabled disabled 0 disabled none push 828-0 "500-*,501-*,502-*" 0 10048000 access-interface access-1-1-1-4 network-interface network-1-1-1-1 flow-based n2a-prio-mapping-profile none a2n-prio-mapping-profile prio_map_profile-1
configure flow flow-1-1-1-4-1
admin-state in-service
- itag none
- circuit-name ""
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- access-interface access-1-1-1-4 network-interface network-1-1-1-1 push 777-0 push 828-0
- a2n-shaping-type flow-based
policing enabled
policing-control a2n-n2a
- net-to-acc-rate-limiting disabled
- default-cos 0
- priority-mapping-profile none
- pbb-frames disabled
+ ses-frame-loss-threshold-ratio 30
+ independent-a2n-shaper-bw disabled
+ n2a-outertag-prio-ctrl disabled
access-learning-ctrl none
network-learning-ctrl none
access-max-forwarding-entries 2048
@@ -2628,6 +2281,9 @@
aging-timer 300
table-full-action forward
n2n-forwarding disabled
+ a2n-multicast-rate-limit-ctrl disabled
+ a2n-broadcast-rate-limit-ctrl disabled
+ a2n-combined-rate-limit-ctrl disabled
cpd-filter isl pass-thru
cpd-filter pagp pass-thru
cpd-filter udld pass-thru
@@ -2638,37 +2294,37 @@
cpd-filter uplinkfast pass-thru
cpd-filter vlan-bridge pass-thru
cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam use-mac-setting
cpd-filter ssm discard
- cpd-filter port-authen pass-thru
+ cpd-filter port-authen use-mac-setting
cpd-filter lan-bridges pass-thru
cpd-filter gmrp pass-thru
cpd-filter gvrp pass-thru
cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
+ cpd-filter elmi use-mac-setting
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
pm
set-threshold abra2n 0 15min
set-threshold abrrla2n 0 15min
@@ -2704,6 +2360,10 @@
set-threshold ibrrln2amin 0 15min
set-threshold ibrn2a 0 15min
set-threshold ibrrln2a 0 15min
+ set-threshold fmcd 0 15min
+ set-threshold fbcd 0 15min
+ set-threshold acl-a2n-drop 0 15min
+ set-threshold acl-n2a-drop 0 15min
set-threshold abra2n 0 1day
set-threshold abrrla2n 0 1day
set-threshold abrn2a 0 1day
@@ -2738,12 +2398,16 @@
set-threshold ibrrln2amin 0 1day
set-threshold ibrn2a 0 1day
set-threshold ibrrln2a 0 1day
+ set-threshold fmcd 0 1day
+ set-threshold fbcd 0 1day
+ set-threshold acl-a2n-drop 0 1day
+ set-threshold acl-n2a-drop 0 1day
#
#CLI:A2N SHAPER-1-1-1-4-1-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-4
configure flow flow-1-1-1-4-1
configure a2n-shaper a2n_shaper-1-1-1-4-1-0
@@ -2752,6 +2416,13 @@
configure a2n-shaper a2n_shaper-1-1-1-4-1-0
soam-cir 0
soam-eir 0
+ max-drop-probability-green 100
+ max-threshold-green 100
+ min-threshold-green 100
+ max-drop-probability-yellow 100
+ max-threshold-yellow 75
+ min-threshold-yellow 75
+ avg-frame-size-before-frag 2024
back
configure a2n-shaper a2n_shaper-1-1-1-4-1-0
pm
@@ -2774,17 +2445,18 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-4
configure flow flow-1-1-1-4-1
configure a2n-policer a2n_policer-1-1-1-4-1-0
ebs 1024
- eir 100032000
- cir 0
- cbs 0
+ eir 10048000
color-marking enabled
color-mode color-aware
coupling-flag enabled
+ cir 0
+ cbs 0
+ envelope none
back
configure a2n-policer a2n_policer-1-1-1-4-1-0
pm
@@ -2805,10 +2477,13 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-4
configure flow flow-1-1-1-4-1
configure n2a-policer n2a_policer-1-1-1-4-1-0
+ envelope none
+ back
+ configure n2a-policer n2a_policer-1-1-1-4-1-0
pm
