[Nocrancid] autopop-onenet.net router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Mon Mar 13 17:04:18 CDT 2017
Index: router.db
===================================================================
--- router.db (revision 151468)
+++ router.db (working copy)
@@ -721,6 +721,7 @@
tuskahoma-ps.nid.onenet.net:fsp150:up
ub.say.onenet.net:cisco:down
union-city-ps.client.onenet.net:juniper:up
+university-of-tulsa.nid.onenet.net:fsp150:up
VICI-PUBLIC-SCHOOLS.client.onenet.net:juniper:up
vin-adva.p.onenet.net:fsp3000:up
vinita-public-library-srx220.onenet.net:juniper:down
Index: routers.up
===================================================================
--- routers.up (revision 151213)
+++ routers.up (working copy)
@@ -604,6 +604,7 @@
tuskahoma-ps.client.onenet.net:juniper
tuskahoma-ps.nid.onenet.net:fsp150
union-city-ps.client.onenet.net:juniper
+university-of-tulsa.nid.onenet.net:fsp150
vici-public-schools.client.onenet.net:juniper
vin-adva.p.onenet.net:fsp3000
vinita-public-library.client.onenet.net:juniper
Index: configs/allen-public-library.client.onenet.net
===================================================================
--- configs/allen-public-library.client.onenet.net (revision 151462)
+++ configs/allen-public-library.client.onenet.net (working copy)
@@ -135,8 +135,8 @@
#ge-0/0/1.0 up down
#ge-0/0/2 up up
#ge-0/0/2.0 up up
-#ge-0/0/3 up up
-#ge-0/0/3.0 up up
+#ge-0/0/3 up down
+#ge-0/0/3.0 up down
#ge-0/0/4 up up
#ge-0/0/4.0 up up
#ge-0/0/5 up up
Index: configs/university-of-tulsa.nid.onenet.net
===================================================================
--- configs/university-of-tulsa.nid.onenet.net (revision 151469)
+++ configs/university-of-tulsa.nid.onenet.net (working copy)
@@ -0,0 +1,2856 @@
+# RANCID-CONTENT-TYPE: fsp150
+#
+# ADVA--> show running-config current
+Preparing configuration file...
+# WARNING: This config file contains the full configuration and the following may not work:
+# * Restart with this config file
+# * Loading this config file after restart from system defaults as it is a full configuration
+# * Running snippets from this config file as it may contain commands that are not applicable in the current mode the system entities are in
+#
+#CLI:SYSTEM FEATURE-1 Edit
+#
+home
+admin sw-license
+ configure feature "PTP" disabled
+#
+#CLI:SYSTEM FEATURE-2 Edit
+#
+home
+admin sw-license
+ configure feature "PTP-MC/BC" disabled
+#
+#CLI:SYSTEM FEATURE-4 Edit
+#
+home
+admin sw-license
+ configure feature "PTP-Extended-Remote-Slaves" disabled
+#
+#CLI:SYSTEM FEATURE-9 Edit
+#
+home
+admin sw-license
+ configure feature "PTP-BC-Mediation" disabled
+#
+#CLI:SUBNETWORK Edit
+#
+home
+configure system
+ prompt "ADVA"
+#
+#CLI:SYSTEM Edit
+#
+home
+configure system
+ auth-traps disabled
+ serial enabled
+ serial-disconnect-logoff enabled
+ http enabled
+ https enabled
+ telnet disabled
+ scp enabled
+ ftp disabled
+ sftp enabled
+ long-if-alias disabled
+ security-banner "WARNING: UNAUTHORIZED USE IS STRICTLY PROHIBITED\\n\\nTo protect the system from unauthorized use,\\nactivities on this system are monitored,recorded and subject to audit.\\nUse of this system is expressed consent to such monitoring and recording.\\nAny unauthorized access or use of this system is prohibited and\\nis subject to criminal and civil penalties and/or administrative action."
+ security-prompt disabled
+ ssh enabled
+ snmp-engine-id "800009f0030080ea682108"
+ log-server-method user-defined
+ ntp-server-method user-defined
+ time-zone
+ dst-control enabled
+ utc-offset "-06:00"
+ dst-offset "+01:00"
+ dst-start-month march
+ dst-end-month november
+ dst-start-day "SUNDAY>=8"
+ dst-end-day "SUNDAY<=7"
+ dst-start-time "02:00"
+ dst-end-time "02:00"
+ back
+ proxy-arp disabled
+ proxy-ndp disabled
+ ipv6-fwd disabled
+ mgmt-traffic-dscp-value 0
+ mgmt-traffic-dscp-control disabled
+ alarm-attributes system prim-ntp-svr-fail nsa mn
+ alarm-attributes system sec-ntp-svr-fail nsa mn
+ alarm-attributes system swdl-filetransfer-ip nsa nr
+ alarm-attributes system swdl-install-ip nsa nr
+ alarm-attributes system swdl-activation-ip nsa nr
+ alarm-attributes system swdl-validation-ip nsa nr
+ alarm-attributes system db-filetransfer-ip nsa nr
+ alarm-attributes system snmp-dg-host-unreachable nsa mn
+ alarm-attributes system snmp-dg-res-busy nsa mn
+ alarm-attributes system ip-address-conflict sa cr
+ alarm-attributes system db-downgrade nsa nr
+ alarm-attributes system filetransfer-ip nsa nr
+ alarm-attributes system operation-ip nsa nr
+ alarm-attributes system ltp-failure sa mj
+ alarm-attributes system ltp-in-progress nsa na
+ alarm-attributes system learn-table-full sa cr
+ alarm-attributes system ipv6-addr-conflict sa cr
+ alarm-attributes system dataexport-ftp-fail nsa mn
+ alarm-attributes fan comm-failed nsa mn
+ alarm-attributes fan eqpt-flt nsa mj
+ alarm-attributes fan mismatch nsa mn
+ alarm-attributes fan eqpt-rmvd nsa mj
+ alarm-attributes psu comm-failed nsa mn
+ alarm-attributes psu eqpt-flt nsa mn
+ alarm-attributes psu mismatch nsa mn
+ alarm-attributes psu eqpt-rmvd nsa mn
+ alarm-attributes psu pwr-no-input-or-unit-fault nsa mn
+ alarm-attributes access-port efm-oam-dying-gasp nsa mn
+ alarm-attributes access-port efm-oam-dying-gasp sa cr
+ alarm-attributes access-port efm-fail nsa mn
+ alarm-attributes access-port efm-fail sa mn
+ alarm-attributes access-port efm-rce nsa mn
+ alarm-attributes access-port efm-rce sa mn
+ alarm-attributes access-port efm-rld nsa mn
+ alarm-attributes access-port efm-rld sa mn
+ alarm-attributes access-port efm-rls nsa mn
+ alarm-attributes access-port efm-rls sa mn
+ alarm-attributes access-port lnkdn-deact nsa mn
+ alarm-attributes access-port lnkdn-deact sa cr
+ alarm-attributes access-port lnkdn-unisolated nsa mn
+ alarm-attributes access-port lnkdn-unisolated sa cr
+ alarm-attributes access-port lnkdn-cbl-flt nsa mn
+ alarm-attributes access-port lnkdn-cbl-flt sa cr
+ alarm-attributes access-port lnkdn-cbl-rmvd nsa mn
+ alarm-attributes access-port lnkdn-cbl-rmvd sa cr
+ alarm-attributes access-port lnkdn-autoneg-failed nsa mn
+ alarm-attributes access-port lnkdn-autoneg-failed sa cr
+ alarm-attributes access-port lnkdn-lpbk-flt nsa mn
+ alarm-attributes access-port lnkdn-lpbk-flt sa cr
+ alarm-attributes access-port lnkdn nsa mn
+ alarm-attributes access-port lnkdn sa cr
+ alarm-attributes access-port rfi nsa mn
+ alarm-attributes access-port rfi sa mn
+ alarm-attributes access-port rx-jabber nsa mn
+ alarm-attributes access-port rx-jabber sa mj
+ alarm-attributes access-port sfp-mismatch nsa mn
+ alarm-attributes access-port sfp-mismatch sa cr
+ alarm-attributes access-port sfp-rmvd nsa mn
+ alarm-attributes access-port sfp-rmvd sa cr
+ alarm-attributes access-port sfp-tx-flt nsa mn
+ alarm-attributes access-port sfp-tx-flt sa cr
+ alarm-attributes access-port rmt-efm-lpbk-fail nsa na
+ alarm-attributes access-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes access-port syncref nsa mn
+ alarm-attributes access-port esmc-fail nsa mn
+ alarm-attributes access-port ql-mismatch nsa mn
+ alarm-attributes access-port freq-offset nsa mn
