[Nocrancid] autopop-onenet.net router config diffs
rancid at rancid.noc.onenet.net
rancid at rancid.noc.onenet.net
Mon Oct 2 23:04:32 CDT 2017
Index: configs/mcalester-ps.nid.onenet.net
===================================================================
--- configs/mcalester-ps.nid.onenet.net (revision 156678)
+++ configs/mcalester-ps.nid.onenet.net (working copy)
@@ -1222,7 +1222,7 @@
network-element ne-1
configure xg_1s_cc xg_1s_cc-1-1-2
configure access-port access-1-1-2-1
- admin-state maintenance
+ admin-state in-service
service-type evpl
port-shaped-speed 0
port-shaping disabled
@@ -1275,7 +1275,7 @@
back
back
configure access-port access-1-1-2-1
- alias ""
+ alias "MCALESTER-PS-1500M-CIR0020320"
auto-diagnostic disabled
mtu 9600
phy-type lan
@@ -1720,7 +1720,7 @@
back
back
configure access-port access-1-1-3-2
- alias "MCALESTER-PS-3G-CIR0020320"
+ alias "MCALESTER-PS-3G-CIR0020320 [DECOM]"
auto-diagnostic disabled
mtu 9600
wdmchannel not-tunable
@@ -3202,19 +3202,6 @@
set-threshold ibrrx 0 1day
set-threshold ibrtx 0 1day
#
-#CLI:ACCESS PORT-1-1-2-1 Create
-#
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- delete-all-flows yes
-home
-network-element ne-1
- configure xg_1s_cc xg_1s_cc-1-1-2
- configure access-port access-1-1-2-1
- traffic-model access-flow
-#
#CLI:NETWORK PORT-1-1-1-1 Edit
#
home
@@ -3886,6 +3873,245 @@
configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
configure eth0 rip2Pkts-control disabled
#
+#CLI:FLOW-1-1-2-1-1 Create
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ add flow flow-1-1-2-1-1 "" regular-evc disabled disabled disabled disabled disabled none none "500-*,501-*" 1500000000 0 access-interface access-1-1-2-1 network-interface network-1-1-1-1
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ circuit-name ""
+ es-frame-loss-threshold 1
+ ses-frame-loss-threshold-ratio 30
+ policing enabled
+ policing-control a2n-n2a
+ a2n-prio-mapping-profile none
+ n2a-prio-mapping-profile none
+ stag none
+ net-to-acc-rate-limiting disabled
+ ctag none
+ untagged-traffic disabled
+ outertag-prio-ctrl disabled
+ innertag-prio-ctrl disabled
+ n2a-outertag-prio-ctrl disabled
+ access-learning-ctrl none
+ access-max-forwarding-entries 16384
+ protect-access-learning none
+ network-learning-ctrl none
+ network-max-forwarding-entries 16384
+ protect-network-learning none
+ aging-timer 300
+ table-full-action forward
+ n2n-forwarding disabled
+ a2n-multicast-rate-limit-ctrl disabled
+ a2n-broadcast-rate-limit-ctrl disabled
+ a2n-combined-rate-limit-ctrl disabled
+ set-sec-block disabled
+ back
+ configure flow flow-1-1-2-1-1
+ cpd-filter isl pass-thru
+ cpd-filter pagp pass-thru
+ cpd-filter udld pass-thru
+ cpd-filter cdp pass-thru
+ cpd-filter vtp pass-thru
+ cpd-filter dtp pass-thru
+ cpd-filter pvstp+ pass-thru
+ cpd-filter uplinkfast pass-thru
+ cpd-filter vlan-bridge pass-thru
+ cpd-filter l2pt pass-thru
+ cpd-filter bpdu use-mac-setting
+ cpd-filter pause use-mac-setting
+ cpd-filter lacp use-mac-setting
+ cpd-filter lacp-marker use-mac-setting
+ cpd-filter efm-oam use-mac-setting
+ cpd-filter ssm discard
+ cpd-filter port-authen use-mac-setting
+ cpd-filter lan-bridges pass-thru
+ cpd-filter elmi use-mac-setting
+ cpd-filter gmrp pass-thru
+ cpd-filter gvrp pass-thru
+ cpd-filter garp pass-thru
+ cpd-filter 01-80-c2-00-00-00 pass-thru
+ cpd-filter 01-80-c2-00-00-01 pass-thru
+ cpd-filter 01-80-c2-00-00-02 pass-thru
+ cpd-filter 01-80-c2-00-00-03 pass-thru
+ cpd-filter 01-80-c2-00-00-04 pass-thru
+ cpd-filter 01-80-c2-00-00-05 pass-thru
+ cpd-filter 01-80-c2-00-00-06 pass-thru
+ cpd-filter 01-80-c2-00-00-07 pass-thru
+ cpd-filter 01-80-c2-00-00-08 pass-thru
+ cpd-filter 01-80-c2-00-00-09 pass-thru
+ cpd-filter 01-80-c2-00-00-0a pass-thru
+ cpd-filter 01-80-c2-00-00-0b pass-thru
+ cpd-filter 01-80-c2-00-00-0c pass-thru
+ cpd-filter 01-80-c2-00-00-0d pass-thru
+ cpd-filter 01-80-c2-00-00-0e pass-thru