set-threshold fmg 0 15min
set-threshold fmy 0 15min
@@ -2823,261 +2498,54 @@
set-threshold bytesin 0 1day
set-threshold bytesout 0 1day
#
-#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
+#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-4
- configure n2a-shaper port_n2a_shaper-1-1-1-4-0
- buffersize 10
- soam-cir 0
- soam-eir 0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bredd 0 15min
- set-threshold fredd 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-1
+ lpbk
+ rls-lpbk
#
-#CLI:FLOW-1-1-1-5-1 Create
+#CLI:NETWORK PORT-1-1-1-2 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- add flow flow-1-1-1-5-1 "OIDS-CLINTON-L2CIRCUIT-CIR0005441" regular-evc disabled disabled disabled disabled 0 disabled none push 828-0 "10-*,210-*" 20032000 0 access-interface access-1-1-1-5 network-interface network-1-1-1-1 flow-based disabled none
- configure flow flow-1-1-1-5-1
- admin-state in-service
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- policing enabled
- policing-control a2n-n2a
- n2a-outertag-prio-ctrl disabled
- priority-mapping-profile none
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
- n2n-forwarding disabled
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
- pm
- set-threshold abra2n 0 15min
- set-threshold abrrla2n 0 15min
- set-threshold abrn2a 0 15min
- set-threshold abrrln2a 0 15min
- set-threshold l2cpfd 0 15min
- set-threshold bytesina2n 0 15min
- set-threshold bytesinn2a 0 15min
- set-threshold bytesouta2n 0 15min
- set-threshold bytesoutn2a 0 15min
- set-threshold fmga2n 0 15min
- set-threshold fmgn2a 0 15min
- set-threshold fmrda2n 0 15min
- set-threshold fmrdn2a 0 15min
- set-threshold fmya2n 0 15min
- set-threshold fmyn2a 0 15min
- set-threshold ftda2n 0 15min
- set-threshold ses 0 15min
- set-threshold uas 10 15min
- set-threshold fdhairpin 0 15min
- set-threshold fdstaticblock 0 15min
- set-threshold learntblentrydiscards 0 15min
- set-threshold numlearntblflushes 0 15min
- set-threshold ibra2nmax 0 15min
- set-threshold ibrrla2nmax 0 15min
- set-threshold ibra2nmin 0 15min
- set-threshold ibrrla2nmin 0 15min
- set-threshold ibra2n 0 15min
- set-threshold ibrrla2n 0 15min
- set-threshold ibrn2amax 0 15min
- set-threshold ibrrln2amax 0 15min
- set-threshold ibrn2amin 0 15min
- set-threshold ibrrln2amin 0 15min
- set-threshold ibrn2a 0 15min
- set-threshold ibrrln2a 0 15min
- set-threshold abra2n 0 1day
- set-threshold abrrla2n 0 1day
- set-threshold abrn2a 0 1day
- set-threshold abrrln2a 0 1day
- set-threshold l2cpfd 0 1day
- set-threshold bytesina2n 0 1day
- set-threshold bytesinn2a 0 1day
- set-threshold bytesouta2n 0 1day
- set-threshold bytesoutn2a 0 1day
- set-threshold fmga2n 0 1day
- set-threshold fmgn2a 0 1day
- set-threshold fmrda2n 0 1day
- set-threshold fmrdn2a 0 1day
- set-threshold fmya2n 0 1day
- set-threshold fmyn2a 0 1day
- set-threshold ftda2n 0 1day
- set-threshold ses 0 1day
- set-threshold uas 10 1day
- set-threshold fdhairpin 0 1day
- set-threshold fdstaticblock 0 1day
- set-threshold learntblentrydiscards 0 1day
- set-threshold numlearntblflushes 0 1day
- set-threshold ibra2nmax 0 1day
- set-threshold ibrrla2nmax 0 1day
- set-threshold ibra2nmin 0 1day
- set-threshold ibrrla2nmin 0 1day
- set-threshold ibra2n 0 1day
- set-threshold ibrrla2n 0 1day
- set-threshold ibrn2amax 0 1day
- set-threshold ibrrln2amax 0 1day
