[Nocrancid] autopop-onenet.net router config diffs

rancid at rancid.noc.onenet.net rancid at rancid.noc.onenet.net
Fri Sep 15 10:04:51 CDT 2017


Index: configs/mhsso-tishomingo.client.onenet.net
===================================================================
--- configs/mhsso-tishomingo.client.onenet.net	(revision 156577)
+++ configs/mhsso-tishomingo.client.onenet.net	(working copy)
@@ -145,8 +145,8 @@
 #sp-0/0/0 up up
 #sp-0/0/0.0 up up
 #sp-0/0/0.16383 up up
-#ge-0/0/1 up up
-#ge-0/0/1.0 up up
+#ge-0/0/1 up down
+#ge-0/0/1.0 up down
 #ge-0/0/2 up down
 #ge-0/0/2.0 up down
 #ge-0/0/3 up down
@@ -189,7 +189,7 @@
 #st0 up up
 #tap up up
 #vlan up up
-#vlan.100 up up
+#vlan.100 up down
 # grnoc-mon at MHSSO-TISHOMINGO-MR-CLIENT-OWNED> show configuration 
 ## Last commit: 2017-09-13 16:50:23 CDT by root
 version 12.3X48-D40.5;
Index: configs/mcalester-ps.nid.onenet.net
===================================================================
--- configs/mcalester-ps.nid.onenet.net	(revision 155076)
+++ configs/mcalester-ps.nid.onenet.net	(working copy)
@@ -1222,8 +1222,8 @@
 network-element ne-1
   configure xg_1s_cc xg_1s_cc-1-1-2 
       configure access-port access-1-1-2-1
-        admin-state unassigned
-        service-type epl
+        admin-state maintenance
+        service-type evpl
         port-shaped-speed 0
         port-shaping disabled
         sync-e-mode disabled
@@ -1284,14 +1284,16 @@
         ing-cos-prio outer-vlantag
         default-cos 0
         afp all-afp
-        rx-pause disabled
-        tx-pause disabled
         pcp-mode none
         rx-dei-outer-tag-type ctag-or-stag
         rx-dei-action use
         tx-dei-outer-tag-type stag
         tx-dei-action mark-color
         low-latency-queuing disabled
+        port-vlan-id 1-0
+        n2a-vlan-trunking enabled
+        a2n-push-port-vid enabled
+        n2a-pop-port-vid disabled
         priority-mapping-profile prio_map_profile-1
         a2n-swap-priority-vid disabled
         n2a-swap-priority-vid disabled
@@ -3200,6 +3202,19 @@
           set-threshold ibrrx 0 1day
           set-threshold ibrtx 0 1day
 #
+#CLI:ACCESS PORT-1-1-2-1  Create
+#
+home
+network-element ne-1
+  configure xg_1s_cc xg_1s_cc-1-1-2 
+      configure access-port access-1-1-2-1
+        delete-all-flows yes 
+home
+network-element ne-1
+  configure xg_1s_cc xg_1s_cc-1-1-2 
+      configure access-port access-1-1-2-1
+        traffic-model access-flow
+#
 #CLI:NETWORK PORT-1-1-1-1  Edit
 #
 home
@@ -3871,241 +3886,6 @@
   configure eth0 dhcp-control disabled 192.168.0.2 255.255.255.0
   configure eth0 rip2Pkts-control disabled
 #
-#CLI:FLOW-1-1-2-1-1  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-          circuit-name ""
-          es-frame-loss-threshold 1
-          ses-frame-loss-threshold-ratio 30
-          policing enabled
-          policing-control a2n-n2a
-          a2n-prio-mapping-profile none
-          n2a-prio-mapping-profile none
-          access-interface access-1-1-2-1 network-interface network-1-1-1-1 ctag push 1-0 stag none 
-          net-to-acc-rate-limiting disabled
-          innertag-prio-ctrl disabled
-          access-learning-ctrl none
-          access-max-forwarding-entries 16384
-          protect-access-learning none
-          network-learning-ctrl none
-          network-max-forwarding-entries 16384
-          protect-network-learning none
-          aging-timer 300
-          table-full-action forward
-          n2n-forwarding disabled
-          a2n-multicast-rate-limit-ctrl disabled
-          a2n-broadcast-rate-limit-ctrl disabled
-          a2n-combined-rate-limit-ctrl disabled
-          set-sec-block disabled
-          back