+ alarm-attributes access-port sync-ql-invalid nsa mn
+ alarm-attributes access-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes access-port bw-exceeds-neg-speed sa mj
+ alarm-attributes access-port sfp-non-qualified nsa nr
+ alarm-attributes access-port lnkdn-master-slave-cfg nsa mn
+ alarm-attributes access-port lnkdn-master-slave-cfg sa cr
+ alarm-attributes access-port syncref-locked-out nsa mn
+ alarm-attributes access-port syncref-forced-switch nsa mn
+ alarm-attributes access-port syncref-manual-switch nsa mn
+ alarm-attributes access-port syncref-wtr nsa mn
+ alarm-attributes access-port link-control-protocol-fail nsa mn
+ alarm-attributes access-port link-control-protocol-fail sa cr
+ alarm-attributes access-port link-control-protocol-loopback nsa mn
+ alarm-attributes access-port link-control-protocol-loopback sa cr
+ alarm-attributes access-port test-alarm nsa mj
+ alarm-attributes access-port xfp-tx-fault nsa mn
+ alarm-attributes access-port xfp-tx-fault sa cr
+ alarm-attributes access-port xfp-mismatch nsa mn
+ alarm-attributes access-port xfp-mismatch sa cr
+ alarm-attributes access-port xfp-non-qualified nsa mn
+ alarm-attributes access-port xfp-removed nsa mn
+ alarm-attributes access-port xfp-removed sa cr
+ alarm-attributes access-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes access-port elmi-not-oper nsa mn
+ alarm-attributes access-port autoneg-bypass nsa mn
+ alarm-attributes access-port amp-no-peer sa mj
+ alarm-attributes access-port amp-prov-fail nsa mn
+ alarm-attributes access-port amp-config-fail sa cr
+ alarm-attributes access-port xfp-wavelength-mismatch nsa mn
+ alarm-attributes access-port xfp-wavelength-mismatch sa cr
+ alarm-attributes access-port loopback-active nsa na
+ alarm-attributes access-port loopback-request nsa na
+ alarm-attributes access-port traff-res-limit-exc nsa mn
+ alarm-attributes access-port traff-res-limit-exc sa cr
+ alarm-attributes access-port bw-exceeds-port-speed sa na
+ alarm-attributes network-port forced nsa na
+ alarm-attributes network-port lockout nsa na
+ alarm-attributes network-port efm-oam-dying-gasp nsa mn
+ alarm-attributes network-port efm-oam-dying-gasp sa cr
+ alarm-attributes network-port efm-fail nsa mn
+ alarm-attributes network-port efm-fail sa mn
+ alarm-attributes network-port efm-rce nsa mn
+ alarm-attributes network-port efm-rce sa mn
+ alarm-attributes network-port efm-rld nsa mn
+ alarm-attributes network-port efm-rld sa mn
+ alarm-attributes network-port efm-rls nsa mn
+ alarm-attributes network-port efm-rls sa mn
+ alarm-attributes network-port lnkdn-deact nsa mn
+ alarm-attributes network-port lnkdn-deact sa cr
+ alarm-attributes network-port lnkdn-unisolated nsa mn
+ alarm-attributes network-port lnkdn-unisolated sa cr
+ alarm-attributes network-port lnkdn-lpbk-flt nsa mn
+ alarm-attributes network-port lnkdn-lpbk-flt sa cr
+ alarm-attributes network-port lnkdn nsa mn
+ alarm-attributes network-port lnkdn sa cr
+ alarm-attributes network-port rfi nsa mn
+ alarm-attributes network-port rfi sa mn
+ alarm-attributes network-port rx-jabber nsa mn
+ alarm-attributes network-port rx-jabber sa mj
+ alarm-attributes network-port rmt-efm-lpbk-fail nsa na
+ alarm-attributes network-port rmt-efm-lpbk-fail sa mn
+ alarm-attributes network-port syncref nsa mn
+ alarm-attributes network-port esmc-fail nsa mn
+ alarm-attributes network-port ql-mismatch nsa mn
+ alarm-attributes network-port freq-offset nsa mn
+ alarm-attributes network-port los sa cr
+ alarm-attributes network-port sync-ql-invalid nsa mn
+ alarm-attributes network-port bw-exceeds-neg-speed nsa mn
+ alarm-attributes network-port bw-exceeds-neg-speed sa mj
+ alarm-attributes network-port syncref-locked-out nsa mn
+ alarm-attributes network-port syncref-forced-switch nsa mn
+ alarm-attributes network-port syncref-manual-switch nsa mn
+ alarm-attributes network-port syncref-wtr nsa mn
+ alarm-attributes network-port link-control-protocol-fail nsa mn
+ alarm-attributes network-port link-control-protocol-fail sa cr
+ alarm-attributes network-port link-control-protocol-loopback nsa mn
+ alarm-attributes network-port link-control-protocol-loopback sa cr
+ alarm-attributes network-port test-alarm nsa mj
+ alarm-attributes network-port xfp-tx-fault nsa mn
+ alarm-attributes network-port xfp-tx-fault sa cr
+ alarm-attributes network-port xfp-mismatch nsa mn
+ alarm-attributes network-port xfp-mismatch sa cr
+ alarm-attributes network-port xfp-non-qualified nsa mn
+ alarm-attributes network-port xfp-removed nsa mn
+ alarm-attributes network-port xfp-removed sa cr
+ alarm-attributes network-port elmi-seq-no-mismatch nsa mn
+ alarm-attributes network-port elmi-not-oper nsa mn
+ alarm-attributes network-port amp-no-peer sa mj
+ alarm-attributes network-port amp-prov-fail nsa mn
+ alarm-attributes network-port amp-config-fail sa cr
+ alarm-attributes network-port xfp-wavelength-mismatch nsa mn
+ alarm-attributes network-port xfp-wavelength-mismatch sa cr
+ alarm-attributes network-port loopback-active nsa na
+ alarm-attributes network-port loopback-request nsa na
+ alarm-attributes network-port traff-res-limit-exc nsa mn
+ alarm-attributes network-port traff-res-limit-exc sa cr
+ alarm-attributes network-port bw-exceeds-port-speed sa na
+ alarm-attributes cfm-mep xcon-ccm sa mn
+ alarm-attributes cfm-mep err-ccm sa mn
+ alarm-attributes cfm-mep rem-ccm sa mn
+ alarm-attributes cfm-mep mac-status sa mn
+ alarm-attributes cfm-mep rdi sa mn
+ alarm-attributes cfm-mep ais sa nr
+ alarm-attributes sync frngsync nsa nr
+ alarm-attributes sync fstsync nsa nr
+ alarm-attributes sync hldovrsync nsa nr
+ alarm-attributes sync losloc nsa nr
+ alarm-attributes sync all-syncref nsa mj
+ alarm-attributes sync avg-hldovr-freq-not-ready nsa nr
+ alarm-attributes sync sync-not-ready nsa nr
+ alarm-attributes sync timeref-locked-out nsa mn
+ alarm-attributes sync timeref-forced-switch nsa mn
+ alarm-attributes sync timeref-unavailable nsa mn
+ alarm-attributes sync timeref-degraded nsa mn
+ alarm-attributes sync timeref-unavailable-wtr nsa mn
+ alarm-attributes sync timeref-degraded-wtr nsa mn
+ alarm-attributes bits-in-port ais nsa nr
+ alarm-attributes bits-in-port syncref nsa mn
+ alarm-attributes bits-in-port ql-mismatch nsa mn
+ alarm-attributes bits-in-port freq-offset nsa mn
+ alarm-attributes bits-in-port los nsa mn
+ alarm-attributes bits-in-port lof nsa mn
+ alarm-attributes bits-in-port sync-ql-invalid nsa mn
+ alarm-attributes bits-in-port syncref-locked-out nsa mn
+ alarm-attributes bits-in-port syncref-forced-switch nsa mn
+ alarm-attributes bits-in-port syncref-manual-switch nsa mn
+ alarm-attributes bits-in-port syncref-wtr nsa mn
+ alarm-attributes bits-out-port ql-squelch nsa mn
+ alarm-attributes cfm-qos-shaper shaper-btd nsa na
+ alarm-attributes dcn-port lnkdn nsa na
+ alarm-attributes 10mhz-port syncref nsa mn
+ alarm-attributes 10mhz-port freq-offset nsa mn
+ alarm-attributes 10mhz-port los nsa mn
+ alarm-attributes 10mhz-port ql-squelch nsa mn
+ alarm-attributes 10mhz-port syncref-locked-out nsa mn
+ alarm-attributes 10mhz-port syncref-forced-switch nsa mn
+ alarm-attributes 10mhz-port syncref-manual-switch nsa mn