- set-threshold ibrn2amin 0 1day
- set-threshold ibrrln2amin 0 1day
- set-threshold ibrn2a 0 1day
- set-threshold ibrrln2a 0 1day
+ configure nte nte112pro-1-1-1
+ configure network-port network-1-1-1-2
+ lpbk
+ rls-lpbk
#
-#CLI:A2N SHAPER-1-1-1-5-1-0 Edit
+#CLI:CFM CNTRL Edit
#
home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure a2n-shaper a2n_shaper-1-1-1-5-1-0
- buffersize 1024
- back
- configure a2n-shaper a2n_shaper-1-1-1-5-1-0
- soam-cir 0
- soam-eir 0
- back
- configure a2n-shaper a2n_shaper-1-1-1-5-1-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bredd 0 15min
- set-threshold fredd 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
+configure cfm
+ signal-fail-defect-list rdi,rem-ccm
#
-#CLI:A2N POLICER-1-1-1-5-1-0 Edit
+#CLI:CFM SYSDEF MDLVL-1 Edit
#
home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure a2n-policer a2n_policer-1-1-1-5-1-0
- cir 20032000
- cbs 1024
- eir 0
- ebs 0
- color-marking enabled
- color-mode color-aware
- coupling-flag enabled
- back
- configure a2n-policer a2n_policer-1-1-1-5-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
+configure cfm
+ configure sysdef-md
+ md-level 0
+ mhf none
#
-#CLI:N2A POLICER-1-1-1-5-1-0 Edit
+#CLI:PORT N2A SHAPER-1-1-1-3-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure flow flow-1-1-1-5-1
- configure n2a-policer n2a_policer-1-1-1-5-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-5-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- configure n2a-shaper port_n2a_shaper-1-1-1-5-0
- buffersize 1024
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-3
+ configure n2a-shaper port_n2a_shaper-1-1-1-3-0
+ buffersize 10
soam-cir 0
soam-eir 0
+ max-drop-probability-green 100
+ max-threshold-green 100
+ min-threshold-green 100
+ max-drop-probability-yellow 100
+ max-threshold-yellow 75
+ min-threshold-yellow 75
pm
set-threshold bt 0 15min
set-threshold btd 0 15min
@@ -3094,235 +2562,22 @@
set-threshold bredd 0 1day
set-threshold fredd 0 1day
#
-#CLI:FLOW-1-1-1-6-1 Create
+#CLI:PORT N2A SHAPER-1-1-1-4-0 Edit
#
home
network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- add flow flow-1-1-1-6-1 "OIDS-CLINTON-10M-CIR0005441" regular-evc disabled disabled disabled disabled 0 disabled none push 828-0 "828-*,500-*,501-*" 20032000 0 access-interface access-1-1-1-6 network-interface network-1-1-1-1 flow-based disabled none
- configure flow flow-1-1-1-6-1
- admin-state in-service
- es-frame-loss-threshold 1
- ses-frame-loss-threshold-ratio 30
- policing enabled
- policing-control a2n-n2a
- n2a-outertag-prio-ctrl disabled
- priority-mapping-profile none
- access-learning-ctrl none
- network-learning-ctrl none
- access-max-forwarding-entries 2048
- network-max-forwarding-entries 2048
- protect-access-learning none
- protect-network-learning none
- aging-timer 300
- table-full-action forward
- n2n-forwarding disabled
- cpd-filter isl pass-thru
- cpd-filter pagp pass-thru
- cpd-filter udld pass-thru
- cpd-filter cdp pass-thru
- cpd-filter vtp pass-thru
- cpd-filter dtp pass-thru
- cpd-filter pvstp+ pass-thru
- cpd-filter uplinkfast pass-thru
- cpd-filter vlan-bridge pass-thru
- cpd-filter l2pt pass-thru
- cpd-filter bpdu pass-thru
- cpd-filter pause pass-thru
- cpd-filter lacp pass-thru
- cpd-filter lacp-marker pass-thru
- cpd-filter efm-oam pass-thru
- cpd-filter ssm discard