-      configure flow flow-1-1-2-1-1
-          cpd-filter isl pass-thru
-          cpd-filter pagp pass-thru
-          cpd-filter udld pass-thru
-          cpd-filter cdp pass-thru
-          cpd-filter vtp pass-thru
-          cpd-filter dtp pass-thru
-          cpd-filter pvstp+ pass-thru
-          cpd-filter uplinkfast pass-thru
-          cpd-filter vlan-bridge pass-thru
-          cpd-filter l2pt pass-thru
-          cpd-filter bpdu use-mac-setting
-          cpd-filter pause use-mac-setting
-          cpd-filter lacp use-mac-setting
-          cpd-filter lacp-marker use-mac-setting
-          cpd-filter efm-oam use-mac-setting
-          cpd-filter ssm discard
-          cpd-filter port-authen use-mac-setting
-          cpd-filter lan-bridges pass-thru
-          cpd-filter elmi use-mac-setting
-          cpd-filter gmrp pass-thru
-          cpd-filter gvrp pass-thru
-          cpd-filter garp pass-thru
-          cpd-filter 01-80-c2-00-00-00 pass-thru
-          cpd-filter 01-80-c2-00-00-01 pass-thru
-          cpd-filter 01-80-c2-00-00-02 pass-thru
-          cpd-filter 01-80-c2-00-00-03 pass-thru
-          cpd-filter 01-80-c2-00-00-04 pass-thru
-          cpd-filter 01-80-c2-00-00-05 pass-thru
-          cpd-filter 01-80-c2-00-00-06 pass-thru
-          cpd-filter 01-80-c2-00-00-07 pass-thru
-          cpd-filter 01-80-c2-00-00-08 pass-thru
-          cpd-filter 01-80-c2-00-00-09 pass-thru
-          cpd-filter 01-80-c2-00-00-0a pass-thru
-          cpd-filter 01-80-c2-00-00-0b pass-thru
-          cpd-filter 01-80-c2-00-00-0c pass-thru
-          cpd-filter 01-80-c2-00-00-0d pass-thru
-          cpd-filter 01-80-c2-00-00-0e pass-thru
-          cpd-filter 01-80-c2-00-00-0f pass-thru
-          cpd-filter nearest-lldp use-mac-setting
-          cpd-filter customer-lldp use-mac-setting
-          cpd-filter non-tpmr-lldp use-mac-setting
-          back
-      configure flow flow-1-1-2-1-1
-        pm
-            set-threshold abra2n 0 1day
-            set-threshold abrrla2n 0 1day
-            set-threshold abrn2a 0 1day
-            set-threshold abrrln2a 0 1day
-            set-threshold l2cpfd 0 1day
-            set-threshold bytesina2n 0 1day
-            set-threshold bytesinn2a 0 1day
-            set-threshold bytesouta2n 0 1day
-            set-threshold bytesoutn2a 0 1day
-            set-threshold es 0 1day
-            set-threshold fmga2n 0 1day
-            set-threshold fmgn2a 0 1day
-            set-threshold fmrda2n 0 1day
-            set-threshold fmrdn2a 0 1day
-            set-threshold fmya2n 0 1day
-            set-threshold fmyn2a 0 1day
-            set-threshold ftda2n 0 1day
-            set-threshold ses 0 1day
-            set-threshold uas 0 1day
-            set-threshold ibra2nmax 0 1day
-            set-threshold ibrrla2nmax 0 1day
-            set-threshold ibra2nmin 0 1day
-            set-threshold ibrrla2nmin 0 1day
-            set-threshold ibra2n 0 1day
-            set-threshold ibrrla2n 0 1day
-            set-threshold ibrn2amax 0 1day
-            set-threshold ibrrln2amax 0 1day
-            set-threshold ibrn2amin 0 1day
-            set-threshold ibrrln2amin 0 1day
-            set-threshold ibrn2a 0 1day
-            set-threshold ibrrln2a 0 1day
-            set-threshold fdhairpin 0 1day
-            set-threshold fdstaticblock 0 1day
-            set-threshold numlearntblflushes 0 1day
-            set-threshold learntblentrydiscards 0 1day
-            set-threshold a2nmcfd 0 1day
-            set-threshold a2nbcfd 0 1day
-#
-#CLI:A2N SHAPER-1-1-2-1-1-0  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure a2n-shaper a2n_shaper-1-1-2-1-1-0
-            buffersize 128