+ alarm-attributes 10mhz-port syncref-wtr nsa mn
+ alarm-attributes lag lnkdn-deact sa cr
+ alarm-attributes lag lnkdn sa cr
+ alarm-attributes lag link-control-protocol-fail nsa mn
+ alarm-attributes lag link-control-protocol-fail sa cr
+ alarm-attributes lag link-control-protocol-loopback nsa mn
+ alarm-attributes lag link-control-protocol-loopback sa cr
+ alarm-attributes lag amp-no-peer sa mj
+ alarm-attributes lag amp-prov-fail nsa mn
+ alarm-attributes lag amp-config-fail sa cr
+ alarm-attributes lag loopback-active nsa na
+ alarm-attributes lag loopback-request nsa na
+ alarm-attributes lag service-discarded sa na
+ alarm-attributes shelf-xg210 overtemp nsa mj
+ alarm-attributes shelf-xg210 undertemp nsa mj
+ alarm-attributes shelf-xg210 overvoltage nsa mn
+ alarm-attributes shelf-xg210 undervoltage nsa mn
+ alarm-attributes ntexg210 comm-failed nsa mn
+ alarm-attributes ntexg210 eqpt-flt sa cr
+ alarm-attributes ntexg210 mismatch sa cr
+ alarm-attributes ntexg210 eqpt-rmvd sa cr
+ alarm-attributes ntexg210 test-alarm nsa mj
+ alarm-attributes xg-1x-cc eqpt-flt sa cr
+ alarm-attributes xg-1x-cc mismatch sa cr
+ alarm-attributes xg-1x-cc eqpt-rmvd sa cr
+ alarm-attributes xg-1x-cc test-alarm nsa mj
+ alarm-attributes xg-1s-cc eqpt-flt sa cr
+ alarm-attributes xg-1s-cc mismatch sa cr
+ alarm-attributes xg-1s-cc eqpt-rmvd sa cr
+ alarm-attributes xg-1s-cc test-alarm nsa mj
+ alarm-attributes ge-8s-cc eqpt-flt sa cr
+ alarm-attributes ge-8s-cc mismatch sa cr
+ alarm-attributes ge-8s-cc eqpt-rmvd sa cr
+ alarm-attributes ge-8s-cc test-alarm nsa mj
+ alarm-attributes telecom-slave syncref nsa mn
+ alarm-attributes telecom-slave ql-mismatch nsa mn
+ alarm-attributes telecom-slave freq-offset nsa mn
+ alarm-attributes telecom-slave sync-ql-invalid nsa mn
+ alarm-attributes telecom-slave syncref-locked-out nsa mn
+ alarm-attributes telecom-slave syncref-forced-switch nsa mn
+ alarm-attributes telecom-slave syncref-manual-switch nsa mn
+ alarm-attributes telecom-slave syncref-wtr nsa mn
+ alarm-attributes telecom-slave all-soocs-failed sa cr
+ alarm-attributes telecom-slave recovered-clk-not-hldovr-quality nsa nr
+ alarm-attributes telecom-slave ts-in-freerun nsa nr
+ alarm-attributes telecom-slave ts-in-hldovr nsa nr
+ alarm-attributes telecom-slave sj-no-time-lock sa mj
+ alarm-attributes telecom-slave sj-no-freq-lock sa mj
+ alarm-attributes telecom-slave timeref-locked-out nsa mn
+ alarm-attributes telecom-slave timeref-forced-switch nsa mn
+ alarm-attributes telecom-slave timeref-unavailable nsa mn
+ alarm-attributes telecom-slave timeref-degraded nsa mn
+ alarm-attributes telecom-slave telecom-slave-time-freerun nsa nr
+ alarm-attributes telecom-slave telecom-slave-time-holdover nsa nr
+ alarm-attributes telecom-slave timeref-unavailable-wtr nsa mn
+ alarm-attributes telecom-slave timeref-degraded-wtr nsa mn
+ alarm-attributes sooc ptsf-loss-announce nsa mn
+ alarm-attributes sooc ptsf-loss-sync nsa mn
+ alarm-attributes sooc ptsf-unusable nsa mn
+ alarm-attributes slot intctneqpt nsa mn
+ alarm-attributes slot forced-offline nsa mn
+ alarm-attributes slot forced-offline sa cr
+ alarm-attributes erp-group erp-fop-mismatch sa mj
+ alarm-attributes erp-group erp-fop-timeout nsa mn
+ alarm-attributes erp-group erp-blockport0-rpl nsa nr
+ alarm-attributes erp-group erp-blockport0-sf nsa na
+ alarm-attributes erp-group erp-blockport0-ms nsa na
+ alarm-attributes erp-group erp-blockport0-fs nsa na
+ alarm-attributes erp-group erp-blockport0-wtr nsa na
+ alarm-attributes erp-group erp-blockport1-rpl nsa nr
+ alarm-attributes erp-group erp-blockport1-sf nsa na
+ alarm-attributes erp-group erp-blockport1-ms nsa na
+ alarm-attributes erp-group erp-blockport1-fs nsa na
+ alarm-attributes erp-group erp-blockport1-wtr nsa na
+ alarm-attributes erp-group erp-ring-segmentation nsa na
+ alarm-attributes time-of-day-port ql-squelch nsa mn
+ alarm-attributes pps-port ql-squelch nsa mn
+ alarm-attributes ge-8e-cc eqpt-flt sa cr
+ alarm-attributes ge-8e-cc mismatch sa cr
+ alarm-attributes ge-8e-cc eqpt-rmvd sa cr
+ alarm-attributes ge-8e-cc test-alarm nsa mj
+ alarm-attributes sat-responder-session remote-initiated-sat nsa mn
+ alarm-attributes ptp-clock syncref nsa mn
+ alarm-attributes ptp-clock ql-mismatch nsa mn
+ alarm-attributes ptp-clock sync-ql-invalid nsa mn
+ alarm-attributes ptp-clock syncref-locked-out nsa mn
+ alarm-attributes ptp-clock syncref-forced-switch nsa mn
+ alarm-attributes ptp-clock syncref-manual-switch nsa mn
+ alarm-attributes ptp-clock syncref-wtr nsa mn
+ alarm-attributes ptp-clock timeref-locked-out nsa mn
+ alarm-attributes ptp-clock timeref-forced-switch nsa mn
+ alarm-attributes ptp-clock timeref-unavailable nsa mn
+ alarm-attributes ptp-clock timeref-degraded nsa mn
+ alarm-attributes ptp-clock timeref-unavailable-wtr nsa mn
+ alarm-attributes ptp-clock timeref-degraded-wtr nsa mn
+ alarm-attributes ptp-clock ptp-clock-in-time-freerun nsa nr
+ alarm-attributes ptp-clock ptp-clock-in-time-hldovr nsa nr
+ alarm-attributes ptp-clock ptp-clock-time-not-traceable nsa mj
+ alarm-attributes ptp-clock ptp-clock-freq-not-traceable nsa mn
+ alarm-attributes ptp-clock ptp-clock-in-freq-freerun nsa nr
+ alarm-attributes ptp-clock ptp-clock-in-freq-hldovr nsa nr
+ alarm-attributes ptp-port announce-timeout nsa mn
+ alarm-attributes ptp-port sync-timeout nsa mn
+ alarm-attributes ptp-port delay-resp-timeout nsa mn
+ alarm-attributes ptp-port multiple-peers sa mj
+ alarm-attributes ptp-port wrong-domain sa mj
+ syslog-server 1
+ configure ip-version ipv4
+ configure port 514
+ back
+ syslog-server 2
+ configure ip-version ipv4
+ configure port 514
+ back
+ syslog-server 3
+ configure ip-version ipv4
+ configure port 514
+ back
+ audit-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ security-log
+ syslog-control disabled
+ back
+ alarm-log
+ syslog-control disabled
+ log2file-control enabled
+ back
+ ntp-client
+ control enabled
+ polling-interval 16
+ primary-server ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ primary-server ipv4 164.58.3.98
+ backup-server ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ backup-server ipv4 164.58.29.14
+ back
+ acl-entry 1
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 2
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 3
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 4
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 5
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 6
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 7
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 8
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 9
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 10
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 11
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 12
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 13
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 14
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 15
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 16
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 17
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 18