+ cpd-filter 01-80-c2-00-00-0f pass-thru
+ cpd-filter nearest-lldp use-mac-setting
+ cpd-filter customer-lldp use-mac-setting
+ cpd-filter non-tpmr-lldp use-mac-setting
+ back
+ configure flow flow-1-1-2-1-1
+ pm
+ set-threshold abra2n 0 1day
+ set-threshold abrrla2n 0 1day
+ set-threshold abrn2a 0 1day
+ set-threshold abrrln2a 0 1day
+ set-threshold l2cpfd 0 1day
+ set-threshold bytesina2n 0 1day
+ set-threshold bytesinn2a 0 1day
+ set-threshold bytesouta2n 0 1day
+ set-threshold bytesoutn2a 0 1day
+ set-threshold es 0 1day
+ set-threshold fmga2n 0 1day
+ set-threshold fmgn2a 0 1day
+ set-threshold fmrda2n 0 1day
+ set-threshold fmrdn2a 0 1day
+ set-threshold fmya2n 0 1day
+ set-threshold fmyn2a 0 1day
+ set-threshold ftda2n 0 1day
+ set-threshold ses 0 1day
+ set-threshold uas 0 1day
+ set-threshold ibra2nmax 0 1day
+ set-threshold ibrrla2nmax 0 1day
+ set-threshold ibra2nmin 0 1day
+ set-threshold ibrrla2nmin 0 1day
+ set-threshold ibra2n 0 1day
+ set-threshold ibrrla2n 0 1day
+ set-threshold ibrn2amax 0 1day
+ set-threshold ibrrln2amax 0 1day
+ set-threshold ibrn2amin 0 1day
+ set-threshold ibrrln2amin 0 1day
+ set-threshold ibrn2a 0 1day
+ set-threshold ibrrln2a 0 1day
+ set-threshold fdhairpin 0 1day
+ set-threshold fdstaticblock 0 1day
+ set-threshold numlearntblflushes 0 1day
+ set-threshold learntblentrydiscards 0 1day
+ set-threshold a2nmcfd 0 1day
+ set-threshold a2nbcfd 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 1024
+ back
+ back
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+ set-threshold br 0 1day
+ set-threshold fr 0 1day
+ set-threshold abrrlr 0 1day
+#
+#CLI:PORT N2A SHAPER-1-1-2-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ buffersize 1024
+#
+#CLI:A2N POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ color-mode color-aware
+ coupling-flag enabled
+ cbs 1024
+ cir 1500000000
+ ebs 0
+ eir 0
+ back
+ back
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ color-marking enabled
+ back
+ back
+ back
+ back
+ back
+ back
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-policer a2n_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:N2A POLICER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure n2a-policer n2a_policer-1-1-2-1-1-0
+ pm
+ set-threshold fmg 0 1day
+ set-threshold fmy 0 1day
+ set-threshold fmyd 0 1day
+ set-threshold fmrd 0 1day
+ set-threshold abr 0 1day
+ set-threshold bytesin 0 1day
+ set-threshold bytesout 0 1day
+#
+#CLI:A2N SHAPER-1-1-2-1-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure flow flow-1-1-2-1-1
+ configure a2n-shaper a2n_shaper-1-1-2-1-1-0
+ buffersize 1024
+#
#CLI:FLOW-1-1-3-1-1 Edit
#
home
@@ -4127,7 +4353,7 @@
network-element ne-1
configure ge_8s_cc ge_8s_cc-1-1-3
configure access-port access-1-1-3-2
- add flow flow-1-1-3-2-1 "" regular-evc disabled disabled disabled disabled disabled none none "500-*,501-*" 1000000000 0 access-interface access-1-1-3-2 network-interface network-1-1-1-1
+ add flow flow-1-1-3-2-1 "" regular-evc disabled disabled disabled disabled disabled none none "511-*" 1000000000 0 access-interface access-1-1-3-2 network-interface network-1-1-1-1
back
back
back
@@ -5802,6 +6028,31 @@
md-level 0
mhf none
#
+#CLI:PORT N2A SHAPER-1-1-2-1-0 Edit
+#
+home
+network-element ne-1
+ configure xg_1s_cc xg_1s_cc-1-1-2
+ configure access-port access-1-1-2-1
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ buffersize 1024
+ back
+ back
+ configure access-port access-1-1-2-1
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ soam-cir 0
+ soam-eir 0
+ back
+ configure n2a-shaper port_n2a_shaper-1-1-2-1-0
+ pm
+ set-threshold bt 0 1day
+ set-threshold btd 0 1day
+ set-threshold fd 0 1day
+ set-threshold ftd 0 1day
+ set-threshold abrrl 0 1day
+ set-threshold bredd 0 1day
+ set-threshold fredd 0 1day
+#
#CLI:PORT N2A SHAPER-1-1-3-2-0 Edit
#
home
More information about the Nocrancid
mailing list