- cpd-filter port-authen pass-thru
- cpd-filter lan-bridges pass-thru
- cpd-filter gmrp pass-thru
- cpd-filter gvrp pass-thru
- cpd-filter garp pass-thru
- cpd-filter elmi pass-thru
- cpd-filter 01-80-c2-00-00-00 discard
- cpd-filter 01-80-c2-00-00-01 discard
- cpd-filter 01-80-c2-00-00-02 discard
- cpd-filter 01-80-c2-00-00-03 discard
- cpd-filter 01-80-c2-00-00-04 discard
- cpd-filter 01-80-c2-00-00-05 discard
- cpd-filter 01-80-c2-00-00-06 discard
- cpd-filter 01-80-c2-00-00-07 discard
- cpd-filter 01-80-c2-00-00-08 discard
- cpd-filter 01-80-c2-00-00-09 discard
- cpd-filter 01-80-c2-00-00-0a discard
- cpd-filter 01-80-c2-00-00-0b discard
- cpd-filter 01-80-c2-00-00-0c discard
- cpd-filter 01-80-c2-00-00-0d discard
- cpd-filter 01-80-c2-00-00-0e discard
- cpd-filter 01-80-c2-00-00-0f discard
- cpd-filter nearest-lldp discard
- cpd-filter non-tpmr-lldp discard
- cpd-filter customer-lldp discard
- pm
- set-threshold abra2n 0 15min
- set-threshold abrrla2n 0 15min
- set-threshold abrn2a 0 15min
- set-threshold abrrln2a 0 15min
- set-threshold l2cpfd 0 15min
- set-threshold bytesina2n 0 15min
- set-threshold bytesinn2a 0 15min
- set-threshold bytesouta2n 0 15min
- set-threshold bytesoutn2a 0 15min
- set-threshold fmga2n 0 15min
- set-threshold fmgn2a 0 15min
- set-threshold fmrda2n 0 15min
- set-threshold fmrdn2a 0 15min
- set-threshold fmya2n 0 15min
- set-threshold fmyn2a 0 15min
- set-threshold ftda2n 0 15min
- set-threshold ses 0 15min
- set-threshold uas 10 15min
- set-threshold fdhairpin 0 15min
- set-threshold fdstaticblock 0 15min
- set-threshold learntblentrydiscards 0 15min
- set-threshold numlearntblflushes 0 15min
- set-threshold ibra2nmax 0 15min
- set-threshold ibrrla2nmax 0 15min
- set-threshold ibra2nmin 0 15min
- set-threshold ibrrla2nmin 0 15min
- set-threshold ibra2n 0 15min
- set-threshold ibrrla2n 0 15min
- set-threshold ibrn2amax 0 15min
- set-threshold ibrrln2amax 0 15min
- set-threshold ibrn2amin 0 15min
- set-threshold ibrrln2amin 0 15min
- set-threshold ibrn2a 0 15min
- set-threshold ibrrln2a 0 15min
- set-threshold abra2n 0 1day
- set-threshold abrrla2n 0 1day
- set-threshold abrn2a 0 1day
- set-threshold abrrln2a 0 1day
- set-threshold l2cpfd 0 1day
- set-threshold bytesina2n 0 1day
- set-threshold bytesinn2a 0 1day
- set-threshold bytesouta2n 0 1day
- set-threshold bytesoutn2a 0 1day
- set-threshold fmga2n 0 1day
- set-threshold fmgn2a 0 1day
- set-threshold fmrda2n 0 1day
- set-threshold fmrdn2a 0 1day
- set-threshold fmya2n 0 1day
- set-threshold fmyn2a 0 1day
- set-threshold ftda2n 0 1day
- set-threshold ses 0 1day
- set-threshold uas 10 1day
- set-threshold fdhairpin 0 1day
- set-threshold fdstaticblock 0 1day
- set-threshold learntblentrydiscards 0 1day
- set-threshold numlearntblflushes 0 1day
- set-threshold ibra2nmax 0 1day
- set-threshold ibrrla2nmax 0 1day
- set-threshold ibra2nmin 0 1day
- set-threshold ibrrla2nmin 0 1day
- set-threshold ibra2n 0 1day
- set-threshold ibrrla2n 0 1day
- set-threshold ibrn2amax 0 1day
- set-threshold ibrrln2amax 0 1day
- set-threshold ibrn2amin 0 1day
- set-threshold ibrrln2amin 0 1day
- set-threshold ibrn2a 0 1day
- set-threshold ibrrln2a 0 1day
-#
-#CLI:A2N SHAPER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure a2n-shaper a2n_shaper-1-1-1-6-1-0
- buffersize 1024
- back
- configure a2n-shaper a2n_shaper-1-1-1-6-1-0
- soam-cir 0