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 19
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 20
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 21
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 22
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 23
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 24
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ acl-entry 25
+ control disabled
+ configure permit 0.0.0.0 255.255.255.255
+ back
+ system-tod-type ntp
+#
+#CLI:SECURITY SYSTEM Edit
+#
+home
+configure user-security
+ access-order local
+ auth-protocol radius
+ auth-type pap
+ nas-ip-address 10.199.192.46
+ nas-ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ security-strength high
+ accounting disabled
+ config-ssl-strength low
+ tacacs-privilege-control enabled
+ security-trap-type disabled
+ privilege-mgmt-control disabled
+ privilege-response-timeout 5
+ config-rap 1
+ ip-address 156.110.31.11
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order first
+ timeout 3
+ retries 5
+ control enabled
+ ip-version ipv4
+ back
+ config-rap 2
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order second
+ timeout 3
+ retries 5
+ ip-version ipv4
+ back
+ config-rap 3
+ control disabled
+ ip-address 0.0.0.0
+ ipv6-address 0000:0000:0000:0000:0000:0000:0000:0000
+ port 1812
+ accounting-port 1813
+ order third
+ timeout 3
+ retries 5
+ ip-version ipv4
+#
+#CLI:ENV ALARM INPUT-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-1
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-2
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-3
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-4
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:MANAGEMENT TUNNEL-1 Delete
+#
+home
+configure communication
+ delete mgmttnl mgmt_tnl-1
+#
+#CLI:IP SYSTEM Edit
+#
+home
+configure system
+ mgmt-traffic-bridge disabled
+ mgmt-traffic-bridge-security disabled
+#
+#CLI:PRIORITY MAP PROFILE-2 Create
+#
+home
+configure system
+ profile
+ add prio-map-profile 2 "Profile-2" 802.1p
+ back
+ profile
+ configure prio-map-profile prio_map_profile-2
+ cos-map-control enabled
+ default-cos 0
+ edit-prio-map prio_map_profile_pri_entry-2-1 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-2 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-3 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-4 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-5 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-6 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-7 0 none
+ edit-prio-map prio_map_profile_pri_entry-2-8 0 none
+ edit-cos-map 0 0 0
+ edit-cos-map 1 1 1
+ edit-cos-map 2 2 2
+ edit-cos-map 3 3 3
+ edit-cos-map 4 4 4
+ edit-cos-map 5 5 5
+ edit-cos-map 6 6 6
+ edit-cos-map 7 7 7
+#
+#CLI:SNMP COMMUNITY ENTRY Delete
+#
+home
+configure snmp
+ delete community "private"
+#
+#CLI:SNMP COMMUNITY ENTRY Delete
+#
+home
+configure snmp
+ delete community "public"
+#
+#CLI:SAT SAC PROFILE-1 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-1
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-2 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-2
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-3 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-3
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-4 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-4
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-5 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-5
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-6 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-6
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-7 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-7
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SAT SAC PROFILE-8 Edit
+#
+home
+configure system
+ profile
+ configure sac-profile sat_sac_profile-8
+ name "Sac Profile"
+ flr 5.0000
+ ftd 300
+ fdv 300
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "community" readonly
+#
+#CLI:SNMP COMMUNITY ENTRY Create
+#
+home
+configure snmp
+ add community "etn1net" readwrite
+#
+#CLI:XG 1S CC-1-1-2 Create
+#
+home
+network-element ne-1
+ add eqpt xg_1s_cc 2
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ admin-state in-service
+#
+#CLI:XG 1S CC-1-1-3 Create
+#
+home
+network-element ne-1
+ add eqpt xg_1s_cc 3
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ admin-state in-service
+#
+#CLI:NE-1 Edit
+#
+home
+network-element ne-1
+ prompt "NE-1"
+ name "UNIVERSITY-OF-TULSA-XG210"
+ contact ""
+ location ""
+ pm-interval 15min
+ autoprov-mode on
+ admin-state in-service
+ configure tm-params bwp-mode line-rate
+#
+#CLI:PSU-1-1-1 Create
+#
+home
+network-element ne-1
+ add eqpt psu 1
+ configure psu psu-1-1-1
+ alias ""
+ admin-state in-service
+#
+#CLI:PSU-1-1-2 Create
+#
+home
+network-element ne-1
+ add eqpt psu 2
+ configure psu psu-1-1-2
+ alias ""
+ admin-state in-service
+#
+#CLI:FAN-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure fan fan-1-1-1
+ alias ""
+ admin-state in-service
+#
+#CLI:NTEXG210-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ admin-state in-service
+ alias ""
+ snmp-dying-gasp disabled
+#
+#CLI:ECPA CONFIG-1 Edit
+#
+home
+configure system
+ ecpa-streams 1
+ stream-name "stream-1"
+ framesize 1518
+ rate 6981888000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-2 Edit
+#
+home
+configure system
+ ecpa-streams 2
+ stream-name "stream-2"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-3 Edit
+#
+home
+configure system
+ ecpa-streams 3
+ stream-name "stream-3"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-4 Edit
+#
+home
+configure system
+ ecpa-streams 4
+ stream-name "stream-4"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-5 Edit
+#
+home
+configure system
+ ecpa-streams 5
+ stream-name "stream-5"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-6 Edit
+#
+home
+configure system
+ ecpa-streams 6
+ stream-name "stream-6"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-7 Edit
+#
+home
+configure system
+ ecpa-streams 7
+ stream-name "stream-7"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-8 Edit
+#
+home
+configure system
+ ecpa-streams 8
+ stream-name "stream-8"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-9 Edit
+#
+home
+configure system
+ ecpa-streams 9
+ stream-name "stream-9"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-10 Edit
+#
+home
+configure system
+ ecpa-streams 10
+ stream-name "stream-10"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-11 Edit
+#
+home
+configure system
+ ecpa-streams 11
+ stream-name "stream-11"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONFIG-12 Edit
+#
+home
+configure system
+ ecpa-streams 12
+ stream-name "stream-12"
+ framesize 64
+ rate 10048000
+ payload-type fixed
+ dest-mac 00:80:ea:00:00:01
+ outer-vlan-control disabled
+ outer-vlan-tag 4094-1
+ outer-vlan-ethertype 0x8100
+ inner-vlan1-control disabled
+ inner-vlan1-tag 4094-1
+ inner-vlan1-ethertype 0x8100
+ inner-vlan2-control disabled
+ inner-vlan2-tag 4094-1
+ inner-vlan2-ethertype 0x8100
+ ip-version ipv4
+ source-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ target-addr ipv4 0.0.0.0