-            back
-          back
-      configure flow flow-1-1-2-1-1
-        configure a2n-shaper a2n_shaper-1-1-2-1-1-0
-            soam-cir 0
-            soam-eir 0
-            back
-          back
-        back
-      back
-    back
-  back
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure a2n-shaper a2n_shaper-1-1-2-1-1-0
-          pm
-              set-threshold bt 0 1day
-              set-threshold btd 0 1day
-              set-threshold fd 0 1day
-              set-threshold ftd 0 1day
-              set-threshold abrrl 0 1day
-              set-threshold bredd 0 1day
-              set-threshold fredd 0 1day
-              set-threshold br 0 1day
-              set-threshold fr 0 1day
-              set-threshold abrrlr 0 1day
-#
-#CLI:N2A SHAPER-1-1-2-1-1-0  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure n2a-shaper n2a_shaper-1-1-2-1-1-0
-          pm
-              set-threshold bt 0 1day
-              set-threshold btd 0 1day
-              set-threshold fd 0 1day
-              set-threshold ftd 0 1day
-              set-threshold abrrl 0 1day
-              set-threshold bredd 0 1day
-              set-threshold fredd 0 1day
-#
-#CLI:A2N POLICER-1-1-2-1-1-0  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure a2n-policer a2n_policer-1-1-2-1-1-0
-            color-mode color-aware
-            coupling-flag enabled
-            cbs 0
-            cir 0
-            ebs 0
-            eir 0
-            back
-          back
-      configure flow flow-1-1-2-1-1
-        configure a2n-policer a2n_policer-1-1-2-1-1-0
-            color-marking enabled
-            back
-          back
-        back
-      back
-    back
-  back
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure a2n-policer a2n_policer-1-1-2-1-1-0
-          pm
-              set-threshold fmg 0 1day
-              set-threshold fmy 0 1day
-              set-threshold fmyd 0 1day
-              set-threshold fmrd 0 1day
-              set-threshold abr 0 1day
-              set-threshold bytesin 0 1day
-              set-threshold bytesout 0 1day
-#
-#CLI:N2A POLICER-1-1-2-1-1-0  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure n2a-policer n2a_policer-1-1-2-1-1-0
-          pm
-              set-threshold fmg 0 1day
-              set-threshold fmy 0 1day
-              set-threshold fmyd 0 1day
-              set-threshold fmrd 0 1day
-              set-threshold abr 0 1day
-              set-threshold bytesin 0 1day
-              set-threshold bytesout 0 1day
-#
-#CLI:A2N SHAPER-1-1-2-1-1-0  Edit
-#
-home
-network-element ne-1
-  configure xg_1s_cc xg_1s_cc-1-1-2 
-    configure access-port access-1-1-2-1
-      configure flow flow-1-1-2-1-1
-        configure a2n-shaper a2n_shaper-1-1-2-1-1-0
-            buffersize 128
-#
 #CLI:FLOW-1-1-3-1-1  Edit
 #
 home
Index: configs/chisholm-ps.client.onenet.net
===================================================================
--- configs/chisholm-ps.client.onenet.net	(revision 156509)
+++ configs/chisholm-ps.client.onenet.net	(working copy)
@@ -130,8 +130,8 @@
 #ge-0/0/3 down down
 #ge-0/0/4 down down
 #ge-0/0/5 down down
-#ge-0/0/6 up up
-#ge-0/0/6.0 up up
+#ge-0/0/6 up down
+#ge-0/0/6.0 up down
 #ge-0/0/7 up up
 #ge-0/0/7.0 up up
 #fxp2 up up
Index: configs/core4.okc.onenet.net
===================================================================
--- configs/core4.okc.onenet.net	(revision 156616)
+++ configs/core4.okc.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at OKC-CORE4-MX480-RE0> show system commit 
+#   2017-09-15 09:12:22 CDT by aberrios via cli commit synchronize