- soam-eir 0
- back
- configure a2n-shaper a2n_shaper-1-1-1-6-1-0
- pm
- set-threshold bt 0 15min
- set-threshold btd 0 15min
- set-threshold fd 0 15min
- set-threshold ftd 0 15min
- set-threshold abrrl 0 15min
- set-threshold bredd 0 15min
- set-threshold fredd 0 15min
- set-threshold bt 0 1day
- set-threshold btd 0 1day
- set-threshold fd 0 1day
- set-threshold ftd 0 1day
- set-threshold abrrl 0 1day
- set-threshold bredd 0 1day
- set-threshold fredd 0 1day
-#
-#CLI:A2N POLICER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure a2n-policer a2n_policer-1-1-1-6-1-0
- cir 20032000
- cbs 1024
- eir 0
- ebs 0
- color-marking enabled
- color-mode color-aware
- coupling-flag enabled
- back
- configure a2n-policer a2n_policer-1-1-1-6-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:N2A POLICER-1-1-1-6-1-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure flow flow-1-1-1-6-1
- configure n2a-policer n2a_policer-1-1-1-6-1-0
- pm
- set-threshold fmg 0 15min
- set-threshold fmy 0 15min
- set-threshold fmrd 0 15min
- set-threshold abr 0 15min
- set-threshold bytesin 0 15min
- set-threshold bytesout 0 15min
- set-threshold fmg 0 1day
- set-threshold fmy 0 1day
- set-threshold fmrd 0 1day
- set-threshold abr 0 1day
- set-threshold bytesin 0 1day
- set-threshold bytesout 0 1day
-#
-#CLI:PORT N2A SHAPER-1-1-1-6-0 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- configure n2a-shaper port_n2a_shaper-1-1-1-6-0
- buffersize 1024
+ configure nte nte112pro-1-1-1
+ configure access-port access-1-1-1-4
+ configure n2a-shaper port_n2a_shaper-1-1-1-4-0
+ buffersize 10
soam-cir 0
soam-eir 0
+ max-drop-probability-green 100
+ max-threshold-green 100
+ min-threshold-green 100
+ max-drop-probability-yellow 100
+ max-threshold-yellow 75
+ min-threshold-yellow 75
pm
set-threshold bt 0 15min
set-threshold btd 0 15min
@@ -3339,43 +2594,11 @@
set-threshold bredd 0 1day
set-threshold fredd 0 1day
#
-#CLI:NETWORK PORT-1-1-1-1 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-1
- lpbk
- rls-lpbk
-#
-#CLI:NETWORK PORT-1-1-1-2 Edit
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure network-port network-1-1-1-2
- lpbk
- rls-lpbk
-#
-#CLI:CFM CNTRL Edit
-#
-home
-configure cfm
- signal-fail-defect-list rdi,rem-ccm
-#
-#CLI:CFM SYSDEF MDLVL-1 Edit
-#
-home
-configure cfm
- configure sysdef-md
- md-level 0
- mhf none
-#
#CLI:MOBILE MODEM-1-1-1-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure usb
add mobile-modem
back
@@ -3387,12 +2610,6 @@
dial-number ""
redial-timer 10
#
-#CLI:SYSTEM FEATURE-1 Edit
-#
-home
-admin sw-license
- configure feature "PBB" disabled
-#
#CLI:LLDP SYS Edit
#
home
@@ -3411,7 +2628,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-3
lldp
add acc-port-config 1
@@ -3426,7 +2643,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure access-port access-1-1-1-4
lldp
add acc-port-config 1
@@ -3437,41 +2654,11 @@
snmp-notification disabled
basic-tlv-supported port-description,sys-name,sys-description,sys-cap
#
-#CLI:LLDP ACC PORT CONFIG-1-1-1-5-1 Create
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-5
- lldp
- add acc-port-config 1
- back
- lldp
- configure acc-port-config 1
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
-#CLI:LLDP ACC PORT CONFIG-1-1-1-6-1 Create
-#
-home
-network-element ne-1
- configure nte nte114-1-1-1
- configure access-port access-1-1-1-6