+ target-addr ipv6 0000:0000:0000:0000:0000:0000:0000:0000
+ prio-map-mode none 0
+ use-port-src-mac enabled
+#
+#CLI:ECPA CONTROL-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ ecpa-ctrl
+ src-port network-1-1-1-1
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 0
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:ECPA CONTROL-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ ecpa-ctrl
+ src-port access-1-1-2-1
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 1
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:ECPA CONTROL-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ ecpa-ctrl
+ src-port access-1-1-3-1
+ inject-direction a2n
+ monitor-direction n2a
+ test-type duration
+ test-duration 00:00:00:10
+ test-num-frames 1
+ test-stream-a 0
+ test-stream-b 0
+ test-stream-c 0
+#
+#CLI:SYNC-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure sync sync-1-1-1-1
+ admin-state in-service
+ network-clock-type option1-sdh
+ selection-mode prio-mode
+ wtr-time 5
+ sync-alias ""
+#
+#CLI:BITS IN-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure bits-in bits_in-1-1-1-1
+ admin-state unassigned
+ bits-line-type e1
+ alias ""
+ line-code e1-hdb3
+ frame-format e1-crc4
+ sa-bit bit4
+ ql-mode disabled
+ back
+ configure bits-in bits_in-1-1-1-1
+ assumed-ql ql-eec1
+ expected-ql ql-none
+#
+#CLI:BITS OUT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure bits-out bits_out-1-1-1-1
+ admin-state unassigned
+ bits-line-type e1
+ freq-source none
+ alias ""
+ squelch-ql ql-none
+ line-build-out none
+ line-code e1-hdb3
+ frame-format e1-crc4
+ sa-bit bit4
+ ql-mode disabled
+#
+#CLI:ACCESS PORT-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ admin-state in-service
+ service-type epl
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure access-port access-1-1-2-1
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 4094-0
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ back
+ back
+ configure access-port access-1-1-2-1
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ back
+ configure access-port access-1-1-2-1
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+ back
+ back
+ configure access-port access-1-1-2-1
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada sada
+ back
+ back
+ configure access-port access-1-1-2-1
+ alias "UNIVERSITY-OF-TULSA-10G-CIR0020039"
+ auto-diagnostic disabled
+ mtu 9600
+ phy-type lan
+ wdmchannel not-tunable
+ traffic-model access-flow
+ ing-cos-prio outer-vlantag
+ default-cos 0
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ pcp-mode none
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ low-latency-queuing disabled
+ priority-mapping-profile prio_map_profile-1
+ a2n-swap-priority-vid disabled
+ n2a-swap-priority-vid disabled
+ swap-priority-vid 1
+home
+configure ptp
+ network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ delay-asymmetry 0
+ back
+ configure access-port access-1-1-2-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter tagged-ptp use-mac-setting
+ cpd-filter untagged-ptp use-mac-setting
+ back
+ configure access-port access-1-1-2-1
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-2-1
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
+#CLI:ACCESS PORT-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ admin-state unassigned
+ service-type epl
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure access-port access-1-1-3-1
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 4094-0
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ back
+ back
+ configure access-port access-1-1-3-1
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ oam-local-mode oam-active
+ back
+ back
+ configure access-port access-1-1-3-1
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+ back
+ back
+ configure access-port access-1-1-3-1
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada swap-tcp-udp
+ back
+ back
+ configure access-port access-1-1-3-1
+ alias ""
+ auto-diagnostic disabled
+ mtu 9600
+ phy-type lan
+ wdmchannel not-tunable
+ traffic-model access-flow
+ ing-cos-prio outer-vlantag
+ default-cos 0
+ afp all-afp
+ rx-pause disabled
+ tx-pause disabled
+ pcp-mode none
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ low-latency-queuing disabled
+ priority-mapping-profile prio_map_profile-1
+ a2n-swap-priority-vid disabled
+ n2a-swap-priority-vid disabled
+ swap-priority-vid 1
+home
+configure ptp
+ network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ delay-asymmetry 0
+ back
+ configure access-port access-1-1-3-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter l2pt-tunnel-mac 01:00:0c:cd:cd:d0
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter tagged-ptp use-mac-setting
+ cpd-filter untagged-ptp use-mac-setting
+ back
+ configure access-port access-1-1-3-1
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-3-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-3-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-3-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-3-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure access-port access-1-1-3-1
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold aufd 0 1day
+ set-threshold apfd 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+#
+#CLI:ACCESS PORT-1-1-3-1 Create
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ delete-all-flows yes
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ traffic-model access-flow
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ admin-state in-service
+ media fiber fixed-10g-full
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure network-port network-1-1-1-1
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 4094-0
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ back
+ back
+ configure network-port network-1-1-1-1
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ alias ""
+ traffic-model access-flow
+ ing-cos-prio outer-vlantag
+ default-cos 0
+ auto-diagnostic disabled
+ mtu 9612
+ phy-type lan
+ wdmchannel f19200(192.00thz_1561.42nm_d32)
+ priority-mapping-profile prio_map_profile-1
+ pcp-mode none
+ low-latency-queuing disabled
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ fec
+ otu-tim-detect
+ otu-tim-ais-insert disabled
+ otu-trace-sapi-expected ""
+ otu-trace-sapi-tx ""
+ otu-trace-dapi-tx ""
+ otu-trace-opsp-tx ""
+ odu-tim-detect
+ odu-tim-ais-insert disabled
+ odu-trace-sapi-expected ""
+ odu-trace-sapi-tx ""
+ odu-trace-dapi-tx ""
+ odu-trace-opsp-tx ""
+ back
+ configure network-port network-1-1-1-1
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada swap-tcp-udp
+ back
+ back
+ configure network-port network-1-1-1-1
+ llf
+ llf-control disabled
+ llf-trigger-event none
+ llf-tx-action-type no-action
+ llf-delay 0
+ local-link-id 1
+ remote-link-ids none
+home
+configure ptp
+ network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ delay-asymmetry 0
+ back
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-0 0 0
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-1 1 1
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-2 2 2