 #   2017-09-13 19:05:46 CDT by andrew via cli commit synchronize
 #   2017-09-13 09:39:56 CDT by sean via cli commit synchronize
 #   2017-09-13 00:37:24 CDT by joel via cli commit confirmed, rollback in 5mins synchronize
 #   2017-09-12 23:25:24 CDT by joel via cli commit synchronize
 #   2017-09-12 20:23:40 CDT by aberrios via cli commit synchronize
-#   2017-09-12 20:22:20 CDT by andrew via cli commit synchronize
 # grnoc-mon at OKC-CORE4-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -556,7 +556,7 @@
 # grnoc-mon at OKC-CORE4-MX480-RE0> show system uptime 
 # System booted: 2016-10-12 18:12 CDT 
 # Protocols started: 2016-10-12 18:14 CDT 
-# Last configured: 2017-09-13 19:05 CDT  by andrew
+# Last configured: 2017-09-15 09:12 CDT  by aberrios
 # 
 # {master}
 # grnoc-mon at OKC-CORE4-MX480-RE0> show interface terse 
@@ -1510,7 +1510,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at OKC-CORE4-MX480-RE0> show configuration 
-## Last commit: 2017-09-13 19:05:46 CDT by andrew
+## Last commit: 2017-09-15 09:12:22 CDT by aberrios
 version 13.3R9.13;
 groups {
     re0 {
@@ -9598,6 +9598,7 @@
         route 164.58.184.232/30 next-hop 164.58.1.125;
         route 156.110.54.160/28 next-hop 164.58.1.125;
         route 156.110.34.128/30 next-hop 164.58.1.125;
+        route 156.110.46.232/29 next-hop 164.58.0.130;
     }
     router-id 164.58.199.214;
     autonomous-system 5078;
Index: configs/leflore-ps.client.onenet.net
===================================================================
--- configs/leflore-ps.client.onenet.net	(revision 155572)
+++ configs/leflore-ps.client.onenet.net	(working copy)
@@ -117,7 +117,7 @@
 # 
 # grnoc-mon at LEFLORE-PS-LR-004337> show interface terse 
 #Interface Admin Link
-#ge-0/0/0 up up
+#ge-0/0/0 up down
 #gr-0/0/0 up up
 #ip-0/0/0 up up
 #lsq-0/0/0 up up
Index: configs/core.rack59.onenet.net
===================================================================
--- configs/core.rack59.onenet.net	(revision 156554)
+++ configs/core.rack59.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at RACK59-MX480-RE0> show system commit 
+#   2017-09-15 09:37:53 CDT by andrew via cli commit synchronize
 #   2017-09-12 20:24:12 CDT by andrew via cli commit synchronize
 #   2017-09-12 20:22:23 CDT by andrew via cli commit synchronize
 #   2017-09-12 20:12:55 CDT by andrew via cli commit synchronize
 #   2017-09-12 20:02:57 CDT by andrew via cli commit synchronize
 #   2017-09-12 20:01:00 CDT by andrew via cli commit synchronize
-#   2017-09-12 19:59:31 CDT by andrew via cli commit synchronize
 # grnoc-mon at RACK59-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -446,7 +446,7 @@
 # grnoc-mon at RACK59-MX480-RE0> show system uptime 
 # System booted: 2016-03-30 08:27 CDT 
 # Protocols started: 2016-03-30 08:30 CDT 
-# Last configured: 2017-09-12 20:24 CDT  by andrew
+# Last configured: 2017-09-15 09:37 CDT  by andrew
 # 
 # {master}
 # grnoc-mon at RACK59-MX480-RE0> show interface terse 
@@ -521,7 +521,7 @@
 #pfe-4/2/0.16383 up up
 #xe-4/2/0 up up
 #xe-4/2/0.0 up up
-#xe-4/2/1 up down
+#xe-4/2/1 down down
 #xe-4/3/0 up down
 #xe-4/3/1 up down
 #lc-5/0/0 up up
@@ -590,7 +590,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at RACK59-MX480-RE0> show configuration 
-## Last commit: 2017-09-12 20:24:12 CDT by andrew
+## Last commit: 2017-09-15 09:37:53 CDT by andrew
 version 13.3R9.13;
 groups {
     re0 {
@@ -1101,18 +1101,8 @@
         }
     }
     xe-4/2/1 {
-        description "NNI-TO-CABLEONE [ORDERED]";
+        disable;
     }
-    ge-4/2/9 {
-        description "AT-LINK NNI CIR000XXXX [NO-MONITOR]";
-        vlan-tagging;
-        encapsulation flexible-ethernet-services;
-    }
-    ge-4/3/9 {
-        description "CENTRAL-OKLAHOMA-TELEPHONE-CCC-1G-CIR000XXXX [NO-MONITOR]";