- lldp
- add acc-port-config 1
- back
- lldp
- configure acc-port-config 1
- admin-status disabled
- snmp-notification disabled
- basic-tlv-supported port-description,sys-name,sys-description,sys-cap
-#
#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Create
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-1
lldp
add net-port-config 1
@@ -3486,7 +2673,7 @@
#
home
network-element ne-1
- configure nte nte114-1-1-1
+ configure nte nte112pro-1-1-1
configure network-port network-1-1-1-2
lldp
add net-port-config 1
@@ -3516,21 +2703,57 @@
#
home
configure communication
- add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.105 "LTP" 1 disabled
+ add ip-route nexthop 0.0.0.0 0.0.0.0 10.199.192.105 "MGMT" 1 disabled
+#
+#CLI:SYSTEM FEATURE-1 Edit
+#
+home
+admin sw-license
+ configure feature "OpenFlow" disabled
+#
+#CLI:SYSTEM FEATURE-2 Edit
+#
+home
+admin sw-license
+ configure feature "IP-Services-and-ACL-Filtering" disabled
+#
+#CLI:SYSTEM FEATURE-3 Edit
+#
+home
+admin sw-license
+ configure feature "Extended-Scale-IP-services" disabled
+#
+#CLI:SYSTEM FEATURE-4 Edit
+#
+home
+admin sw-license
+ configure feature "EoMPLS" disabled
+#
+#CLI:SYSTEM FEATURE-5 Edit
+#
+home
+admin sw-license
+ configure feature "Vxlan" disabled
+#
+#CLI:SYSTEM FEATURE-6 Edit
+#
+home
+admin sw-license
+ configure feature "EoMPLSoGRE" disabled
#end
home
admin config-file
# NetworkElement
# ADVA-NE-1--> show slot-info 1
# Slot Type : generic-slot
-# Card Type : nte114
-# Physical Entity Name : FSP150CC-GE114
-# MAC Address : 00:80:ea:6d:cc:e0
-# Software Revision : 8.1.1-164
-# Firmware Revision : 87458l
+# Card Type : nte112pro
+# Physical Entity Name : GE112Pro
+# MAC Address : 00:80:ea:7a:3b:60
+# Software Revision : 8.5.1-219
+# Firmware Revision : 96460
# Hardware Revision : 1.01
-# USI : LBADVA71152600356
+# USI : LBADVA71163400888
# CLEI Code : Pending
-# Part Number : 1078904620-01
-# Manufacturer Date : 2015-06-25
+# Part Number : 1078904701-01
+# Manufacturer Date : 2016-08-19
# Manufacturer Site : Shenzhen
Index: routers.down
===================================================================
--- routers.down (revision 158640)
+++ routers.down (working copy)
@@ -106,6 +106,7 @@
mercy-hospital-ada.client.onenet.net:juniper:down
mwc-2912switch:cisco:down
ne-area-votech-pryor.client.onenet.net:juniper:down
+norman-hs.nid.onenet.net:fsp150:down
odmhsas-sas-okc.client.onenet.net:juniper:down
odot-eufaula-regmaint.client.onenet.net:juniper:down
okdepvotec-2950custend1.onenet.net:cisco:down
Index: routers.all
===================================================================
--- routers.all (revision 158642)
+++ routers.all (working copy)
@@ -503,6 +503,7 @@
mhsso-tishomingo.client.onenet.net:juniper
miami-ps-srx220.client.onenet.net:juniper
mid-america-tech-ctr.client.onenet.net:juniper
+midcon-okc.nid.onenet.net:fsp150
midway-ps-ge112.nid.onenet.net:fsp150
midway-ps.client.onenet.net:juniper
millwood-ps.nid.onenet.net:fsp150
@@ -614,6 +615,7 @@
oeta-guymon-tower.nid.onenet.net:fsp150
oeta-ponca-city-tower.nid.onenet.net:fsp150
oids-clinton.nid.onenet.net:fsp150
+oids-mangum.nid.onenet.net:fsp150
oids-okmulgee.client.onenet.net:juniper
oja-sw-youth-academy-manitou.client.onenet.net:juniper
ok-christian-uni.nid.onenet.net:fsp150
More information about the Nocrancid
mailing list