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-3 3 3
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-4 4 4
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-5 5 5
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-6 6 6
+ back
+ configure network-port network-1-1-1-1
+ edit-prio-map network_prio_map-1-1-1-1-7 7 7
+ back
+ configure network-port network-1-1-1-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter tagged-ptp use-mac-setting
+ cpd-filter untagged-ptp use-mac-setting
+ back
+ configure network-port network-1-1-1-1
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-1
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold psc 0 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold ber-bc 1.56e-8 1day
+ set-threshold fec-es 1000 1day
+ set-threshold fec-ses 40 1day
+ set-threshold fec-ce 100000 1day
+ set-threshold fec-ube 10000 1day
+ set-threshold otu-es 1000 1day
+ set-threshold otu-ses 40 1day
+ set-threshold otu-bbe 10000 1day
+ set-threshold otu-uas 40 1day
+ set-threshold odu-es 1000 1day
+ set-threshold odu-ses 40 1day
+ set-threshold odu-bbe 10000 1day
+ set-threshold odu-uas 40 1day
+ set-threshold pcs-es 0 1day
+ set-threshold pcs-cv 0 1day
+ set-threshold pcs-she 0 1day
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ admin-state in-service
+ media fiber fixed-10g-full
+ port-shaped-speed 0
+ port-shaping disabled
+ sync-e-mode disabled
+ ql-mode disabled
+ expected-ql ql-none
+ assumed-ql ql-eec1
+ back
+ configure network-port network-1-1-1-2
+ lpbk
+ inner-vlan1-control disabled
+ inner-vlan2-control disabled
+ inner-vlan3-control disabled
+ outer-vlan1-control disabled
+ outer-vlan2-control disabled
+ outer-vlan3-control disabled
+ inner-vlan1 4094-0
+ inner-vlan2 4094-1
+ inner-vlan3 4094-2
+ outer-vlan1 4094-0
+ outer-vlan2 4094-1
+ outer-vlan3 4094-2
+ back
+ back
+ configure network-port network-1-1-1-2
+ efm-oam
+ oam-disp-type peer
+ oam-control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ alias ""
+ traffic-model access-flow
+ ing-cos-prio outer-vlantag
+ default-cos 0
+ auto-diagnostic disabled
+ mtu 9612
+ phy-type lan
+ wdmchannel f19230(192.30thz_1558.98nm_d29)
+ priority-mapping-profile prio_map_profile-1
+ pcp-mode none
+ low-latency-queuing disabled
+ rx-dei-outer-tag-type ctag-or-stag
+ rx-dei-action use
+ tx-dei-outer-tag-type stag
+ tx-dei-action mark-color
+ fec
+ otu-tim-detect
+ otu-tim-ais-insert disabled
+ otu-trace-sapi-expected ""
+ otu-trace-sapi-tx ""
+ otu-trace-dapi-tx ""
+ otu-trace-opsp-tx ""
+ odu-tim-detect
+ odu-tim-ais-insert disabled
+ odu-trace-sapi-expected ""
+ odu-trace-sapi-tx ""
+ odu-trace-dapi-tx ""
+ odu-trace-opsp-tx ""
+ back
+ configure network-port network-1-1-1-2
+ lpbk
+ block enabled
+ dst-mac-control disabled
+ src-mac-control disabled
+ lpbk-timer 10
+ jdsu-lpbk-control disabled
+ swap-sada swap-tcp-udp
+home
+configure ptp
+ network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ delay-asymmetry 0
+ back
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-0 0 0
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-1 1 1
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-2 2 2
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-3 3 3
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-4 4 4
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-5 5 5
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-6 6 6
+ back
+ configure network-port network-1-1-1-2
+ edit-prio-map network_prio_map-1-1-1-2-7 7 7
+ back
+ configure network-port network-1-1-1-2
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam discard
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ cpd-filter tagged-ptp use-mac-setting
+ cpd-filter untagged-ptp use-mac-setting
+ back
+ configure network-port network-1-1-1-2
+ clb 1
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 2
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 3
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 4
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ clb 5
+ length 0.10
+ description ""
+ control disabled
+ back
+ back
+ configure network-port network-1-1-1-2
+ pm
+ set-threshold abrrx 0 1day
+ set-threshold abrtx 0 1day
+ set-threshold esbf 0 1day
+ set-threshold esbp 0 1day
+ set-threshold esbs 0 1day
+ set-threshold esc 0 1day
+ set-threshold escae 3557280 1day
+ set-threshold esde 3557280 1day
+ set-threshold esf 3557280 1day
+ set-threshold esfs 0 1day
+ set-threshold esj 0 1day
+ set-threshold esmf 0 1day
+ set-threshold esmp 0 1day
+ set-threshold eso 0 1day
+ set-threshold esof 0 1day
+ set-threshold esop 3557280 1day
+ set-threshold esp 0 1day
+ set-threshold esp64 0 1day
+ set-threshold esp65 0 1day
+ set-threshold esp128 0 1day
+ set-threshold esp256 0 1day
+ set-threshold esp512 0 1day
+ set-threshold esp1024 0 1day
+ set-threshold esp1519 0 1day
+ set-threshold esuf 0 1day
+ set-threshold esup 3557280 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold l2cpfp 0 1day
+ set-threshold lbc 0 1day
+ set-threshold opr -80 1day
+ set-threshold opr-variance 4 1day
+ set-threshold opt -80 1day
+ set-threshold opt-variance 4 1day
+ set-threshold psc 0 1day
+ set-threshold temp 0 1day
+ set-threshold uas 0 1day
+ set-threshold poprglitchrejs 0 1day
+ set-threshold poprrtr 0 1day
+ set-threshold poproor 0 1day
+ set-threshold poproov 0 1day
+ set-threshold l2pt-rxframes-encap 0 1day
+ set-threshold l2pt-txframes-decap 0 1day
+ set-threshold ibrmaxrx 0 1day
+ set-threshold ibrmaxtx 0 1day
+ set-threshold ibrminrx 0 1day
+ set-threshold ibrmintx 0 1day
+ set-threshold ibrrx 0 1day
+ set-threshold ibrtx 0 1day
+ set-threshold ber-bc 1.56e-8 1day
+ set-threshold fec-es 1000 1day
+ set-threshold fec-ses 40 1day
+ set-threshold fec-ce 100000 1day
+ set-threshold fec-ube 10000 1day
+ set-threshold otu-es 1000 1day
+ set-threshold otu-ses 40 1day
+ set-threshold otu-bbe 10000 1day
+ set-threshold otu-uas 40 1day
+ set-threshold odu-es 1000 1day
+ set-threshold odu-ses 40 1day
+ set-threshold odu-bbe 10000 1day
+ set-threshold odu-uas 40 1day
+ set-threshold pcs-es 0 1day
+ set-threshold pcs-cv 0 1day
+ set-threshold pcs-she 0 1day
+#
+#CLI:ELMI ACCESS-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI ACCESS-1-1-3-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ELMI NETWORK-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ elmi
+ elmi-control disabled
+ n393 4
+ t392 15
+ async-status enabled
+ min-async-status-interval 1
+#
+#CLI:ENV ALARM INPUT-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-1
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-2
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-3
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:ENV ALARM INPUT-1-1-4 Edit
+#
+home
+network-element ne-1
+ configure env-alm env_alarm_input-1-1-4
+ alm-type miscellaneous
+ alm-notif-code cr
+ alm-descr ""
+ alm-input-mode disabled
+ alm-hold-off enabled
+#
+#CLI:IP SOURCE ADDR CONFIG Edit
+#
+home
+configure communication
+ configure src-addr out-ip-intf-addr "eth0"
+#
+#CLI:IP SYSTEM Edit
+#
+home
+configure communication
+ configure eth0 ip-mode ipv4-only
+ configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