-        encapsulation ethernet-ccc;
-        unit 0;
-    }
     xe-5/0/0 {
         description "NETFLIX-C003.OKC002-[AE3-1of2]-10G-CIR0019852";
         gigether-options {
@@ -1740,11 +1730,6 @@
         interface lo0.0;
     }
     l2circuit {
-        neighbor 164.58.199.215 {
-            interface ge-4/3/9.0 {
-                virtual-circuit-id 2542;
-            }
-        }
         neighbor 164.58.199.81 {
             interface xe-4/1/1.602 {
                 virtual-circuit-id 2553;
Index: configs/blackwell-pl.client.onenet.net
===================================================================
--- configs/blackwell-pl.client.onenet.net	(revision 155403)
+++ configs/blackwell-pl.client.onenet.net	(working copy)
@@ -107,8 +107,8 @@
 # total files: 1
 # 
 # grnoc-mon at BLACKWELL-PL-LR-004642> show system uptime 
-# System booted: 2017-08-01 15:02 CDT 
-# Protocols started: 2017-08-01 15:04 CDT 
+# System booted: 2017-09-15 09:18 CDT 
+# Protocols started: 2017-09-15 09:20 CDT 
 # Last configured: 2017-07-23 14:21 CDT  by root
 # 
 # grnoc-mon at BLACKWELL-PL-LR-004642> show interface terse 
Index: configs/core5.tul.onenet.net
===================================================================
--- configs/core5.tul.onenet.net	(revision 156608)
+++ configs/core5.tul.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at TULSA-CORE5-MX480-RE0> show system commit 
+#   2017-09-15 09:21:37 CDT by sean via cli commit synchronize
 #   2017-09-13 13:50:41 CDT by andrew via cli commit synchronize
 #   2017-09-13 00:50:00 CDT by joel via cli commit synchronize
 #   2017-09-12 10:46:34 CDT by joel via cli commit synchronize
 #   2017-09-12 10:45:51 CDT by joel via cli commit synchronize
 #   2017-09-12 10:43:50 CDT by joel via cli commit synchronize
-#   2017-09-11 20:26:53 CDT by joel via cli commit confirmed, rollback in 5mins synchronize
 # grnoc-mon at TULSA-CORE5-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -502,7 +502,7 @@
 # grnoc-mon at TULSA-CORE5-MX480-RE0> show system uptime 
 # System booted: 2016-08-15 04:47 CDT 
 # Protocols started: 2016-08-15 04:53 CDT 
-# Last configured: 2017-09-13 13:50 CDT  by andrew
+# Last configured: 2017-09-15 09:21 CDT  by sean
 # 
 # {master}
 # grnoc-mon at TULSA-CORE5-MX480-RE0> show interface terse 
@@ -992,7 +992,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at TULSA-CORE5-MX480-RE0> show configuration 
-## Last commit: 2017-09-13 13:50:41 CDT by andrew
+## Last commit: 2017-09-15 09:21:37 CDT by sean
 version 13.3R9.13;
 groups {
     re0 {
@@ -9889,6 +9889,11 @@
         vrf-export CORPCOMM-VRF-EXPORT;
         vrf-target target:5078:2635;
         vrf-table-label;
+        routing-options {
+            static {
+                route 172.17.96.0/24 next-hop 10.119.51.25;
+            }
+        }
     }
     DEQ-DATA-L3VPN {
         description DEQ-DATA-L3VPN;
Index: configs/lavern-public-schools.client.onenet.net
===================================================================
--- configs/lavern-public-schools.client.onenet.net	(revision 156614)
+++ configs/lavern-public-schools.client.onenet.net	(working copy)
@@ -110,7 +110,7 @@
 # 
 # grnoc-mon at LAVERN-PUBLIC-SCHOOLS-TAG-004351> show interface terse 
 #Interface Admin Link
-#ge-0/0/0 down up
+#ge-0/0/0 down down
 #gr-0/0/0 up up
 #ip-0/0/0 up up
 #lsq-0/0/0 up up
Index: configs/stringtown-high-school.client.onenet.net
===================================================================
--- configs/stringtown-high-school.client.onenet.net	(revision 156616)
+++ configs/stringtown-high-school.client.onenet.net	(working copy)
@@ -691,7 +691,6 @@
 # OSPF instance is not running
 # 
 # grnoc-mon at STRINGTOWN-HIGH-SCHOOL-TAG-004909> show bfd session 
-quit
 