+ configure eth0 rip2Pkts-control disabled
+#
+#CLI:FLOW-1-1-2-1-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ policing enabled
+ policing-control a2n-n2a
+ a2n-prio-mapping-profile prio_map_profile-2
+ n2a-prio-mapping-profile prio_map_profile-1
+ access-interface access-1-1-2-1 network-interface network-1-1-1-1 ctag push 500-0 stag none
+ net-to-acc-rate-limiting disabled
+ innertag-prio-ctrl disabled
+ access-learning-ctrl none
+ access-max-forwarding-entries 16384
+ protect-access-learning none
+ network-learning-ctrl none
+ network-max-forwarding-entries 16384
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ a2n-multicast-rate-limit-ctrl disabled
+ a2n-broadcast-rate-limit-ctrl disabled
+ a2n-combined-rate-limit-ctrl disabled
+ set-sec-block disabled
+ back
+ configure flow flow-1-1-2-1-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam use-mac-setting
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ back
+ configure flow flow-1-1-2-1-1
+ pm
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold es 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold a2nmcfd 0 1day
+ set-threshold a2nbcfd 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 128
+ back
+ back
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+ set-threshold br 0 1day
+ set-threshold fr 0 1day
+ set-threshold abrrlr 0 1day
+#
+#CLI:N2A SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure n2a-shaper n2a_shaper-1-1-2-1-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
+#CLI:A2N POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ color-mode color-aware
+ coupling-flag enabled
+ cbs 0
+ cir 0
+ ebs 1024
+ eir 10000000000
+ back
+ back
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ color-marking enabled
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure n2a-policer n2a_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 128
+#
+#CLI:NETWORK PORT-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ efm-oam
+ oam-local-mode oam-active
+#
+#CLI:NETWORK PORT-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ efm-oam
+ oam-local-mode oam-active
+#
+#CLI:CFM CNTRL-1 Edit
+#
+home
+configure cfm
+ signal-fail-defect-list rdi,rem-ccm
+#
+#CLI:CFM SYSDEF MDLVL-1 Edit
+#
+home
+configure cfm
+ configure sysdef-md
+ md-level 0
+ mhf none
+#
+#CLI:DCN-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure dcn dcn-1-1-1-1
+ admin-state in-service
+ speed auto
+ alias ""
+ mdix auto
+#
+#CLI:MANAGEMENT TUNNEL-1 Create
+#
+home
+configure communication
+ add mgmttunnel 1 "MGMT" network-1-1-1-1 ethernet vlan-based ipv4-only enabled 80 disabled 256000 768000
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ buffer-size 32
+ cos 7
+ rip2Pkts-control disabled
+ back
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ ip-mode ipv4-only
+#
+#CLI:PPS-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure pps-port pps-1-1-1-1
+ alias ""
+ time-of-day-source none
+ admin-state unassigned
+ squelch-ctrl never
+ squelch-ql ql-none
+ delay-compensation 0
+ input-rate pulse-per-sec
+#
+#CLI:TOD-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure tod-port tod-1-1-1-1
+ alias ""
+ time-of-day-source none
+ admin-state unassigned
+ squelch-ctrl never
+ squelch-ql ql-none
+#
+#CLI:CLK-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure 10mhz-port clk-1-1-1-1
+ freq-source none
+ admin-state unassigned
+ alias ""
+ squelch-ctrl never
+ squelch-ql ql-none
+ assumed-ql not-available
+#
+#CLI:MANAGEMENT TUNNEL-1 Edit
+#
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ dhcpv4-control disabled 10.199.192.46 255.255.255.252
+#
+#CLI:MANAGEMENT TUNNEL-1 Create
+#
+home
+configure communication
+ configure mgmttnl mgmt_tnl-1
+ sys-def-gateway 10.199.192.45
+#
+#CLI:LLDP SYS Edit
+#
+home
+configure system
+ lldp
+ trans-interval 30
+ holdtime-multiplier 4
+ reinit-delay 2
+ notification-interval 30
+ tx-credit-max 5
+ message-fast-tx 1
+ tx-fast-init 4
+ max-neighbor-action discard-new
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-2-1-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-2-1-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-2-1-2 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-2-1-2
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-2-1-3 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-2-1-3
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-3-1-1 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-3-1-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-3-1-2 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-3-1-2
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP ACC PORT CONFIG-1-1-3-1-3 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-3
+ configure access-port access-1-1-3-1
+ lldp
+ configure acc-port-config lldp_acc_port_cfg-1-1-3-1-3
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-1-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-1-2
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-1-3 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-1
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-1-3
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-1 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-2-1
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-2 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-2-2
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:LLDP NET PORT CONFIG-1-1-1-2-3 Edit
+#
+home
+network-element ne-1
+ configure nte ntexg210-1-1-1
+ configure network-port network-1-1-1-2
+ lldp
+ configure net-port-config lldp_net_port_cfg-1-1-1-2-3
+ admin-status disabled
+ snmp-notification disabled
+ basic-tlv-supported port-description,sys-name,sys-description,sys-cap
+#
+#CLI:SAT CONTROL-1-1 Edit
+#
+home
+configure sat
+ network-element ne-1
+ configure sat-ctrl sat_control-1-1
+ name "Sat Control"
+ test-mode two-way
+ test-procedure cir,eir,policing,performance
+ test-duration 20
+ step-duration 20
+ step-num 1
+ perf-test-duration 15
+ flpdu-tag-override disabled
+#end
+home
+admin config-file
+# NetworkElement
+# ADVA-NE-1--> show slot-info 1
+# Slot Type : generic-slot
+# Card Type : ntexg210
+# Physical Entity Name : FSP150CC-XG210
+# MAC Address : 00:80:ea:68:21:08
+# Software Revision : 8.5.1-219
+# Firmware Revision :
+# Hardware Revision : 1.05
+# USI : LBADVA71152302810
+# CLEI Code : PENDING
+# Part Number : 1078904401-01
+# Manufacturer Date : 2015-06-10
+# Manufacturer Site : Shenzhen
Index: configs/core1.nor.onenet.net
===================================================================
--- configs/core1.nor.onenet.net (revision 151369)
+++ configs/core1.nor.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at NORMAN1-MX480-RE0> show system commit
+# 2017-03-13 16:15:36 CDT by andrew via cli commit synchronize
# 2017-02-17 20:46:32 CST by andrew via cli commit synchronize
# 2017-02-17 17:42:45 CST by andrew via cli commit synchronize
# 2017-02-13 19:51:02 CST by andrew via cli commit synchronize
# 2017-02-12 17:43:57 CST by andrew via cli commit synchronize
# 2017-02-12 17:23:30 CST by andrew via cli commit synchronize
-# 2017-02-12 17:08:20 CST by andrew via cli commit synchronize
# grnoc-mon at NORMAN1-MX480-RE0> show chassis environment
# Class Item Status Measurement
# Temp PEM 0 OK
@@ -394,7 +394,7 @@
# grnoc-mon at NORMAN1-MX480-RE0> show system uptime
# System booted: 2016-04-03 01:22 CDT
# Protocols started: 2016-04-03 01:28 CDT
-# Last configured: 2017-02-17 20:46 CST by andrew
+# Last configured: 2017-03-13 16:15 CDT by andrew
#
# {master}
# grnoc-mon at NORMAN1-MX480-RE0> show interface terse
@@ -503,7 +503,6 @@
#xe-1/2/1.500 up up
#xe-1/2/1.502 up up
#xe-1/2/1.503 up up
-#xe-1/2/1.666 up up
#xe-1/2/1.2011 up up
#xe-1/2/1.2568 up up
#xe-1/2/1.32767 up up
@@ -665,7 +664,7 @@
#pp0 up up
#tap up up
# grnoc-mon at NORMAN1-MX480-RE0> show configuration
-## Last commit: 2017-02-17 20:46:32 CST by andrew
+## Last commit: 2017-03-13 16:15:36 CDT by andrew
version 13.3R9.13;
groups {
re0 {
@@ -1539,10 +1538,6 @@
address 164.58.29.133/30;
}
}
- unit 666 {
- encapsulation vlan-ccc;
- vlan-id 666;
- }
unit 2011 {
description NORMAN-PS-IPERF-MGMT-CIR0019169;
encapsulation vlan-vpls;
@@ -2335,13 +2330,6 @@
ignore-mtu-mismatch;
}
}
- neighbor 164.58.199.224 {
- interface xe-1/2/1.666 {
- virtual-circuit-id 6969;
- ignore-encapsulation-mismatch;
- ignore-mtu-mismatch;
- }
- }
neighbor 164.58.199.214 {
interface xe-1/2/1.164 {
virtual-circuit-id 2622;
Index: configs/core4.tul.onenet.net
===================================================================
--- configs/core4.tul.onenet.net (revision 151464)
+++ configs/core4.tul.onenet.net (working copy)
@@ -1,12 +1,12 @@
# RANCID-CONTENT-TYPE: juniper
#
# grnoc-mon at TULSA-CORE4-MX480-RE0> show system commit
+# 2017-03-13 16:16:08 CDT by andrew via cli commit synchronize
# 2017-03-13 12:30:47 CDT by sky via cli commit synchronize
# 2017-03-13 12:25:38 CDT by sky via cli commit synchronize
# 2017-03-08 11:33:33 CST by sean via cli commit synchronize
# 2017-03-07 12:28:04 CST by andrew via cli commit synchronize
# 2017-03-06 09:57:06 CST by andrew via cli commit synchronize
-# 2017-03-05 16:24:22 CST by andrew via cli commit synchronize
# grnoc-mon at TULSA-CORE4-MX480-RE0> show chassis environment
# Class Item Status Measurement
# Temp PEM 0 OK
@@ -392,7 +392,7 @@
# grnoc-mon at TULSA-CORE4-MX480-RE0> show system uptime
# System booted: 2016-08-15 04:31 CDT
# Protocols started: 2016-08-15 04:34 CDT
-# Last configured: 2017-03-13 12:30 CDT by sky
+# Last configured: 2017-03-13 16:16 CDT by andrew
#
# {master}
# grnoc-mon at TULSA-CORE4-MX480-RE0> show interface terse
@@ -545,7 +545,6 @@
#xe-1/2/1 up up
#xe-1/2/1.80 up up
#xe-1/2/1.500 up up
-#xe-1/2/1.666 up up
#xe-1/2/1.32767 up up
#xe-1/3/0 up up
#xe-1/3/0.0 up up
@@ -692,7 +691,7 @@
#pp0 up up
#tap up up
# grnoc-mon at TULSA-CORE4-MX480-RE0> show configuration
-## Last commit: 2017-03-13 12:30:47 CDT by sky
+## Last commit: 2017-03-13 16:16:08 CDT by andrew
version 13.3R9.13;
groups {
re0 {
@@ -2102,7 +2101,7 @@
}
}
xe-1/2/1 {
- description "UNIVERSITY-OF-TULSA-DARK-FIBER-CIR000XXXX [ORDERED]";
+ description UNIVERSITY-OF-TULSA-DARK-FIBER-CIR0020039;
flexible-vlan-tagging;
mtu 9192;
encapsulation flexible-ethernet-services;
@@ -2110,7 +2109,6 @@
wavelength 1561.42;
}
unit 80 {
- description "UNIVERSITY-OF-TULSA-NID-MGMT-CIR000XXXX [ORDERED]";
vlan-id 80;
family inet {
mtu 1500;
@@ -2121,7 +2119,7 @@
}
}
unit 500 {
- description "UNIVERSITY-OF-TULSA-1G-CIR000XXXX [ORDERED]";
+ description UNIVERSITY-OF-TULSA-10G-CIR0020039;
vlan-id 500;
family inet {
mtu 1500;
@@ -2131,10 +2129,6 @@
address 164.58.9.121/30;
}
}
- unit 666 {
- encapsulation vlan-ccc;
- vlan-id 666;
- }
}
xe-1/3/0 {
description "DOWNSTREAM L3 10GE to ^ OUHSC Tulsa ^ CIR000XXXX";
@@ -3080,7 +3074,7 @@
unicast;
}
neighbor 164.58.9.122 {
- description "EBGP-UNIVERSITY-OF-TULSA-CIR000XXXX [NO-MONITOR]";
+ description EBGP-UNIVERSITY-OF-TULSA-CIR0020039;
import EBGP-UNIVERSITY-OF-TULSA-V4-IMPORT;
export EBGP-UNIVERSITY-OF-TULSA-V4-EXPORT;
remove-private all;
@@ -3219,13 +3213,6 @@
description CCC-FOR-OSU-20MB;
}
}
- neighbor 164.58.199.230 {
- interface xe-1/2/1.666 {
- virtual-circuit-id 6969;
- ignore-encapsulation-mismatch;
- ignore-mtu-mismatch;
- }
- }
}
lldp {
interface xe-0/0/0;
Index: configs/justice-ps.client.onenet.net
===================================================================
--- configs/justice-ps.client.onenet.net (revision 151468)
+++ configs/justice-ps.client.onenet.net (working copy)
@@ -132,9 +132,9 @@
#sp-0/0/0.16383 up up
#ge-0/0/1 up down
#ge-0/0/1.0 up down
-#ge-0/0/2 up up
-#ge-0/0/2.0 up up
-#ge-0/0/2.32767 up up
+#ge-0/0/2 up down
+#ge-0/0/2.0 up down
+#ge-0/0/2.32767 up down
#ge-0/0/3 down down
#ge-0/0/4 down down
#ge-0/0/5 down down
Index: configs/odot-chandler-regmaint.client.onenet.net
===================================================================
--- configs/odot-chandler-regmaint.client.onenet.net (revision 151458)
+++ configs/odot-chandler-regmaint.client.onenet.net (working copy)
@@ -118,8 +118,8 @@
#sp-0/0/0 up up
#sp-0/0/0.0 up up
#sp-0/0/0.16383 up up
-#ge-0/0/1 up up
-#ge-0/0/1.0 up up
+#ge-0/0/1 up down
+#ge-0/0/1.0 up down
#ge-0/0/2 up down
#ge-0/0/2.0 up down
#ge-0/0/3 up down
Index: configs/core.hut.elr.onenet.net
===================================================================
--- configs/core.hut.elr.onenet.net (revision 151468)
+++ configs/core.hut.elr.onenet.net (working copy)
@@ -27,6 +27,16 @@
# TFEB 0 TBB PFE Chip OK
# TFEB 0 TFEB PCIE TSen OK
# TFEB 0 TFEB PCIE Chip OK
+# TFEB 0 QX 0 TSen OK
+# TFEB 0 QX 0 Chip OK
+# TFEB 0 LU 0 TSen OK
+# TFEB 0 LU 0 Chip OK
+# TFEB 0 MQ 0 TSen OK
+# TFEB 0 MQ 0 Chip OK
+# TFEB 0 TBB PFE TSen OK
+# TFEB 0 TBB PFE Chip OK
+# TFEB 0 TFEB PCIE TSen OK
+# TFEB 0 TFEB PCIE Chip OK
# Fans Fan 1 OK
# Fan 2 OK
# Fan 3 OK
Index: configs/eodls-muskogee-main-office.client.onenet.net
===================================================================
--- configs/eodls-muskogee-main-office.client.onenet.net (revision 151466)
+++ configs/eodls-muskogee-main-office.client.onenet.net (working copy)
@@ -1157,6 +1157,7 @@
# 10.0.0.42 gr-0/0/0.110 Full 10.0.0.42
# 10.0.0.46 gr-0/0/0.111 Full 10.0.0.46
# 10.0.0.50 gr-0/0/0.112 Full 10.0.0.50
+# 10.0.0.54 gr-0/0/0.113 Full 10.0.0.54
# 10.0.0.58 gr-0/0/0.114 Full 10.0.0.58
#
# grnoc-mon at EODLS-Muskogee-Main-Office-ASSET-004937> show bfd session
Index: configs/rpswi1.okc.onenet.net
===================================================================
--- configs/rpswi1.okc.onenet.net (revision 151464)
+++ configs/rpswi1.okc.onenet.net (working copy)
@@ -213,8 +213,8 @@
#ge-0/0/18.0 up up
#ge-0/0/19 up up
#ge-0/0/19.0 up up
-#ge-0/0/20 up up
-#ge-0/0/20.0 up up
+#ge-0/0/20 up down
+#ge-0/0/20.0 up down
#ge-0/0/21 up up
#ge-0/0/21.0 up up
#ge-0/0/22 up up
Index: routers.all
===================================================================
--- routers.all (revision 151264)
+++ routers.all (working copy)
@@ -724,6 +724,7 @@
tuskahoma-ps.nid.onenet.net:fsp150
ub.say.onenet.net:cisco
union-city-ps.client.onenet.net:juniper
+university-of-tulsa.nid.onenet.net:fsp150
vin-adva.p.onenet.net:fsp3000
vinita-public-library-srx220.onenet.net:juniper
wainwright-isd.client.onenet.net:juniper
More information about the Nocrancid
mailing list