 0 sessions, 0 clients
 Cumulative transmit rate 0.0 pps, cumulative receive rate 0.0 pps
Index: configs/core5.okc.onenet.net
===================================================================
--- configs/core5.okc.onenet.net	(revision 156616)
+++ configs/core5.okc.onenet.net	(working copy)
@@ -1,12 +1,12 @@
 # RANCID-CONTENT-TYPE: juniper
 #
 # grnoc-mon at OKC-CORE5-MX480-RE0> show system commit 
+#   2017-09-15 09:37:35 CDT by andrew via cli commit synchronize
 #   2017-09-14 12:16:34 CDT by aberrios via cli commit synchronize
 #   2017-09-14 12:11:13 CDT by aberrios via cli commit synchronize
 #   2017-09-14 12:07:24 CDT by aberrios via cli commit synchronize
 #   2017-09-14 11:42:55 CDT by aberrios via cli commit synchronize
 #   2017-09-14 11:42:02 CDT by aberrios via cli commit synchronize
-#   2017-09-14 09:45:10 CDT by aberrios via cli commit synchronize
 # grnoc-mon at OKC-CORE5-MX480-RE0> show chassis environment 
 # Class Item                           Status     Measurement
 # Temp  PEM 0                          OK        
@@ -562,7 +562,7 @@
 # grnoc-mon at OKC-CORE5-MX480-RE0> show system uptime 
 # System booted: 2016-10-12 08:16 CDT 
 # Protocols started: 2016-10-12 08:18 CDT 
-# Last configured: 2017-09-14 12:16 CDT  by aberrios
+# Last configured: 2017-09-15 09:37 CDT  by andrew
 # 
 # {master}
 # grnoc-mon at OKC-CORE5-MX480-RE0> show interface terse 
@@ -638,8 +638,7 @@
 #ge-0/3/5.32767 up up
 #ge-0/3/6 up up
 #ge-0/3/6.0 up up
-#ge-0/3/7 up up
-#ge-0/3/7.0 up down
+#ge-0/3/7 down down
 #ge-0/3/8 down down
 #ge-0/3/8.0 up down
 #ge-0/3/9 up up
@@ -1420,7 +1419,7 @@
 #pp0 up up
 #tap up up
 # grnoc-mon at OKC-CORE5-MX480-RE0> show configuration 
-## Last commit: 2017-09-14 12:16:34 CDT by aberrios
+## Last commit: 2017-09-15 09:37:35 CDT by andrew
 version 13.3R9.13;
 groups {
     re0 {
@@ -1992,9 +1991,7 @@
         }
     }
     ge-0/3/7 {
-        description "CENTRAL-OKLAHOMA-TELEPHONE-CCC-1G-CIR000XXXX [NO-MONITOR]";
-        encapsulation ethernet-ccc;
-        unit 0;
+        disable;
     }
     ge-0/3/8 {
         disable;
@@ -11314,11 +11311,6 @@
         interface lo0.0;
     }
     l2circuit {
-        neighbor 164.58.199.80 {
-            interface ge-0/3/7.0 {
-                virtual-circuit-id 2542;
-            }
-        }
         neighbor 164.58.199.214 {
             interface ge-1/2/7.501 {
                 virtual-circuit-id 2562;
@@ -11356,7 +11348,6 @@
                 ignore-mtu-mismatch;
             }
         }
-        neighbor 164.58.199.68;
         neighbor 164.58.199.62 {
             interface ge-2/2/0.203 {
                 virtual-circuit-id 2603;
Index: configs/doh-blackwell.client.onenet.net
===================================================================
--- configs/doh-blackwell.client.onenet.net	(revision 156544)
+++ configs/doh-blackwell.client.onenet.net	(working copy)
@@ -94,8 +94,6 @@
 # ad0: Device does not support APM
 # ad0: 1006MB <CF 1GB 20100924> at ata2-master WDMA2
 # Trying to mount root from ufs:/dev/ad0s2a
-# WARNING: / was not properly dismounted
-# WARNING: / was not properly dismounted
 # 
 # grnoc-mon at DOH-BLACKWELL-SRX220> show version 
 # Hostname: DOH-BLACKWELL-SRX220 
@@ -112,8 +110,8 @@
 # total files: 1
 # 
 # grnoc-mon at DOH-BLACKWELL-SRX220> show system uptime 
-# System booted: 2017-09-12 10:19 CDT 
-# Protocols started: 2017-09-12 10:22 CDT 
+# System booted: 2017-09-15 09:18 CDT 
+# Protocols started: 2017-09-15 09:20 CDT 
 # Last configured: 2017-06-14 11:09 CDT  by admin
 # 
 # grnoc-mon at DOH-BLACKWELL-SRX220> show interface terse 



More information about the Nocrancid mailing list